Professional Documents
Culture Documents
How To Make Tiles
How To Make Tiles
Requirements:
● Enough 12“x12“ scrapbook cardboard tiles, or any other cardboard of 2mm thickness that is larger than
310x310mm are suitable. Both can be easily obtained from art supply or hobby stores, and should be
nearly identical to the original, and other, commonly used cardboard gaming tiles and boards. You
usually need around 10 for the whole set, but it can vary, depending on the number of files.
Printing:
● Upscaled board size:
(Compatible with the plastic Necromunda terrain, and plastic tiles made by GW)
Paper format A3+ (329x483mm) or larger is required. The tile size is 12”x12” (305mm x 305mm).
Set the dimensions to 317x317mm, and print the files in original size -> 100% scale.
● If you are printing from home, you need to get a software that allows for precise printing settings, such
as ACDsee, or different photo studio, or graphical editor software. Basic Windows image viewer is not
capable of such things.
● Use of smooth white sticky paper, sticky washable etiquette paper, or sticky PVC foil is recommended
for its durability over regular office paper, which will get scratched quickly..
● If you plan on using the service of a printing company, ask around what they offer and recommend, and
how much it will cost. Some companies offer creating the tiles as a whole, giving you a finished product,
but for higher price.
1. Print the images in the desired size on the correct paper format and type.
Ask a professional, or do a couple of test prints if you are not sure.
Images have approx 6mm bleed on every side for the ease of cutting and printing.
2. Precisely cut out the printed-out tile by following the guidelines on the paper, using a sharp scalpel or
hobby knife. Usage of a sufficiently long metal ruler is recommended to ensure precise and straight cut.
3. Repeat this step with the other paper you wish to use as the other side of the tile. Look at the table
included in the folder to see which tiles should be used together. Or do as you like.
4. Precisely cut the cardboard to your desired dimensions, if needed, using a sharp scalpel, or a hobby
knife. Usage of a sufficiently long metal ruler is recommended to ensure precise and straight cut.
Multiple cuts may be necessary due to the thickness of the cardboard.
7. If there are any inaccuracies, trim the cardboard around the printed image with a hobby knife. Keep in
mind the sizes you are going for. The size of the cardboard should be either 11⅜” x 11⅜” or 12”x12”
(289x289mm or 305x305mm) respectively, and the edges should be as smooth and straight as possible
8. In case there is a small gap between the edge of the cardboard and the edge of the paper, black it out
with a permanent marker. Compare your tiles with the tiles made by GW, and try to make them as
similar as possible.
1. Apply a matte protective foil, or paper-friendly varnish over the paper to increase durability and
resistance to damage of the tiles. Mind which varnish you use, some might react with the chemical
composition of the ink or paper and damage the prints.
2. Correct any bends and sticking-out pieces of paper. The tile should be straight, without any bends, and
properly trimmed to ensure compatibility with other tiles. Improvise if you have to.
Printing info:
Paper and printer settings might influence the overall brightness of the tile. It is recommended to make a
test-print, and check if the colors are alright. If not, you can use any graphical software (Photoshop, GIMP, etc…)
to adjust the colors, or any graphical changes.
Those test prints can then be used to train making the cardboard tiles. If you mess up, you lose nothing!
Extras:
You can place strips of thick black paper accordingly over the wall areas, that will serve as a guide and an anchor
for the plastic terrain pieces, so your battlefield won’t shift and slide around each time you manage to bump into
it.
Info:
Using your own printing experience is recommended. While I successfully printed some of the
pictures, I’m no printing expert.
Creating and using the tiles is at your own risk, and I’m not responsible for any injury, damage, or expenses. Note
that use of sharp knives and precision work is required, so the work should be done by adults, or juveniles under
the supervision of adults only.
No challenge to the copyright claims were intended, and all rights belong to their respective owners.
For non-commercial use only.