Professional Documents
Culture Documents
1
1
The pulley
diameter for the pump is 4”. What is the recommended size of the pulley?
2. Determine the length of a flat belt pulley drive having the following data
a. Diameter of 1st pulley = 300 mm
b. Diameter of second pulley = 400 mm
c. C-t-c distance of shafts = 10 m
3. The drive shaft of an engine is driving the rice mill line shaft that drives a 24 inches flat pulley in a crossed-drive
assembly. The drive shaft pulley has 6 inches diameter. The distance between pulleys measured from the center of
the shaft is 20ft. What would be the length of the belt needed for the drive? Add 1 ft from the computed belt length for
splicing purposes. Show your Fbd
4. A shaft delivers 10lbs at 10-cm crank radius. With a torque of 45.45kg-cm delivered at 80 rpm shaft rotation what
is the power delivered?
5. A cold rolled steel shaft 3ft long that has diameter of 4 in. is subjected to a torque of 15 kip-ft. Determine the
maximum shearing stress.