Professional Documents
Culture Documents
Pfaff 1025 Sewing Machine Instruction Manual
Pfaff 1025 Sewing Machine Instruction Manual
com
c©j1
00
00
m
.co
es
uid
-g
all
All manuals and user guides at all-guides.com
12356789
4 Contents
Removing the carrying case cover .
Page
Opening the top cover
Removing and opening the swing-out arm
Accessory box and accessory compartment
Electrical connection
Foot control
Placing spool of thread on pin 4
Upper threading 4
Threading the needle 5
Disengaging the sewing mechanism
Bobbin winding
Removing bobbin case and bobbin
Inserting the bobbin
Inserting the bobbin case
Drawing up the bobbin thread
Presser bar lifter
Thread cutter
Thread tensions 10
Regulating the stitch length 11
Reverse sewing 11
Finger-tip controls 1027 12
Finger-tip controls 1025 13
Selecting utility stitches 14
Selecting stretch stitches 14
Utility- and stretch-stitch combinations 1027 •15
Selecting the needle position 15
for straight stitching
Droppingthemachinefeed 16
Changing the needle 16
Changingthesewingfoot 17
Special sewing feet 18
Buttonhole settings 18
Sewing buttonholes 19
Sewing feet 20
Changing the light bulb 21
Cleaningandoiling 21
Trouble shooting 22
All manuals and user guides at all-guides.com
0
c)
All manuals and user guides at all-guides.com
Removing the carrying case cover Opening the hinged top cover
To lift off the carrying case cover, fold the Also fold the handle toward the rear. Swing
handle to the rear, as indicated byan arrow. cover 31 backwards. On Model 1027 a
Then lift the cover off. stitch chart is found on the inside of this
cover (A).
4 N
All manuals and user guides at all-guides.com
m
Tilt up the front of accessory box 46 and
second spool holder and the seam ripper fit
lift it out (A). There is an additional acces
into the box.
sory compartment (B) underneath.
.co
es
uid
I;—
C
-g
.
C
all
0
a
0
2
All manuals and user guides at all-guides.com
3
All manuals and user guides at all-guides.com
4
All manuals and user guides at all-guides.com
5
All manuals and user guides at all-guides.com
Winding the bobbin from a second Winding the bobbin through the needle
spool (A) eye (B)
Disengage the sewing mechanism. Insert Raise the sewing foot and bring the needle
the spool holder and place a spool of thread to its highest point. Disengage the sewing
on it. Place a bobbin on spindle 47 so that mechanism. Place a bobbin on spindle 47
pin Centers slot D. Pull the thread from the so that pin Centers slot D. Draw the needle
spool, lead it around bobbin tension thread under the sewing foot, up and into
stud 55, wind it around the bobbin a few slot 54, and from above around bobbin
times and push the bobbin toward the right tension stud 55. Then wind a few turns of
to start the winder. When the bobbin is full thread on the bobbin.
push it toward the left and take it out. Then Push the bobbin toward the right to start
re-engage the sewing mechanism. the bobbin winder. Push the full bobbin
Leave the top cover open during bobbin toward the left and take it out. Re-engage
winding. the sewing mechanism.
6
All manuals and user guides at all-guides.com
m
latch and take out the bobbin. The bobbin (A>. Then draw the thread into slot B and
cannot fall out as long as you keep latch K under the spring into eye C.
pulled out.
.co
es
uid
-g
all
7
All manuals and user guides at all-guides.com
8
All manuals and user guides at all-guides.com
4—
E
I
10
All manuals and user guides at all-guides.com
m
Straight stitch 5-mm zigzag stitch
11 Pullover stitch 17 Elastic triple zigzag stitch, 3.5 mm
Blindstitch 3.5-mm zigzag stitch
1 2 Closed overlock stitch 1 8 Elastic triple zigzag stitch, 2 mm
Joining stitch 2-mm zigzag stitch
1 3 Overlock stitch 19, 20, 21: Buttons for buttonholing
.co
Shell-edge stitch Button 20 is also used as clearing button for
14 Feather stitch releasing the pushed buttons.
Elastic decorative stitch
1 5 Honeycomb stitch Elastic blindstitch
Elastic stitch Push buttons 15 and 16.
es
uid
-g
all
All manuals and user guides at all-guides.com
13
All manuals and user guides at all-guides.com
L
6
ri J
L
All manuals and user guides at all-guides.com
16
All manuals and user guides at all-guides.com
m
make sure stud B enters slot C. Place the B fits in slot C. Hole E and screw Dare used
sewing foot under the sewing foot holder for attaching an edge guide. Screw F serves
and hold it in place with your left hand. to secure the sewing foot holder on the
presser bar.
.co
es
uid
-g
all
17
All manuals and user guides at all-guides.com
Sewing buttonholes
Pull the bottom of the buttonhole foot for 4 Push button 20 and keep it depressed
ward as far as it will go. until the machine has sewn 4 to 6 ba
1 Sew first buttonhole seam. Turn hand tacking stitches. Raise the needle. Then
wheel torward you to raise the needle. release the button.
2 Push button 20 and keep it depressed 5 Sew a few tying stitches. Turn the hand
until the machine has sewn 4 to 6 bar- wheel toward you until the take-up leve
tacking stitches. Raise the needle. Then is up. Remove the fabric, pull the fille
release the button. cord taut and trim.
3 Push button 21 Sew the second button
. 6 Cut the buttonhole open.
hole seam the same length as the first.
Raise the needle.
1
All manuals and user guides at all-guides.com
Sewing feet
A Normal sewing foot E Zipper foot
B Clear-view foot F Blindstitch foot
C Buttonhole foot G Darning foot
D Hemmer foot H Guide
A
98-694 563-00
98-694
D
98-694 401-00
20
All manuals and user guides at all-guides.com
21
All manuals and user guides at all-guides.com
Trouble shooting
m
.co rCa use:
Thread Chart.
3. Needle breaks
Needle not pushed up as far as it will go. Insert new needle and push it up as far as
it will go.
Needle bent. Insert new needle.
all
Needle too thin or too thick. See Needle and Thread Chart.
Needle bent and strikes needle plate Let machine feed the work alone.
because work is pushed or pulled. Only guide the material lightly.
Bobbin case improperly inserted. When inserting the bobbin case, press
against it until it snaps into place.
22
All manuals and user guides at all-guides.com
4Cause: Remedy:
23