Professional Documents
Culture Documents
MS Scissor Lift Operation
MS Scissor Lift Operation
MS Scissor Lift Operation
Purpose
Scope
Responsibility
1. No person other than the authorized operator(s) is allowed to operate the scissor lift.
2. Daily pre-use check by the operator, stop operation if there is any malfunction or
damage of scissor lift and report to supervisor immediately.
4. Scissor Lift must not be operated unless certified 'Serviceable' by the authorized
Mechanic or Vendor.
6. Prior operation, observe nobody is nearby the scissor lift dangerous zone or position.
7. Alert the people nearby the danger zone by alarm, horn or siren.
8. Make awareness to all workers not to lean against or stay behind the scissor lift
dangerous position.
9. Do not operate the scissor lift for purposes other than its intended use.
11. Ensure of safety harness is used and hooked on a rigid point during operation of
scissors lift.
12. Shut down the scissor lift when not in use and park it in designated place and set the
brake on.
**THE END**
Page 2 of 2