Professional Documents
Culture Documents
Electrical Operated Hand Tools
Electrical Operated Hand Tools
Hand-Tools
Electric Drill
Electric Drill
• For drilling purposes
• Drill equipped with chuck is for smaller sized drill
• Larger sized drill are equipped with tapered shank
Safety
• Use safety goggles, hand gloves and dust mask
• Ensure validity of electrical inspection, a valid sticker if applicable.
• Ensure the electricity is turned off when installing/removing drill bit
• Ensure the components to be drilled are properly secured
Inspection required
• Check electric cable before switching on drill, report any broken insulation of the cable
Electric Grinder
Electric Grinder
• For grinding purposes
• Can be used for cutting purpose if the cutting disc is installed
Safety
• Use safety goggles, ear plug, hand gloves and dust mask
• Ensure validity of electrical inspection, a valid sticker if applicable.
• Ensure the electricity is turned off when replacing grinding wheel
• Ensure the components to be grinded are properly secured
Inspection required
• Check electric cable before switching on, report any broken insulation of the cable
Electric Bench Cutter
Safety
• Use safety goggles, ear plug, hand gloves and dust mask
• Ensure validity of electrical inspection, a valid sticker if applicable.
• Ensure the electricity is turned off when replacing cutting wheel
• Ensure the components to be cut are properly secured
Inspection required
• Check electric cable before switching on, report any broken insulation of the cable
Electric Chipping Hammer
Safety
• Use face shield, ear plug, hand gloves and dust mask, in certain area apron to be used
• Ensure validity of electrical inspection, a valid sticker if applicable.
• Ensure the electricity is turned off when replacing chipping chisel
Inspection required
• Check electric cable before switching on, report any broken insulation of the cable
Electric Impact Wrench
Safety
• Use safety goggles, ear plug and hand gloves
•Ensure the electricity is turned off when installing/removing socket
• Use the correct size of socket.
• Ensure to hold the impact wrench tight to avoid swing during the start of the impact wrench
Inspection required
• Check electric cable before switching on, report any broken insulation of the cable
Pencil Grinder
Pencil Grinder
• Used for grinding and polishing
• Used for removing high spots and rounding off sharp edges
Safety
• Use face shield, ear plug, hand gloves and dust mask, in certain area apron to be used
• Ensure validity of electrical inspection, a valid sticker if applicable.
• Ensure the electricity is turned off when installing/removing the grinding bit
Inspection required
• Check electric cable before switching on, report any broken insulation of the cable
Rotary Sand Paper
Safety
• Use face shield, ear plug, hand gloves and dust mask, in certain area apron to be used
• Ensure validity of electrical inspection, a valid sticker if applicable.
• Ensure the electricity is turned off when installing/removing the sand paper
Inspection required
• Check electric cable before switching on, report any broken insulation of the cable
Electrical Honing Tool
Safety
• Use face shield, ear plug, hand gloves and dust mask, in certain area apron to be used
• Ensure validity of electrical inspection, a valid sticker if applicable.
• Ensure the electricity is turned off when installing/removing the sand paper
Inspection required
• Check electric cable before switching on, report any broken insulation of the cable