Professional Documents
Culture Documents
Pe483-Df6811e (Peno Ir)
Pe483-Df6811e (Peno Ir)
Description Features
◆ High integration,all SMTs in small size.
DF6811E is a high current precision Linear LED
◆ No ECAPs and magnetics
Driver , integrated with High Voltage
◆ Integrated with 500V HV MOS, saved on safety
regulation switchers and JFET supply, specially components.
designed for AC line LED strings forwarded with ◆ Fast startup
high voltage and low current. ◆ LED current set by external resistors with ±5%
accuracy.
In application, it supports a quite small BOM
◆ On chip thermal regulation.
benefit from no ECAP and no Magnetics, compile ◆ Compensation for line regulation
with EMI and safety standard. ◆ In ESOP8 package.
DF6811E can drive precision constant current by
option of an external resistor, and set up the
Application
LED strings in group linear compile with THD
performance. Typical 40mA LED current is optimized ◆ GU10/E27 LED retrofit lamps
for 220V line voltage. ◆ LED candle
◆ Other LED lighting
Typical Application
8
6
7
5
NC
NC
NC
DF6811E
GND 1
CS
NC
NC
2
DF6811E_EN_DS_Rev.1.0 1
DF6811E
High Voltage Linear LED Driver
Order Information
Tape DF6811E
DF6811E ESOP8 -40 ℃to105 ℃ XXXXXY
4,000 pcs/reel WXYYC
CS DF6811E D
XXXXXY
WXYYC
NC NC
NC NC
Pin Descriptions
Pin No. Pin Name Descriptions
1 GND IC ground
DF6811E_EN_DS_Rev.1.0 2
DF6811E
High Voltage Linear LED Driver
ESD (Note 3) 2 KV
Note 1: Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. Under “recommended operating
conditions” the device operation is assured, but some particular parameter may not be achieved. The electrical characteristics table defines the operation
range of the device, the electrical characteristics is assured on DC and AC voltage by test program. For the parameters without minimum and maximum
value in the EC table, the typical value defines the operation range, the accuracy is not guaranteed by spec.
Note 2: The maximum power dissipation decrease if temperature rise, it is decided by TJMAX, θJA, and environment temperature (TA). The maximum power
dissipation is the lower one between PDMAX= (TJMAX-TA)/ θJA and the number listed in the maximum table.
DF6811E_EN_DS_Rev.1.0 3
DF6811E
High Voltage Linear LED Driver
Operation Current
Current Sense
Thermal Regulation
Thermal
TREG 150 ℃
Regulation
Note 4: Production testing of the chip is performed at 25°C.
Note 5: The maximum and minimum parameters specified are guaranteed by test, the typical value are guaranteed by design, characterization and statistical
analysis
DF6811E_EN_DS_Rev.1.0 4
DF6811E
High Voltage Linear LED Driver
Block Diagram
VREF
GND Current D
control
Reference
control
Thermal
regulaiton
CS
DF6811E_EN_DS_Rev.1.0 5
DF6811E
High Voltage Linear LED Driver
Package
DF6811E_EN_DS_Rev.1.0 6