Professional Documents
Culture Documents
Espressif Module Packaging Information en
Espressif Module Packaging Information en
Espressif Module Packaging Information en
Version 1.4
Espressif Systems
Copyright © 2024
.espressif.com
www
About This Document
This document describes the package and silk marking of Espressif modules.
Release Notes
Certi cation
Download certi cates for Espressif products from
h tps:// .espressif.com/en/certi cates.
1
1
1
1
1
t
t
1
0
3
2
4
fi
www
www
fi
fi
fi
fi
fi
fi
Table of Contents
1. Module Packaging ..................................................................................................1
1.1. Tape and Reel Speci cations .......................................................................................1
1. Module Packaging
Espressif modules are packaged on tape and reel. Then the reel is packed in an
aluminum moisture barrier bag (MBB) in vacuum state to protect modules from
absorbing moisture during transportation and storage. At last, the MBB is packed into
a pizza box.
Figure 1-1 and Table 1-1 show the carrier tape speci cations of typical Espressif
modules.
📖 Note:
3. The Figure 1-1 above is for illustration purposes only. Actual product may vary.
1/8
Espressif Submit Documentation Feedback 2024.01
fi
fi
fi
f
fi
f
fi
1. Module Packaging
Figure 1-1 and Table 1-2 show the reel speci cations of typical Espressif modules.
Reel Size Outer Diameter (mm) Inner Diameter (mm) Reel Width (W) (mm)
📖 Note:
2. The quantity per tape of typical Espressif modules is 650, but can be di ferent from modules.
For example,
2/8
Espressif Submit Documentation Feedback 2024.01
3
8
0
2
8
9
1
6
fi
3
2
fi
fi
5
fi
f
1. Module Packaging
Inside of the pizza box of typical Espressif modules, the following items are also
packed together with the tape and reel:
Table 1-3. Items and Labels inside the Moisture Barrier Bag
3 Desiccant 3g
3/8
Espressif Submit Documentation Feedback 2024.01
fi
1. Module Packaging
4/8
Espressif Submit Documentation Feedback 2024.01
fi
fi
fi
fi
fi
fi
fi
fi
fi
fi
fi
fi
fi
2. Module Marking
2. Module Marking
Each Espressif module has a silk marking on its shielding case, providing information
such as module name, ash size, and operating temperature.
3 Certi cation ID Indicates the certi cation this module has passed
5/8
Espressif Submit Documentation Feedback 2024.01
fi
fi
fi
fi
fl
2. Module Marking
Figure 2-2 below demonstrates how to understand the Speci cation Identi er on
module marking:
2 digits:
1 digit:
Temperature • N: 85℃/65℃
• H: 105℃
1 digit or 2 digits:
• 2: 2 MB
Flash Size • 4: 4 MB
• 8: 8 MB
• 16: 16 MB
• 32: 32 MB
1 digit:
PSRAM
• R: PSRAM inside
1 digit:
PSRAM Size • 2: 2 MB
• 8: 8 MB
6/8
Espressif Submit Documentation Feedback 2024.01
fi
fi
t
t
fi
fi
fi
fi
fi
fi
fi
2. Module Marking
📖 Note:
1. Product Status:
• Both XX and MN are used to indicate mass production products.
‣ XX is used for products launched earlier;
‣ MN is commonly used for newly launched products or products with new ECOs launched.
For example, M , M or MA, MB….
• Examples of other possible codes can be E , D , and P , indicating this is an NPI product
under development or in trail run.
2. The PSRAM and PSRAM Size elds only exist if this module comes with PSRAM. For example,
• XXN : indicates the module comes with 4 MB ash and no PSRAM.
7/8
Espressif Submit Documentation Feedback 2024.01
4
4
2
f
t
0
1
fi
1
fl
2
fl
3
Disclaimer and Copyright Notice
Information in this document, including URL references, is subject to change without notice.
ALL THIRD PARTY’S INFORMATION IN THIS DOCUMENT IS PROVIDED AS IS WITH NO
WARRANTIES TO ITS AUTHENTICITY AND ACCURACY.
NO WARRANTY IS PROVIDED TO THIS DOCUMENT FOR ITS MERCHANTABILITY, NON-
INFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, NOR DOES ANY WARRANTY
OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE.
All liability, including liability for infringement of any proprietary rights, relating to use of
information in this document is disclaimed. No licenses express or implied, by estoppel or
otherwise, to any intellectual property rights are granted herein.
The Wi-Fi Alliance Member logo is a trademark of the Wi-Fi Alliance. The Bluetooth logo is a
registered trademark of Bluetooth SIG.
All trade names, trademarks and registered trademarks mentioned in this document are property
www.espressif.com of their respective owners, and are hereby acknowledged.
Copyright © 2024 Espressif Systems (Shanghai) Co., Ltd. All rights reserved.