Professional Documents
Culture Documents
Vogamax Mist Machine M1 Instruction Manual
Vogamax Mist Machine M1 Instruction Manual
MACHINE MANUAL
BACK VIEW
SIDE VIEW
FRONT VIEW
Set Up / Assembly 04
Component Parts 06
Control panel 07
Maintenance 08
2 x Hose Fasteners
1 x Power Cable
01.
Attach the Steel Hose Holders
With the bracket facing the back. Screw and
tighten with the bolt nut from the bottom.
Repeat for the second holder.
02.
Attach the Extendable Hose
First loop the metal fasteners into the Outflow
outlets. Next attach the extendable hose 90
degrees facing up. Squeeze the fastener to
release and push the extendable hose all the
way in before releasing to secure tightly.
Repeat for the second extendable hose.
03.
Clip on the Extendable Hose to the
Steel Bracket.
04.
Attach the Waste Water Bottle.
The outlet can be found at the back of the
compartment on the left after opening the
hatch behind the machine.
05.
Attach the Water Bottle Funnel.
Unscrew the bottle and fill it with filtered or
distilled water. Screw on the cap with the
funnel tightly and invert it to insert into the
water tank.
06.
Attach the Power Cable.
Holder
Tube
Control panel
Outfall ON/OFF
04. Select the Mode or manually adjust the Mist Volume, Temperature and Time
to suit the service provided.
THINGS TO NOTE:
If you are starting the machine for the first time, allow some time for the water to fill up
the tank from the water bottle. You might require to refill the Water Bottle for the first
time of usage. If you see an error on the Timer “E 1”, this means the machine is low on
water level.
The machine has an inbuilt heater, even though the machine starts instantly, the
temperature at the start may not be the selected temperature as it takes awhile for the
water to heat to the desired temperature.
MAINTENANCE