Professional Documents
Culture Documents
GYGYU系列泵样本
GYGYU系列泵样本
GYGYU系列泵样本
Introduction
Series GY&GYU pump is a vertical, in-line design, fully compliant with API 610, GY is OH5
and GYU is OH3. This pump offers a space-saving alternative for many overhung process
pumps in upstream and downstream services, including cryogenic, high temperature, and
high working pressure services.
Operating Parameters
Capacity (Q): ~3000 m3/h
Head (H): ~200 m
Work pressure (P): ≤1.6 MPa
Work temperature (T): -35 ~ +105 ℃
Pump Designation
125 GY 200 × 60
125 — Discharge Diameter (mm)
GY — Series N.O.
河北木源泵业有限责任公司
HEBEI MUYUAN PUMP INDUSTRY CO., LTD.
200 — Rated Capacity (m3/h)
60 — Rated Head (m)
400 GYU 1500 × 100
400 — Discharge Diameter (mm)
GYU — Series N.O.
1500 — Rated Capacity (m3/h)
100 — Rated Head (m)
Pump Structures
Casing
The pump casing is designed with a vertical in-line, single-stage, end inlet and end outlet.
The suction and discharge flange is perpendicular to shaft. The various flange standards
such as AISI、ISO、DIN are available to meet different pipe load and customer requirements.
The rated pressure level of the suction and discharge flanges is the same, and their nominal
diameters are the same.
Impeller
The impeller is a single suction, radial flow, closed design. The impeller is dynamically
balanced, keyed to the shaft and secured by lock-nut and lock screw. Renewable wear rings
are press fit onto the impeller hubs (front and back) and positively secured with axial screws
or tack welding.
Pump Bearings and Lubrication
Series GYU adopts angular contact ball bearings, which can sustain heavy loads, including
pump load, rotor weight and instantaneous load, when pump starts. Bearing is installed in an
integrated bearing housing and lubricated by grease. The motor weight of Series GY is
wholly supported by pump. The motor is designed to sustain pump axial force as well as the
instantaneous axial force when pump starts.
Shaft and Shaft Seal
ISO 21049/API 682 seal chamber accommodates a wide variety of seal configurations
including dual pressurized and unpressurized cartridge types for the most severe services. A
full complement of API 610 seal flush plans is available.
河北木源泵业有限责任公司
HEBEI MUYUAN PUMP INDUSTRY CO., LTD.
Rotating Direction
The direction of rotation of the pump is CW when viewed from the driven end.
Applications
Heat Transfer Fluids, Gas to Liquids, Acid Transfer, Hydrocracking, Boiler Feed Booster,
Hydrotreating, Catalytic Cracking, Industrial Gases, Caustic and Chlor-alkali, LNG, Chemical
and Liquor (pulp and paper), Leaching Acid, Cooling Water (power), Crude, Product and
CO2 Pipeline, Plating, Galvanizing and Other Coatings, Desalination, Residuum and Heavy
Oil Upgrading, Solvents, Distillation (oil and gas), Volatile Organic Compounds, Drilling and
Production, Water Supply and Treatment (oil and gas), FPSO, Water and CO2 Injection, Gas
Treating and Sulfur Recovery, Heavy Oil, Oil Sands and Shale.
Industries
● Crude Handling and Treatment
● Catalytic Cracking
● Utilities
● LNG
● Water Handling and Treatment
● Gas Treatment
● Gas-to-Liquids
● Water Resources
● Power Generation
● Mining
● Oil and Gas
● Chemical and Liquor
● Chemical Processing
河北木源泵业有限责任公司
HEBEI MUYUAN PUMP INDUSTRY CO., LTD.
Cross Section Drawing for GY