Professional Documents
Culture Documents
Ycm FV Series
Ycm FV Series
Ycm FV Series
HIGH SPEED
HIGHHIGH
SPEED HIGHPERFORMANCE
PERFORMANCE MACHINING VERTICAL CENTER
MACHINING VERTICAL CENTER
The YEONG CHIN FV-Series
High-Speed, High-Power Vertical Machining Centers are specially designed for
industries that demand high precision, high productivity application such as automotive,
aerospace, electronic, and job shop industries.
1
* Optional functions under FANUC 18 i-MB control system.
HEIDENHAIN HEIDENHAIN
ACCOM ACCOM
Error: 6μ Error: 6μ
F:600mm/min. F:5,000mm/min.
F:23.62ipm F:196.85ipm
2
Unique Spindle
HIGH
H IGHSS
PEED
PEEDIDD
HIGH
HIGH PDesign
PERFORMANCE MACHINING
MACHINING
ERFORMANCE VERTICALVCERTICAL
ENTER CENTER
Unique direct coupled spindle design could isolate heat source, reduce the
thermal deformation, increase the spindle precision and prolong spindle life.
Isolated polyurethane flexible coupling is used between motor and spindle.
Optional spindle cooling system could achieve better accuracy control.
Direct power transfer from spindle shaft to the cutting edge, ensures the power
efficiency. Detecting the spindle speed from the build-in encoder of spindle
ensures the best performance of rigid tapping.
FV56T (30#)
FV56A/85A/102A/125A (40#)
3
Various High-Speed Spindle Options for Selection to Meet the
Utmost Machining Requirements.
HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER
4
High Efficiency
HIGH SPEEDUtmost
HIGH PERFORMANCEperformance
MACHINING VERTICAL CENTER
Integration, Solution & Automation
■
APC feed rate is adjustable to appropriate speed for
different work pieces' demand.
5
/
HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER
■ The extra wide column base and machine base maximize the cutting rigidity, and enhance machine stability during
heavy-duty machining.
■ Hardened & ground ballscrews are precisely pre-tensioned at both ends, supported by angular contact thrust
bearings, and directly coupled with high responsive AC servomotors of backlash-free for outstanding positioning
repeatability and accuracy during long machining cycles.
■ All axes utilize the newly developed NR type linear motion guide ways from THK of its superior rigidity, low friction,
low noise, thus to assure much smoother movement in high-speed traverse.
■ All linear motion guide ways are mounted on the very fine surface for maximum surface contact and exceptional
cutting rigidity and stability.
FV56T
Headstock
e
n Bas
olum
Wide C
Extra
6
/
/
HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER
■ The extra wide column base and machine base maximize the cutting rigidity, and enhance machine stability during
heavy-duty machining.
■ Hardened & ground ballscrews are precisely pre-tensioned at both ends, supported by angular contact thrust
bearings, and directly coupled with high responsive AC servomotors of backlash-free for outstanding positioning
repeatability and accuracy during long machining cycles.
■ All axes utilize the newly developed NR type linear motion guide ways from THK of its superior rigidity, low friction,
low noise, thus to assure much smoother movement in high-speed traverse.
■ All linear motion guide ways are mounted on the very fine surface for maximum surface contact and exceptional
cutting rigidity and stability.
Base
Co lumn
Wide
Extra
■ The extra wide column base and machine base maximize the cutting rigidity, and enhance machine stability during
heavy-duty machining.
■ Hardened & ground ballscrews are precisely pre-tensioned at both ends, supported by angular contact thrust
bearings, and directly coupled with high responsive AC servomotors of backlash-free for outstanding positioning
repeatability and accuracy during long machining cycles.
■ All axes utilize the newly developed NR type linear motion guide ways from THK of its superior rigidity, low friction,
low noise, thus to assure much smoother movement in high-speed traverse.
■ All linear motion guide ways are mounted on the very fine surface for maximum surface contact and exceptional
cutting rigidity and stability.
se
mn Ba
Wide Colu
Extra
Y-Aaxis
4-Slideway Design
57.28"
X 24m/min. 9,45ipm
,455 mm
Base 1 Y 24m/min. 9,45ipm
Ma chine
Wide Z 24m/min. 9,45ipm
Extra
8
/ DIMENSIONS
HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER
R6
R2 73.
6. 5
52 T-SLOTS
14 H8
865 34.06
700 27.56
0.55
2,740 107.87
700 27.56
27.5 1.08
R5
40 R2 0
4
R5 1.26 1.2
R2
2 0.08
6
1,200 47.24
0.35
9
30°
202
14 0.55
0.02
0.5
23 0.91
2,155 84.84
BT
DIN
1,995 78.54
1,940 76.38
260 10.24
800 31.50
1,595 62.80
1,600 62.99
2,730 107.48
FV56T : 1,620 63.78
FV56A : 1,850 72.83
1,350 53.15
520 20.47
60 100 100 100 100 60 TABLE SIZE
675 26.57
2.36 3.94 3.94 3.94 3.94 2.36
FV85A : 1,000 39.37 / FV102A : 1,120 44.09
T-SLOTS
18 H8
3,455 136.02
0.71
2,654 104.49
1,215 47.83
1.22
31
0.51
13
32
0.02
0.5
1.26
2,380 93.70
2,435 95.87
2,235 87.99
2,015 79.33
2,030 79.92
520 20.47
520 20.47
100 100 100 100 60
3.94100
60 100 100 3.94 100
3.94 3.94 2.36
TABLE SIZE
12.99
R3 900
43
5.
R
T-SLOTS
1350 53.15
1350 53.15
H8
18
2,125 83.66
3,135 123.43
0.71
2,820 111.02
31 1.22
13 0.51
0.5 0.02
32 1.26
3,100 122.05
695 290
540 21.26
2,385 93.90
2,370 93.31
27.36 11.42
2,460 96.85
2,240 88.19
2,060 81.10
1,880 74.02
1,030 40.55
925 36.42
11 Unit : mm inch
/
DIMENSIONS
HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER
DIMENSIONS
R6
R2 75
118° 6.5
7
240 9.45
160 6.30 160 6.30
865 34.06
ø13.5
560 22.05
3.15 3.15
ø0.53
80 80
65.34 mm
3,295 129.72
22.5 0.89
240 9.45
59 mm
0.5 0.02
40 R5
R5 .26 R2 40
1 1.2
R2 6 1,100 43.31
80 80
3.15 3.15
160 6.30 160 6.30 M12x1.75P
460 18.11
410 16.14
3.50 mm
2,210 87.01
2,185 86.02
2,155 84.84
2,045 80.51
1,930 75.98
1,175 46.26
260 10.24
800 31.50
3,095 121.85
Unit : mm inch 12
/
/ DIMENSIONS
HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER
Model FV102A
Pallet Size 1,000 x 480mm 39.37" x 18.9"
Table Load Capacity 400kg 882 lb
Distance Between Spindle 30~570mm
Nose and Table Top 1.18"~22.44"
Axial Rapid Feedrate
24/24/24 m/min. 945/945/945ipm
(X/Y/Z)
Machine Weight 6,360kg 14,021 lb
120°
40 1.57 100x4 ø20
M16x2P
50 1.97
35
45
675
500 19.69
26.57
4,090 161.02
18
1,350 53.15
1,000 39.37
0°
°
60 2C2C
6
100x9
°
°
60
60
240 9.45
ø110
18
2C
2C
ø50
0.12
3
3,475 136.81
2,015 79.33
2,030 79.92
R400
R15.75
870 635
34.25 25
995 39.17
53.74
1,365
Multi-function Display
Easily select multiple windows from the following list of display for your
monitoring needs. HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER
G-code Status Feedrate Parts Count Controller Running Hours
M-code Status Tool Data Machining Hours Spindle Load
Spindle Status Work Coordination Date and Time Function Display
+25%
Artificially intelligent machining function that is
developed from accumulation of all YCM knowledge
and experience on high speed to achieve the fastest
cycle time with best machining results.
Machining efficiency improved by 25% without
Efficiency increased by
sacrificing machining accuracy.
YCM
M
YC IECE
P
RK S:
WO ATU TE
ST PLE
WORKPIECE
M
CO
STATUS:
COMPLETE
System Chart
SPINDLE
Spindle Speed (opt.) 45~15,000rpm 45~10,000rpm (12,000/15,000rpm)
5.5/7.5/11kW (7.5/11/15kW)
Spindle Power (opt.) 2.2/3.7kW 3/5HP 5.5/7.5/11kW 7/10/11HP 7.5/11/15kW 10/15/20HP
7/10/15HP (10/15/20HP)
Spindle Taper BT30 BBT40
Front Bearing Diameter ø45mm ø1.77" ø70mm ø2.76"
TRAVEL
X-axis Travel 560mm 22.05" 850mm 33.46" 1,020mm 40.16" 1,270mm 50"
Y-axis Travel 410mm 16.14" 520mm 20.47"
Z-axis Travel 450mm 17.72" 540mm 21.26"
Distance Between Spindle Nose &
110~560mm 4.33"~22.05" 170~710mm 6.69"~27.95" 105~645mm 4.13"~25.39"
Table Top
TABLE
1,000 x 520mm 1,120 x 520mm 1,350 x 520mm
Table size 700 x 420mm 27.56"~16.54"
39.37" x 20.47" 44.09" x 20.47" 53.15" x 20.47"
T-Slots × Size × Pitch 3 x 14mm x 100mm 3 x 0.55" x 3.94" 5 x 18mm x 100mm 5 x 0.71" x 3.94"
Max. Load on Table 300kg 661 lb 500kg 1,102 lb 1,000kg 2,205 lb
FEEDRATE
36/36/24 m/min. (48/48/48 m/min.) 24/24/24 m/min.
Rapid Feedrate 36/36/24 m/min. 1,417/1,417/945ipm
1,417/1,417/945ipm (1,890/1,890/1,890ipm) 945/945/945ipm
Cutting Feedrate 1~10,000mm/min. (0.04~394ipm)
ATC
Tool Magazine Capacity 16T (20T) 20T 24T (20T)
Max. Tool Weight (per piece) 4kg 8.8 lb 6kg 13.2 lb
Pull Stud MAS-P30T-1 MAS-P40T-1
ø63 x 200mm ø90mm x 250mm ø80mm x 300mm (ø95mm x 300mm)
Max. Tool Dimensions
ø2.48" x 7.87" ø3.54" x 9.84" ø3.15" x 11.81" (ø3.74" x 11.81")
Max.Tool Dimensions
ø100mm ø3.94" ø125mm ø4.92"
(Without adjacent tools)
Tool Changer Method Arm Type Arm Type (Armless Type)
Tool Selection Method Random Random (By Sequence)
GENERAL
Pneumatic Supplier 5.5kg/cm2 78.2psl
Power Consumption 12kVA (17kVA) 19kVA (25kVA) 22kVA (25kVA) 25kVA (25kVA)
Machine Weight 2,800kg 6,173 lb 3,000kg 6,614 lb 5,260kg 11,596 lb 5,350kg 11,795 lb 6,700kg 14,771 lb
Note: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice.
All the specifications shown above are just for reference.
ø0.67”
ø17
23 0.91” 4 3 0.12”
M16 x 2P
3 28 1.10”
M12 x 1.75P 5 0.2” 0.16” 0.13”
M16 x 2P
ø0.90”
ø23
3.5 0.14”
ø10 ø0.39”
ø0.49”
ø75.7 ø2.98”
ø31.8 ø1.25”
ø44.45 ø1.75”
ø46 ø1.81”
ø53 ø2.09”
ø63 ø2.48”
ø16.5 ø0.65”
ø38 ø1.5”
16 0.63”
ø11 ø0.43”
ø12.5 ø0.49”
30°
ø0.59”
ø0.28”
ø15
ø7
M12 x 1.75P
ø9.5 ø0.37”
ACCESSORIES
14001
認可登錄
5M1E003-00
102010-E06-2000