Professional Documents
Culture Documents
Introduction
Introduction
The designing an amplifier observes 3 key objectives for quality output and working;
Maximise gain of the amplifier ; which is directly propotional to the collector current (Ic)
Maximise swing ; which is directly propotional to Vce.
Minimise reliance of Beta in the circuit design.
The value of collector current is 10mA and its equivalent Beta is 75.
The gain provided is both the voltage gain and current gain in Decibels.
The circuit design parameters are taken under room temperature 25degrees.
The value of the output impedance of the transistor (ro) is infinite hence its open circuited.
BW = FH –FH
Hence BW = 50000 -200 = 49800 Hz
(f) Bode plot of the simulator is as above with FH = 74.93MHz and FL = 1000 Hz
References;