Professional Documents
Culture Documents
X5 212x180mm EN
X5 212x180mm EN
Working Temperature:
32°F to 104°F/0°C to 40°C
Mini Bluetooth Barcode Scanner Wired ,wireless and bluetooth triple-mode freely Wireless protocol:bluetooth 2.4G Storage Temperature:
-40°F to 140°F/-40°C to 80°C
User Guide
switching. Memory: 16Mb Humidity:
5% to 95% relative humidity
Large capacity storage, safe and reliable. Processor: ARM Cortex 32bits (no condensation)
Stores barcodes more than 50000pcs off-line scanning.
Bluetooth version: Bluetooth 4.1Module Ruggedness: Resist about many times drops from
Unique power management system, ultra-long
Supported symbologies: 1D: Codabar,Code 11, 1.5m to concrete ground
standby time.
Code93,MSI,Code 128,UCC/EAN-128,Code 39,EAN-8, Ambient Light Immunity:
Under normal office and
Rich symbologies supported
EAN-13,UPC-A,ISBN,Industrial 25,Interleaved 25, factory ambient lighting conditions, or exposed to
Adopting imported trigger button, long lifespan,
fitting perfectly in your hand for comfortable use. Standard 25,2/5 Matrix, the sun won’
t take any effect to it.
Support Android/IOS devices/Windwos 2D:QR,DataMatrix,PDF417,Aztec,Hanxin , Electrostatic discharge: In line with 15KV air discharge
Support HID、SPP、BLE protocol Micro PDF417(option) and 8KV contact discharge requirements
Mini size, fashion design,and portable Indicator: Led、Buzzer、Vibrator(option)
Ultra low power consumption and standby time Button Description
Battery capacity:650mA
setup available
Charging voltage/current: 5V/1A
Bluetooth transmission distance:15m (indoor)
Endurance:1D≤12H 2D≤8H(5seconds/scan)
Support upload data and charge the battery via
Charge time:≤2hours
USB cable at the same time. Scan Button Indicator Light
Standby: >30days
Bluetooth Pairing STEPS 2.4G Pairing Steps Operating Mode Operating Mode
Pair with operating system(Including Android、 PC terminals ,like desktop computer, which is In normal mode, the scans are uploaded directly to Upload the stored data by scanning the "Data Upload"
not equipped with bluetooth,need to pair with computer via USB cable or WIFI dongle. If succeeds, barcode. After data upload, it won’
t delete the barcode
ios、win system)that with Bluetooth function :
barcode scannner will make a low-frequency short tone. on the scanner automatically.So the user can scan the
Dongle,Dongle Pairing Steps as follow:
A: Start the scanner and long press for 8 seconds If it fails, there willl be three low frequency short tones “data upload”many time to upload the data.
A:Scan Dongle setup barcode to alarm. In normal mode, if fails, the data will be lost.
or scan the bluetooth pairing setup barcode to
You can scan below:
enter the bluetooth search mode.
Data Upload
Note: When the scanner enters the state of matching Note: When the scanner enters the state of matching
clear data
and it does not pair with bluetooth successfully within and it does not pair with dongle successfully within storage mode
1 minute, there is 2 times long low sound indicated 1 minute, there is 2 times long low sound indicated By scan“Total amount of stored barcode”barcode, to
failing match and return to scanning mode. failing match and return to scanning mode. check the total amount of scanned barcodes in storage:
(Or trigger twice to exit match mode and revert to scanning state) (Or trigger twice to exit match mode and revert to scanning state)
Plug usb and it cannot pair with dongle anymore Plug usb and it cannot pair with dongle anymore
Total amount of stored barcode
End Character Settings Standby Time Settings Language Settings Disclaimer
Choose the end character you need to add The company does not assume any responsibility
for losses caused by natural disasters (such as earthquakes,
English floods, etc.) that exceed our ability to act.
Standby after 1 min
The company is not responsible for any product
Add CR liability associated with or arising from the application
or use of any product, circuit, or other application
German
Standby fastly
Only for PC American Keyboard output
Capital and Lowcase Switch Pull up and Hide IOS Keyboard Bluetooth protocol LED Indicator
Select the desired communication bluetooth
protocol barcode indicator color description
Pull up and Hide IOS Keyboard blue light flicker and Read barcode successfully
extinct fastly and make a short sound
Transfer to Lowcase Set
red light-the charge Red light on means Charging
bluetooth HID mode
Trigger twice to pull up iOS keyboard lamp state,after full,it will be off.
Buzzer
Trigger twice to disable iOS keyboard
Sound and Vibration Setting bluetooth BLE mode Sound Type Description
Turn off Swith
Select the setup barcode you demand Note: Scan above barcode to enter the bluetooth a long sound
(First low then high frequency ) Means power on
searching state
a long sound