Professional Documents
Culture Documents
Spectral m800 Mkii
Spectral m800 Mkii
Spectral m800 Mkii
USER MANUAL
43530-43531-43532
LED MODULE 20 19 18
R:3Wx14
¢ G:3Wx14 IP2X
B:3Wx14
AC100~240V
50/60Hz
-20~45 4.8 245x205x245 50 17
16
R:3Wx14 13 14 15
12
¢ G:3Wx14 IP66 11
B:3Wx14 10
9
8
7
6
245mm 5
245mm 4
3
2
1
205mm
No ITEM No ITEM
1 Front cover 10 Display PCB
2 Rubber seal 11 Display clear plate
13mm 3 Clear glass 12 Button seal
30mm 30mm
4 Lens completed set 13 Casing
5 LED PCB 14 Adjusting stainless steel knob
6 Heat sink 15 Power cable socket
7 Power supply 16 DMX cable socket
8 Driver PCB 17 Main support
9 Power connection board 18 Secondary support
1 18
AR1.S ¡Ensure that all parts of the equipment are kept clean and free of dust.
CHANNEL VALUE FUNCTION
1 0 255 DIMMER
2 0 255 RED
3 0 255 GREEN
4 0 255 BLUE
5 0 255 STROBE
HSV
CHANNEL VALUE FUNCTION
1 0 255 HUE
2 0 255 SATURATION
3 0 255 VALUE
17 2
HANGING 21 30 AUTO01
31 40 AUTO02
The fixture can be mounted in a
41 50 AUTO03
hanging position using the supporting
bracket. The bracket should be 51 60 AUTO04
secured to the mounting truss or 61 70 AUTO05
structure using a standard mounting 71 80 AUTO06
clamp. Please note that when hanging
81 90 AUTO07
the unit a safety cable should also be 11
used. 91 100 AUTO08
101 110 AUTO09
AUTO SPEED
12
0 255 Since the walking speed (slow to fast)
DIMMER SPEED
2.2 POWER CONNECTIONS 0 9 RETURN SETTINGS
10 29 NORMAL
@ 220V: 24 units may be connected in series 30 69 DIM 1
70 129 DIM 2
13
@120V: 12 units may be connected in series 130 189 DIM 3
190 255 DIM 4
3 16
80 89 8
90 99 9
DMX512
10 CONTROLLER
100 109
110 119 11
The figure above shows a simple DMX512
120 129 12 layout with the starting address of the first
unit set at 1, with the second set at (Nx1)+1and
130 139 13 so on... (Note that when used in this way,
14 the Ch10 ID function must be inactive (CH10=0))
140 149
150 159 15
160 169 16
170 179 17
180 189 18
190 199 19
200 255 20
15 4
5 14
201 210
CUSTOM09
211 220
CUSTOM10 AT.10
NO FUNCTION PR .01
221 255
PR .02
AUTO SPEED
8
0 255 Since the walking speed (slow to fast)
PR .10
DIMMER SPEED
0 9 RETURN SETTINGS
10 29 NORMAL ¡ Select the target¡AUTO¡ program and press¡ENTER¡.
30 69 DIM 1
¡ Programs¡AT.01¡to¡AT.10¡are fully pre-programmed and will not be
altered by changes in¡EDIT ¡mode.
70 129 DIM 2
9 ¡ Programs ¡PR.01¡to¡PR.10¡are fully pre-programmed and can be edited
130 189 DIM 3 in ¡EDIT ¡mode.
190 255 DIM 4
13 6
CLASSIC STROBE
MENU PER S TOUR
0 9 0
TR16
AR C.1 10 19 1
AR 1. d
20 29 2
AR 1. S
HS V 30 39 3
40 49 4
¡ Enter the¡PERSONALITY¡mode to select DMX mode:¡ TOUR ¡¡ TR16 ¡£ 50 59 5
¡ ARC.1 ¡£¡ AR1.d ¡£¡ AR1.S ¡ , ¡ HSV ¡ 6
60 69 6
70 79 7
80 89 8
3.8 EDITING CUSTOM PROGRAMS 90 99 9
10
MENU ED IT PR .01 SC .01 R(0~2 55) 100 109
150 159 15
¡ Enter the¡EDIT ¡mode to edit the custom programs¡PR.01¡to ¡PR.10¡.
¡ Each custom program has 30 steps that can be edited. 160 169 16
¡ Each step allows the creation of a scene using RED ¡Red¡, GREEN ¡Green¡, 170 179 17
BLUE ¡Blue¡, STRB¡Strb¡,TIME¡Time¡ & FADE¡Fade¡. 18
180 189
190 199 19
200 255 20
7 12
11
8
MENU KEY ON
1: OFF OFF
1 2: Cv1
2
3
4
3: CV3 ¡ Enter the¡KEY¡mode to select whether the access password is on or off.
¡ When the fixture is set as PASS ¡ON¡, after 30 seconds or turn on the fixture
4: Cv4 next time, the fixture will need an access password to enter the display menu
control.
wT.11
CA L2 RGBw R(0~255)
G(0~255)
b(0~255)
CALR **** CALR OK
9 10