This document outlines the design and testing parameters for a patch antenna. It will use Rogers RT6002 and RT6010LM substrates, with dimensions of 15mm by 10mm. Frequency testing will occur between 20-28GHz. Results will include S11, VSWR, gain, and impedance both in free space and on the body. The patch will be copper and located on the top substrate, above a dielectric layer, with the ground plane and second dielectric layer below.
This document outlines the design and testing parameters for a patch antenna. It will use Rogers RT6002 and RT6010LM substrates, with dimensions of 15mm by 10mm. Frequency testing will occur between 20-28GHz. Results will include S11, VSWR, gain, and impedance both in free space and on the body. The patch will be copper and located on the top substrate, above a dielectric layer, with the ground plane and second dielectric layer below.
This document outlines the design and testing parameters for a patch antenna. It will use Rogers RT6002 and RT6010LM substrates, with dimensions of 15mm by 10mm. Frequency testing will occur between 20-28GHz. Results will include S11, VSWR, gain, and impedance both in free space and on the body. The patch will be copper and located on the top substrate, above a dielectric layer, with the ground plane and second dielectric layer below.
2. Substrate dimension: length*width = 15mm*10mm 3. Sandwiched Dielectric layer-I & II-Rogers RT6010LM(dielectric constant=2.94, thickness=0.254mm) 4. Frequency range – 20 to 28 GHz 5. No. of ports(connector) used –1 RESULTS REQUIRED: 1. S11 (for both free space and on body) 2. VSWR 3. Gain (for both free space and on body) 4. Impedance Design layout Front view