Professional Documents
Culture Documents
6261 - Steam Blowing Target Plate
6261 - Steam Blowing Target Plate
G en 5 1CWN002896
Material: St 37
ASTM A36
ASTM A516Gr70
Hardness: approximately 110 -120 HB
>10 D
DN L [ mm ] B [ mm ]
100 90 15
150 135 20
200 180 25
250 225 30
300 270 35
350 315 40
400 360 45
VD002521
Revision: Language: Page:
G en 6 1CWN002896
Adequate cleanliness of the steam piping was achieved by complying with the conditions below:
a) Two successive blasts must result in mirror surfaces that have no strikes that are outside the
assessment limits stated below.
b) After a cooling-down period of at least 12 hours, two more successive blasts must result in mirror
surfaces that have strikes that comply with the stated assessment limits.
Not more than 2 strikes with diameters greater than 0.4 mm per 2500 mm²
Not more than 10 strikes with diameters greater than 0.2 mm per 2500 mm²
VD002521