Professional Documents
Culture Documents
IA PlumbingNC1 9 Q4 LAS4 FINAL
IA PlumbingNC1 9 Q4 LAS4 FINAL
TLE – IA (Plumbing NC I)
Activity Sheet
Quarter 4 – C 3.1 & 3.5
Proper Use of Plumbing Hand Tools
Republic Act 8293, section 176 states that: No copyright shall subsist in any work
of the Government of the Philippines. However, prior approval of the government agency or
office wherein the work is created shall be necessary for exploitation of such work for profit.
Such agency or office may, among other things, impose as a condition the payment of
royalties.
The TLE 9- IA (Plumbing NC I) Activity Sheet will help you facilitate the
teaching-learning activities specified in each Most Essential Learning Competency
(MELC) with minimal or no face-to-face encounter between you and the learner. This
will be made available to the learners with the references/links to ease the
independent learning.
Hand Tools
1. Nipple extractor
1
Every plumber needs this in his toolbox. It is a portable self-igniting gas welding torch
you can use for carrying out heat soldering tasks, heat treating, brazing large diameter
copper pipes, thawing pipes, removing tile and paint, and even melting gold/silver and other
metals.
Apart from plumbing, you will find it useful for air condition installation and repair,
automobile repair and bodyworks and other DIY home improvement projects and crafts at
home.
3. Adjustable wrench
Plumbers make use of different types of pipes, which means you will need a way to
cut these pipes. Pipe and tube cutters allow you to do this easily.
It is designed with a ratchet hand to allow you cut with it even in tight and confined
spaces.
5. Cartridge puller
Leaky faucets are one of the common problems every homeowner faces. If you want
to repair the leak by yourself, then you need to install a new cartridge. This cartridge puller
helps you remove or pull out old or damaged cartridges so that you can install a new one to
close the leak and save water.
2
6. Pipe crimping tool
Crimping metal pipes allows you to slip one end of the pipe or tube into another end,
making them fit tight and snug. A pipe crimping tool is a must have if you really want to call
yourself a plumber, or if you want to take care of the plumbing projects in your home.
This steel constructed push-to-connect fittings removal tool does what the name says
it does. It is a very good tool for easy removal of push-to-connect fittings.
This simple faucet and sink wrench might not look like much, but I believe it is a
must-have tool that will really make your job as a plumber easier.
Especially when installing faucets and sinks. It allows you to fasten and remove hard-
to-reach mounting nuts on sinks, faucets, sprayers, and ball cocks, and makes everything
easy due to its miniature size.
3
9. Straight pipe wrench set
Talking about plumbing tools, I am not sure you can call yourself a plumber without
this one in your toolbox. A straight pipe wrench is suitable for any kind of pipe work and it is
a must-have tool every plumber should have.
Having a set of different sizes is recommended so you can choose the wrench
according to the size and type of pipe you are working with.
A wrench is one of the most common plumbing tools you’ll find with any plumber. As
a plumber, you’re going to have to get different type of wrenches for your projects. One of
them is this offset hex wrench.
It provides multi-sided and secure grip on all hex nuts, unions, valve packing nuts,
square nuts, and pipes.
4
This internal pvc pipe cutter works with any electric drill to help you cut pipes that can
not be cut with any other means due to their inaccessible location.
When other normal pipe cutting tools do not work, this is the tool you turn to. It is
used for cutting internal pvc, CPVC, ABS and other types of pipes.
You might not need it all the time, but when you finally do, no other tool can replace
it. So, it is important you have one of these, neatly kept in your toolbox.
It is ideal for clearing all types of drains including kitchen sinks, bathroom, show,
downspouts, and bathtubs.
III. Accompanying DepEd Textbook and Educational Sites (With Possible Materials for
5
experiments/activities)
Activity 1
Directions: Identify the following plumbing hand tools that are being describe. Write your
answer in separate sheet of pad paper.
1. It provides multi-sided and secure grip on all hex nuts, unions, valve packing nuts,
square nuts, and pipes.
2. Very useful tool for plumbers, applicable for under-sink repairs and installations. The
handle telescopes so you can adjust the length to suit your application.
3. Helps you remove or pull out old or damaged cartridges so that you can install a new
one to close the leak and save water.
4. It features a super-thin head design that allows you to use it in limited and narrow spaces
conveniently. It’s ideal for plumbing, air condition installation and repair, and automotive
projects.
5. you have a very useful tool for extracting or removing broken pipe nipples and fittings
from galvanized or gas piping.
6. This cutter by Ridgid is designed to cut both hard and soft copper, aluminum, and brass
pipes and tubings. It was designed with a ratchet hand to allow you cut with it even in
tight and confined spaces.
7. You can adjust the size of the V-jaws which allow you to grip and clamp different sizes of
nuts, bolts, pipes, fasteners, and fittings without slipping.
8. you do not have to wait hours and even days for a plumber to clear your drain. It is ideal
for clearing all types of drains including kitchen sinks, bathroom, show, downspouts, and
bathtubs.
9. works with any electric drill to help you cut pipes that can not be cut with any other
means due to their inaccessible location.
10. It allows you to fasten and remove hard-to-reach mounting nuts on sinks, faucets,
sprayers, and ball cocks, and makes everything easy due to its miniature size.
6
Activity 2
Directions: Identify the following plumbing hand tools. Write your answer in separate sheet of
pad paper. Use this site as a reference: https://craftsmanprotools.com/plumbing-tools/
Source: Bright Ochuko, 22 Plumbing Tools You Should Have As a Beginner Plumber,
Craftsman Pro Tools, December 11, 2020. https://craftsmanprotools.com/plumbing-tools/.
V. Reflection
1. Why are the hand tools in plumbing are so important? How do we know the proper
used of its hand tools?
_____________________________________________________________________
_____________________________________________________________________.
Activity 1
Activity 2