Professional Documents
Culture Documents
Pfaff 76/77 Sewing Machine Instruction Manual
Pfaff 76/77 Sewing Machine Instruction Manual
Pfaff 76/77 Sewing Machine Instruction Manual
com
m
.co
es Instruction Book
uid
-g
CPFAFFD® 76 CPFAFP) 77
all
All manuals and user guides at all-guides.com
Cotton or mercerized
fabrics and poplin shirting cotton so
Suitings and mantlings Silk 40 80 — 90
130 suk
Synthetic thread 70—80
Acella, teatherette, oilcloth Cotton 40 80—90 PCL
Elastic corsetry fabrics, firm Synthetic thread 40 70 — 90
130 ses
corsetry fabrics, corset satin Cotton - 40 90
Leather Cotton 110 130 Lr
Linen 40
Embroidery thread 30 — 50 70
Heavyembrokierythread — 90—100
Buttonhole silk — 90 100
—
Silver-gold thread
Silver thread
70 80 — ioo
All manuals and user guides at all-guides.com
Instructions
CPFAFFI 76and77
Foreword
Your new Pfaff sewing machine will enable
you to master a large variety of sewing,
embroidering and darning jobs easily and
quickly.
This instruction book has been compiled in
order to familiarize you thoroughly with all
the sewing jobs coming up in a home.
We suggest that you try out the various sew
ing techniques discussed in this book so that
you will become well acquainted with your
machine.
If you have any sewing problems, please do
not hesitate to contact your Pfaff dealer who
will be glad to help you at any time.
We hope you will always enjoy sewing with
your Pfaff.
1 Face cover
LHL1fl
2 Take-up lever
3 Thread guide
4 Top cover
5 Thread retainer stud
6 Spool pins
17 7 Bobbin winder
8 Balance wheel
9 Stop motion knob
9 10 Motor disengaging mechanism
11 Stitch length control
12 Reverse feed control
18 13 Bed cover
14 Transverse rotary hook
10 15 Needle plate
16 Sewing foot thumb screw
16 17 Light switch
18 Stitch width control
15 19 Needle position lever
20 Needle thread tension
21 Presser bar lifter
(on back of machine arm)
22 Needle set screw
23 Sewing foot
2
All manuals and user guides at all-guides.com
1 Face cover
2 Take-up lever
3 4 5 I—6_ 3 Thread guide
U 5
6
7
4 Top cover
Thread retainer stud
Spool pins
Bobbin winder
1 7— 8 Balance wheel
9 Stop motion knob
10 Motor disengaging mechanism
11 Stitch length control
12 Reverse feed control
13 Free arm
14 Free arm cover
(enclosing transverse rotary hook)
15 Needle plate
16 16
17
Sewing foot thumb screw
Light switch
15 18 Stitch width control
19 Needle position lever
14 20 Needle thread tension
21 Presser bar lifter
(on back of machine arm)
22 Needle set screw
23 Sewing foot
3
All manuals and user guides at all-guides.com
m
Preparing Your Machine for Sewing
.co
es
Push plug A into the receptacle on the back
of the machine and the plug at the other end Place the foot control within easy reach of
To switch on the sewlight, push the button
of the cord into the wall outlet. your foot and depress the pedal. The harder
on the face cover (see ill.). you press, the faster the machine will run.
uid
-g
4
all
All manuals and user guides at all-guides.com
5
All manuals and user guides at all-guides.com
k-
I I
All manuals and user guides at all-guides.com
For bobbin winding, disengage the sewing Pass the thread around thread retainer stud
mechanism. Hold balance wheel (8) while (2) in the direction indicated by the arrow.
turning stop motion knob (9) toward you Place a bobbin on the bobbin winder
(see ill.). spindle, making sure that key A at its base
enters slot B in the bobbin (see ill.).
To engage the sewing mechanism after the
bobbin has been wound, turn the stop mo Wind a few turns of thread on tho bobbin
tion knob away from you (as indicated by and push the bobbin toward the right
the arrow in the ill,). Start the machine.
When the bobbin is full, it is pushed toward
the left and can be removed from the
spindle.
if
1. 7
All manuals and user guides at all-guides.com
8
All manuals and user guides at all-guides.com
m
.co
es
Pfaff 76
uid
Pfaff 77
,
rotate the balance wheel until the
needle
is at its highest point. Lift the latch
and
place the bobbin case on center stud
s (see
ill.), making sure its slot (white arrow)
points
up. Release the latch and press against
the
bobbin case until you hear it snap
into
place.
all
9
All manuals and user guides at all-guides.com
2 4
To enlarge the sewing area of the Pfaff 77
for ordinary sewing operations, push the The sewing area of the Pfaff 76 Portable is
workplate onto the free arm as far as it will enlarged with the aid of an extensIon (4).
go (1). Then lock it in place by turning down
the lever on the back of the machine (2) un
til the locking stud snaps into the hole in
the free arm. Press the workplate support
against the machine base until it snaps into
1
place (3).
To remove the workplate, swing up its sup
port and unlock it by pulling out and swing
ing up the lever on the back of the machine
J
(see arrow in Fig. 2).
20
11
All manuals and user guides at all-guides.com
13
All manuals and user guides at all-guides.com
m
Begin by sewing a straight-stitch seam. To
this end, push stitch width control (18) to
.co
the right as far as it will go.
es
L
The stitch length is regulated by turning
stitch length control (11). The number indi
cating the stitch length chosen should be I
uid
14
all
All manuals and user guides at all-guides.com
15
All manuals and user guides at all-guides.com
bottom top
17
All manuals and user guides at all-guides.com
Darning
pro
To prepare your machine for darning,
F
ceed as follows:
18
All manuals and user guides at all-guides.com
m
.co
es
uid
19
All manuals and user guides at all-guides.com
Zipper Insertion
Baste closed zipper on the fabric, then open
Attach zipper foot without quilting gauge. it. Stitch close to the left edge of the zipper
Stitch length: 1.5 to 2. for about 1 inch, guiding the right edge of
the foot along the zipper teeth (1). Leave
Central needle position.
the needle in the material, raise the zipper
foot and close the zipper (2).
84
Continue stitching until you reach the end
of the zipper. Then stitch across this end (3)
and up to the other side.
The finished zipper closure is shown in
Fig. 4.
20
All manuals and user guides at all-guides.com
847 561
Quilting
with
Use zipper foot No. 93-847 600-00
seams
quilting gauge for sewing parallel
over the entire surface of the fabric .
21
All manuals and user guides at all-guides.com
Hemming
Stitch leng
th: 1.5 to Fold the be
2
making a heginning of the fabric
847 551 inches long m about 1 /s inch wid edge twice,
e and seve
hemmer foot. Place the materia ral
an d lower th l under
4 straight
stitches to e same. Mak the
in place. secure the e 3 to
folded edge
Draw the
fabric into
both thread the hemmer
s backwar
drawing. ds, as sh by pulling
own in th
e
Feed the fa
scroll with bric edge into the
your right hemmer foot
sure that th hand (see
ill.), makin
at all times e scroll is well fille g
d
ways under and the fabric does no with fabric
the right ha t slip side
To produc lf of the foot.
e
use zigzag an elastic hem on
so
instructed stitches. Set the stitc ft fabrics,
on p. 25. h width, as
22
All manuals and user guides at all-guides.com
Cording
23
All manuals and user guides at all-guides.com
m
Hemstitching
Stitch length: 2 to 2.5
.co
-lOOI79
IV”
I.
es
Use a thread which is not too heavy and
matches the material being hemstitched
(preferably a No. 50 embroidery thread).
uid
18
The stitch length is regulated by turning
stitch length control (11) (see ill.). The larger
the number, the longer the stitch.
25
All manuals and user guides at all-guides.com
u 838 954
26
All manuals and user guides at all-guides.com
Inserting Patches
Stitch width: medium.
838 954
27
All manuals and user guides at all-guides.com
Inserting Lace
Stitch length: 1
u 838 954
m
Changing the Needle Position
.co
Some special sewing jobs are
the needle switched to the right made with
the needle plate slot. This is or left of
done by moving
lever (19) to the right and left,
respectively.
The needle position lever
is indispensable
for sewing buttonholes.
es
Lever at left center right
3r
uid
4-
() C’D C)
-g
29
all
All manuals and user guides at all-guides.com
Sewing Buttonholes
I
1 2
Attach buttonhole foot No. 847616 to the
machine and set the slide on the buttonhole
gauge to the buttonhole length desired.
The number indicating the buttonhole length
should be in line with the right edge of the
slide. The buttonhole is the right length when
the beginning of the first seam reaches the
red end of the slide indicator (see arrow).
Flick the needle to its left position and put
the stitch width control in notch R 1 (see ill).
When using No. 50 embroidery thread, set
the stitch length control so that both dots
are opposite each other (see ill.). For heavier
threads, slightly increase the stitch length.
To obtain more prominent buttonholes,
place a filler cord of medium size in the
left groove of the sewing foot.
All-purpose sewing foot No. 91-100 179-00
may also be used for this operation. 3
30
All manuals and user guides at all-guides.com
Sew the first seam over the filler cord. Push stitch width control (18) to the second
When the buttonhole is the right length, notch R 2 and sew the second tack, slightly
leave the needle in the fabric on the right holding the material to reduce the length of
of its throw. Lift the sewing foot, turn the bar. Flick the stitch width control all the way
fabric around clockwise by half a turn, place to the right and make 3 to 4 fastening stit
the filler cord aroL.!nd the needle and pull ches.
it forward, placing it in the left groove of Open the buttonhole with your seam ripper
the foo. Lower the foot and take one stitch which is included in the accessory box.
by hand.
Move stitch width control (18) to the second
notch, R 2, make 4 or 6 bartack stitches,
slightly holding the material to reduce the
length of bar.
Push stitch width control (18) back to the
first notch R 1 and sew the second button
hole seam, stopping about /io inch from the
end of the first seam.
Slightly pull the filler cord and trim it close
to the bar (5).
31
All manuals and user guides at all-guides.com
Monogram Embroidery -
93100179
32
All manuals and user guides at all-guides.com
°°
1=71
Baste the hem or pin it about /16 inch from
the fabric edge, as illustrated (1).
Then flick the needle to its right position and
set the stitch length control at “4”. Reduce
the needle thread tension by one grade.
Fold the hem (2) and place the fabric under
Bindstitching
the sewing foot so that the folded edge is
Apply clear-view sewing foot in line with the left groove of the foot (see
No, 91-100 179-00. ill.). Regulate the stitch width so that the
needle takes the left stitch exactly in the Fold
folded edge, catching merely one fabric
yarn (see ill.).
Please note:
Fold the hem of heavy woolens only
once
(3) and finish the raw edge with zigzag
stitches before it is hemmed.
3
33
All manuals and user guides at all-guides.com
m
Ornamental Sewing
.co
You can make exc
iting fashion-stitc
by varying stitch
needle position.
h des
length, stitch wid igns I
Some of the des th and
can make are illu ign
strated on this pag s you
Additional ornam e.
ental efFects are
by sewing over
a filler cord. obtained I
I
es
I
Sewing Curtains
Stitch length: 2.5
uid
to3
Stitch width: me
dium
— 838 954 93-OU’7
-g
Appliqué work
—- 3.G79
36
All manuals and user guides at all-guides.com
Machine Care
Longevity and smooth machine performance
are dependent on regular cleaning and prop
er oiling. Since your Pfaff sewing machine
has been made from high-grade materials,
there are only a few oiling points left.
37
All manuals and user guides at all-guides.com
38
3
All manuals and user guides at all-guides.com
m
.co
Trouble Shooting If trouble should occur, check the foIIowing
When operated properly, your sewing ma • The needle must not be damaged and
chine will hardly develop any trouble. must be inserted correctly.
Please remember to restore the normal set • Selectthe correct needle and thread from
ting after you have completed your sewing the Needle and Thread Chart.
job (buttonhole sewing or darning, for in
stance) by switching the machine back to • Check whether the needle has been
straight stitching, flicking the needle posi threaded correctly.
tion lever to its central position, raising the
machine feed and setting the stitch length • Use only high-grade machine thread or
es
control on “2. sewing silk.
• Check to see that the bobbin case has
been inserted correctly.
• Both tensions must be balanced correctly.
•. Don’t force the feeding motion, merely
guide the material lightly.
• Clean and oil the machine as instructed.
uid
39
All manuals and user guides at all-guides.com
I;
Contents
Page
Page
I-
Appliqué Work 35
Blindstitching Inserting Lace 28
33 Inserting Patches
Buttonholes 30 27
Inserting the Bobbin Case 9
Button Sewing 32
.
Mechanism 15
7 Sewing Curtains
Essential Parts of Pfaff 76 34
2 Straight Stitching
Essential Parts of Pfaff 77 14
3 Trouble Shooting 39
Flat Felled Seams 21 Upper Threading 11
Foot Control 4 Winding the Bobbin
Foreword 7
1 Workplate of Pfaff 76
Fundamentals of Machine Operation 10
13 Workplate of Pfaff 77
Hemming 10
22 Zigzag Stitching
Hemstitching 25
24 Zipper Insertion
Inserting a Full Bobbin 20
8
40
All manuals and user guides at all-guides.com
CPFAFFD®
Printed in Germany
* .
*.