Professional Documents
Culture Documents
RC4002 Eng
RC4002 Eng
Scanreco remote
controls
AFTER - SALES DEPARTMENT
RC4002
e-learning@fassi.com
RC4002
F A S S I G R U S.p.A.
Sole shareholder - Company under the direction and coordination of Gestioni S.p.A. Cap. Soc. € 5.000.000,00 – Reg. Imp. BG n. 00834280166 - R.E.A. 175537–Cod. Op. Est. M/BG 006180 –
C.F./P.IVA 00834280166
F A S S I G R U S.p.A.
Sole shareholder - Company under the direction and coordination of Gestioni S.p.A. Cap. Soc. € 5.000.000,00 – Reg. Imp. BG n. 00834280166 - R.E.A. 175537–Cod. Op. Est. M/BG 006180 –
C.F./P.IVA 00834280166
1. Control levers of crane functions, linear or joystick. Moving a lever (up or down), the respective
hydraulic part of the crane moves.
2. Power button
3. Emergency button
4. RED LED indicating the operating status and status of the battery.
5. Speed selector. This control allows you to reduce the operating speed in 5 different steps, from 100%
speed to 60%, 50%, 40%, 30% and 20% by limiting the hydraulic steering.
6. Additional function buttons 1,2,3,4 and 5.
7. GREEN LED indicating the speed at which you are working on it:
- Led does not blink from 0% to 100%
- 1 flash every 3 seconds 0% to 60%
- 2 flashes every 3 seconds 0% to 50%
- 3 flashes every 3 secondsida 0% to 40%
- 4 flashes every 3 seconds 0% to 30%
- 5 flashes every 3 secondsida 0% to 20%
The push-button panel is connected to the electrical box via a flexible 3-core cable. This cable transmits
information from the remote control to the electrical box.
F A S S I G R U S.p.A.
Sole shareholder - Company under the direction and coordination of Gestioni S.p.A. Cap. Soc. € 5.000.000,00 – Reg. Imp. BG n. 00834280166 - R.E.A. 175537–Cod. Op. Est. M/BG 006180 –
C.F./P.IVA 00834280166
Cable for opto fibre operation
The remote control is connected to the electrical box via a fiber optic cable. This cable is used in operations
that require optical fiber.
Electrical box
The electronicbox is made of aluminum and is equipped with contacts for connection to the portable control
unit, the radio receiver box and the ON/OFF functions. There are also connections for power supply, electro-
hydraulic converter valves and drain valve.
F A S S I G R U S.p.A.
Sole shareholder - Company under the direction and coordination of Gestioni S.p.A. Cap. Soc. € 5.000.000,00 – Reg. Imp. BG n. 00834280166 - R.E.A. 175537–Cod. Op. Est. M/BG 006180 –
C.F./P.IVA 00834280166
Diagram for Scanreco RC400 radio connections
the cables numbered from 1 to 8 correspond to the levers of the remote control: each lever is associated
with a wiring that transfers the messages for the movement of the crane.
Ex-cable
A thin, flexible 7-core cable that can be connected to the electronic box for output ON/OFF functions, for
ongoing signal management, such as overload reduction and elevator functions, and for communications if
more than one electronic box is used.
F A S S I G R U S.p.A.
Sole shareholder - Company under the direction and coordination of Gestioni S.p.A. Cap. Soc. € 5.000.000,00 – Reg. Imp. BG n. 00834280166 - R.E.A. 175537–Cod. Op. Est. M/BG 006180 –
C.F./P.IVA 00834280166
EMERGENCY BUTTON FOR THE CRANE
On request it is also possible to provide a button for the emergency stop of the crane
tradio scraper
The radio transmitter board (which is encapsulated and has a well-proven integrated antenna) is mounted
on the electronic board of the control unit (HTX 402). The radio transmitter is connected via a pin strip, to
the electronic board and is screwed using four fixings.
F A S S I G R U S.p.A.
Sole shareholder - Company under the direction and coordination of Gestioni S.p.A. Cap. Soc. € 5.000.000,00 – Reg. Imp. BG n. 00834280166 - R.E.A. 175537–Cod. Op. Est. M/BG 006180 –
C.F./P.IVA 00834280166
Radio receiver box
The radio receiver box is made of aluminum and is equipped with accessories, a proven antenna and a
connector for connection to the electronic box. A green LED on the radio receiver indicates the supply
voltage.
When the radio receiver box is connected to the electronic box, a unique identity code is automatically added
to the control information.
F A S S I G R U S.p.A.
Sole shareholder - Company under the direction and coordination of Gestioni S.p.A. Cap. Soc. € 5.000.000,00 – Reg. Imp. BG n. 00834280166 - R.E.A. 175537–Cod. Op. Est. M/BG 006180 –
C.F./P.IVA 00834280166
Electrical box errors
TEST MODE
To simplify service and troubleshooting, the portable control unit can be put into TEST MODE
This means that the service man can easily control the switches of thecontrol unit without the need to open
it.
When each switch or lever is activated, a "beep" is emitted to confirm that the mode is working.
F A S S I G R U S.p.A.
Sole shareholder - Company under the direction and coordination of Gestioni S.p.A. Cap. Soc. € 5.000.000,00 – Reg. Imp. BG n. 00834280166 - R.E.A. 175537–Cod. Op. Est. M/BG 006180 –
C.F./P.IVA 00834280166
ID Code
Do the following:
F A S S I G R U S.p.A.
Sole shareholder - Company under the direction and coordination of Gestioni S.p.A. Cap. Soc. € 5.000.000,00 – Reg. Imp. BG n. 00834280166 - R.E.A. 175537–Cod. Op. Est. M/BG 006180 –
C.F./P.IVA 00834280166