The document outlines the required specifications for a multi-GNSS receiver system including the receiver, antenna, controller, accuracy standards, data recording capabilities, display interface, ports, batteries, environmental protections, compatibility accessories, data processing software, and warranty requirements. Key aspects are the ability to track GPS, GLONASS, Galileo, and BeiDou signals simultaneously on up to 450 channels, with positioning accuracy of 3mm horizontally and 5mm vertically for static use and 10mm and 15mm for RTK use. The system must also be able to continuously operate for 6 hours on internal batteries.
The document outlines the required specifications for a multi-GNSS receiver system including the receiver, antenna, controller, accuracy standards, data recording capabilities, display interface, ports, batteries, environmental protections, compatibility accessories, data processing software, and warranty requirements. Key aspects are the ability to track GPS, GLONASS, Galileo, and BeiDou signals simultaneously on up to 450 channels, with positioning accuracy of 3mm horizontally and 5mm vertically for static use and 10mm and 15mm for RTK use. The system must also be able to continuously operate for 6 hours on internal batteries.
The document outlines the required specifications for a multi-GNSS receiver system including the receiver, antenna, controller, accuracy standards, data recording capabilities, display interface, ports, batteries, environmental protections, compatibility accessories, data processing software, and warranty requirements. Key aspects are the ability to track GPS, GLONASS, Galileo, and BeiDou signals simultaneously on up to 450 channels, with positioning accuracy of 3mm horizontally and 5mm vertically for static use and 10mm and 15mm for RTK use. The system must also be able to continuously operate for 6 hours on internal batteries.
● Multi-frequency and multi constellation GNSS receiver.
● Receiver should be capable of receiving following signals and should be capable to track a minimum of 450 Channels simultaneously: GPS (L1, L2, L5) GLONASS (L1, L2) Receiver Type GALILEO (E1, E5a, E5b) BeiDOU (B1,B2) ● Should have fully-independent GNSS tracking ● Should be able to track all satellites within visible horizon
● Antenna weight should be less than 2 kg
● Antenna calibration model data should be available. ● Should have Multi-path mitigation mechanism ● Antenna should be capable of receiving following signals . Antenna Type GPS (L1, L2, L5) GLONASS (L1, L2) GALILEO (E1, E5a, E5b) BeiDOU (B1,B2)
Full operation control of receiver function.
Should operate on internal battery and with external power supply. Should continuously work for minimum 6 hours without charging Controller 5.5 inch sunlight readable screen 1080P HD display. 5.0 Dual-mode Bluetooth, ultra long range Bluetooth connection. 9000mAh Li-Polymer Battery for continuously working 24 hour or better.
Positioning ● 3 mm ± 0.5ppm horizontal or better
Accuracy for Static ● 5mm ± 0.5ppm vertical or better ● 10mm ± 1ppm horizontal or better Positioning ● 15 mm ± 1 ppm vertical or better Accuracy for RTK
● Support up to 60° IMU tilt compensation
IMU tilt
Internal Radio RTK ● 10 km or Better
Range ● Receiver should be able to store data on internal and external storage media Data (collectively 8 GB or more). Recording/Logging ● The receiver should be able to record data at multiple measurement intervals, multiple concurrent logging sessions including data logging frequency of 10 Hz or better ● Should display Battery, Satellite tracking, Memory Usage, DOPs and capable of Display and User displaying other configurations from receiver independently on a display panel Interface ● Should have user Interface, accessible, for configuration, operation, status and data transfer. ● All necessary data and communication port including Antenna Port , External power Data Port and supply support, COM Data Port Communication ● Bluetooth/Wi-Fi and cable connection to controller ● The receiver should support USB connections via USB port ● The receiver should have removable internal batteries with overvoltage protection Battery and total supply at least 6Ah ● The batteries should be able to be charged with external/internal charger ● Provision to work with external power supply in the range of 9 to 24volts DC. ● Automatic switching facility between internal and external power source. Power Requirement ● Polarity protection DC. ● Rechargeable batteries with capacity to operate continuously for at least 15 hours under minimum configuration Environmental ● Operating Temperature: -200C to + 600C or better ● Storage Temperature: -400C to + 650C or better Protection ● Waterproof and Dust-tight (IP 67 or better), shockproof, Humidity: 100% non- condensing and condensation proof ● All necessary power cables for connections and operations ● Internal batteries, battery charger, power cable. Compatibility and ● Extra cables and connectors for power from external battery Accessories ● One wooden tripod of same brand and necessary mounting kit (tri-brach) with optical/ laser plummet ● All essential connectors and cables ● The software should be able to download and process raw data. ● The software should be able to perform all necessary functions of transferring data to card/external data logger/computer, RINEXing raw data GNSS Data logging and storing data in proprietary format. processing and ● The software should be capable of handling and configuring GNSS data for Analyzing Software GPS, GLONASS, GALILEO, BeiDOU together and individually. ● The software should support automatic RINEX conversion based upon the user defined sampling interval and file length. ● Able to import precise ephemeris, IGS base station data as well as tropospheric and ionospheric models via internet during post processing.
● Minimum of two years’ replacement warranty in parts and labour service.
(The vendor should provide official warranty certificate of 2 years issued by Warranty manufacturer at the time of delivery.) ● 1 year Replacement warranty for any Hardware Problem. ● Free Update Software required in at list 5 year
…………………………... Mr. Abhisek Bhatta, Geomatics Engineer Council No.: 529, NEC