Professional Documents
Culture Documents
Instructions For Use (User)
Instructions For Use (User)
Table of contents
1 Foreword ...............................................................6 5.3 Adjustments ....................................................15
2 Product Description .............................................7 5.3.1 Prerequisites ..................................................15
2.1 Function ..........................................................7 5.3.2 Adjusting the back angle ..................................15
2.2 Product Overview ..............................................7 5.3.3 Adjusting the side panels..................................16
5.3.4 Adjusting the footrests .....................................17
3 Safety .....................................................................8 5.3.5 Adjusting the belt lengths .................................18
3.1 Explanation of Warning Symbols .........................8
5.3.6 Adjusting the control panel ...............................18
3.2 General Safety Instructions ................................8
5.3.7 Adjusting the telescoping front frame .................19
3.3 Reference to additional safety instructions ............9
5.3.8 Changing control unit parameters......................19
3.4 Name plate and warning labels .........................10
3.4.1 Name plate .....................................................10 6 Usage ...................................................................20
3.4.2 Warning labels ................................................11 6.1 Side panels ....................................................20
6.2 Footrests ........................................................21
4 Delivery ................................................................12 6.3 Getting in / transfer..........................................21
4.1 Scope of supply ..............................................12
6.4 Control unit ....................................................23
4.2 Options ..........................................................12
6.4.1 Control Panel ..................................................23
4.2.1 Model B600 ....................................................12
6.4.2 Buttons and display functions ...........................24
4.3 Storage ..........................................................12
6.5 Driving Functions ............................................27
4.3.1 During daily use ..............................................12
6.5.1 Safety Instructions ...........................................27
4.3.2 In case of extended disuse ...............................12
6.5.2 Driving notes ..................................................30
5 Preparation for Use ............................................13 6.5.3 Switching on and off ........................................31
5.1 Safety Instructions ...........................................13 6.5.4 Selecting the speed levels ................................31
5.2 Initial operation ...............................................14 6.5.5 Driving ...........................................................32
5.2.1 Locking the back angle adjustment in place ........14 6.5.6 Range ............................................................33
B600 Ottobock | 3
Table of contents
4 | Ottobock B600
Table of contents
B600 Ottobock | 5
Foreword
6 | Ottobock B600
Product Description
• The operational safety of the wheelchair can only be 2.2 Product Overview
ensured if it is used properly in accordance with the
information contained in these instructions for use. The
user is ultimately responsible for accident-free opera
tion.
• Your wheelchair model may differ from the models
shown. In particular, not all the options described in
these instructions for use will be installed on your wheel
chair.
• We reserve the right to make technical changes to the
model described in these instructions for use.
2 Product Description
2.1 Function Fig. 1 Main components
The wheelchair is designed solely for individual use by per
sons who are unable to walk or who have a walking impedi 1 Backrest 7 Caster wheel
ment, and can be operated either by the patient or by anoth 2 Side panel 8 Anti-tipper
er person. 3 Control panel 9 Drive wheel
The wheelchair can be used on solid ground both indoors 4 Footrest 10 Bumper
and outdoors. 5 Charging receptacle 11 Rear LED lights
6 Motor cover 12 Back angle adjustment
B600 Ottobock | 7
Safety
8 | Ottobock B600
Safety
NOTICE
Use under incorrect environmental conditions
Damage to the product
► Only use the product within a temperature range of -25
°C to +50 °C.
B600 Ottobock | 9
Safety
10 | Ottobock B600
Safety
B600 Ottobock | 11
Delivery
12 | Ottobock B600
Preparation for Use
Please observe the following if the power wheelchair is not • Avoid unnecessary parking outdoors. Direct exposure to
used for more than 3 days: sunlight/UV radiation causes the tyres to age more
quickly. As a result, the tread surface hardens and
Storage conditions
corner pieces break out of the tread.
• Maintain an ambient temperature between -40 °C and
• The tyres must be changed when the tread is less than 1
+65 °C and a relative humidity between 45 % and 85 %.
mm to ensure safe driving behaviour.
• Store the power wheelchair in a dry, enclosed room with
• The tyres should be replaced every 2 years regardless
sufficient air circulation and protection from external
of wear and tear.
influences.
• Protect the wheels against ground frost, e.g., by reliev
ing them completely through assembly blocks or 5 Preparation for Use
wooden boards.
5.1 Safety Instructions
• Fill the wheels with slight overpressure and rotate them
at regular weekly intervals to prevent flat tyres from WARNING
extended standing. Improper modification of the settings
Note regarding the tyres Risk of tipping, falling, improper user posture
• If the power wheelchair is not moved for several days, ► Do not modify the settings established by the qualified
permanent colour changes may occur where the wheel personnel.
chair comes into contact with the surface it is standing ► In case of problems with the settings (control panel
on. Therefore a suitable underlay should be used if the problems etc.), please contact the qualified personnel
product is parked for extended periods of time. who fitted your product.
• Tyres contain chemical substances that can react with
other chemical substances (such as cleaning agents, WARNING
acids, etc.). Improper handling of packaging materials
• Black tyres contain soot particles. They may leave black Risk of suffocation
marks where they come into contact with the ground. ► Keep packaging materials away from children.
Therefore the manufacturer recommends grey tyres if
the wheelchair is primarily used indoors.
B600 Ottobock | 13
Preparation for Use
14 | Ottobock B600
Preparation for Use
5.3 Adjustments
5.3.1 Prerequisites
Fine fitting/adjusting work should always be performed with
the user. The user should sit upright in the power wheel
chair while adjustments are made.
Seat height, seat width and seat angle are set according to
the customer order and may only be changed by a specialist
dealer.
The following can be adjusted by the user:
• Back angle
• Armrest height and position
• Lower leg length
• Strap lengths
• Position of the control panel
All parts of the product should be cleaned thoroughly before
adjustments are made.
Fig. 2 Place the cross bolt into the bracket (top); locked 5.3.2 Adjusting the back angle
cross bolt (bottom)
Standard/contour seat
1 Cross bolt 2 Lock with lever 1) Pull on the strap until the locking bolts are free.
2) Change the backrest angle to the desired position.
3) Release the strap. The locking bolts engage at the
desired position.
B600 Ottobock | 15
Preparation for Use
Recaro® seat
WARNING
Incorrect Recaro® Seat settings
Risk of falling, tipping Fig. 4 Adjusting the Recaro® seat angle
► Note that the maximum backrest angle is 30° while 1 Release handle
standing and 20° while driving. 2 Back angle adjustment knob
16 | Ottobock B600
Preparation for Use
Adjusting the armrest height → Version 2: Slide the armrest with the spare tube for
1) Loosen the Allen head screw on the side panel with a ward or backwards along the attachment rail to the
size 3 Allen key (see Fig. 5). desired position ((see Fig. 6), right).
2) Slide the armrests up or down to the desired position. 3) Tighten the 2 Allen head screws.
3) Tighten the Allen head screw.
B600 Ottobock | 17
Preparation for Use
► Ensure that your fingers are not in the danger area 5.3.6 Adjusting the control panel
when flipping the footrests up or down.
INFORMATION
1) Loosen the grub screws or Allen head screws (depend The power wheelchair may be equipped with an optional
ing on the version) on the footplate bar (see Fig. 7). height-adjustable or swing-away control panel holder (see
2) Adjust the footplate bar to match the user's lower leg Page 65).
length.
INFORMATION: Ensure that the footplate bar is Adjusting the control panel to the forearm length
inserted into the swivel segment by at least 40 mm. 1) Loosen the 3 set screws on the bottom of the armrest.
3) Tighten the grub screws or Allen head screws (depend 2) Slide the rail with the control panel forwards or back
ing on the version) on the footplate bar. wards.
INFORMATION: If the control panel rail is too long
it can be shortened. Please contact the qualified
personnel who adjusted your product.
3) Tighten the 3 set screws on the bottom of the armrest.
18 | Ottobock B600
Preparation for Use
Changing the control panel side 5.3.8 Changing control unit parameters
By default, the control panel is mounted on the side spe
cified in the order. It can also be mounted on the other side WARNING
later on if the user so desires. Incorrect configuration settings
Falling, tipping over, collision due to programming errors
INFORMATION ► Programming may only be performed by qualified per
The control panel mounting side may only be changed by sonnel trained by the manufacturer. The manufacturer
authorised personnel. of the product and the control unit manufacturer are
not liable in case of damage caused by programming
5.3.7 Adjusting the telescoping front frame which was not performed properly and/or which was
The telescoping front frame of the power wheelchair allows not adjusted properly according to the user's abilities.
the wheelbase to be adapted to the respective seat (see
Fig. 9). Because this adjustment involves the displacement
of the centre of gravity, it may only be carried out by quali
fied personnel.
B600 Ottobock | 19
Usage
► Note that modified parameter settings in the configura 3) Only for a side panel with a control panel: carefully let
tion can lead to changes in driving characteristics. In the side panel with the control panel hang down.
particular, changes to the speed, acceleration, braking INFORMATION: If necessary, the hook-and-loop
or joystick settings can lead to unexpected and there closures for routing the control panel cable can be
fore uncontrollable driving characteristics and cause undone and the control panel can be removed.
an accident.
► After configuration/programming is complete, the user
must test the driving characteristics of the product
under the supervision of the qualified personnel.
If necessary, the qualified personnel can fit the already pre
programmed wheelchair control system and accessories to
the specific user requirements.
6 Usage
6.1 Side panels
INFORMATION
Fig. 10 Side panel wing screw
For additional information on side panels with lighting: see
Page 66. Installing the side panel
1) If necessary, install the control panel and fasten the
Removing the side panel hook-and-loop closures for routing the control panel
1) Loosen the wing screw on the side panel holder (see cable.
Fig. 10). 2) Insert the side panel into the side panel holder.
2) Pull the side panel out from the side panel holder and 3) Re-tighten the wing screw on the side panel holder.
set it aside.
20 | Ottobock B600
Usage
B600 Ottobock | 21
Usage
CAUTION
Exposed pinch points
Pinching, crushing of fingers
► Ensure that your fingers are not in the danger area
when flipping the footrests up or down.
1) Place the seat in the horizontal position.
2) Flip the footrests up (see Fig. 12) or remove them to
gain a larger entry and exit area (see Fig. 11). Removing
the footrests increases the available entry or exit area
(see Fig. 13).
Fig. 12 Footrest flipped up
3) Have an attendant assist you or use a transfer lifter to
get into and out of the power wheelchair.
4) Flip the footrest down or reinstall it and flip it down (see
Page 21).
5) Put the lap belt on when necessary (when driving on the
road).
22 | Ottobock B600
Usage
Getting in from the side Because the control unit is programmable, it can be adap
1) Place the seat in the horizontal position. ted to the personal requirements of the user; e.g. the speed,
2) Bring the power wheelchair as close as possible to the acceleration and deceleration values can all be adapted.
seat surface upon which the user is seated.
6.4.1 Control Panel
3) Remove the side panel (see Page 20). The power wheelchair is operated using the control panel.
INFORMATION: If the control panel is on the side
The control panel consists of a keypad, an LCD display and
from which the user is getting into the wheelchair,
a joystick. The charging/programming receptacle and two
it can be removed and set down on the seat.
inputs for external buttons are located on the underside.
4) Remove the footrest if necessary (see Page 21).
The control panel is used to switch the power wheelchair on
5) Slide into the seat from the side. and off, enter driving commands and display the current
INFORMATION: A slide board makes it easier to get statuses of certain functions and components.
into and out of the wheelchair from the side.
6) Install the side panel (see Page 20).
7) Put the lap belt on when necessary (when driving on the
road).
B600 Ottobock | 23
Usage
Fig. 14 enAble50 control panel (identical to: enAble40) Fig. 15 Connections on the underside
1 Joystick 5 [Warning Flasher On/Off] 1 External [On/Off] button connection (only on enAble50)
button 2 External [Mode] button connection (only on enAble50)
2 [On/Off] button 6 [Horn] button 3 Charging/programming receptacle
3 LCD display 7 [Direction Indicator
Left/Right] button
6.4.2 Buttons and display functions
4 [Mode] button 8 [Lights On/Off] button
INFORMATION
If your power wheelchair is equipped with an LCD monitor,
please also read the chapter "Separate LCD Monitor" (see
Page 54).
24 | Ottobock B600
Usage
B600 Ottobock | 25
Usage
Display Information
Right: Selected speed level = 1
Left: Battery capacity
26 | Ottobock B600
Usage
• After brief operation the battery indicator shows the Display Information
exact battery status. Charging process with drive-away
• A charge of 100% corresponds to seven segments on lock
the battery symbol.
• As the remaining battery capacity decreases, the LCD Battery undervoltage with warning
segments turn off one by one. symbol
• If only one blinking segment is shown on the LCD dis
play, then the battery is in a low voltage state. Because Battery overvoltage with warning
further use will result in battery damage, the warning symbol
signal is also shown on the LCD display. The battery
must be charged immediately. Further LCD display functions
• If all seven segments on the LCD display are flashing, Further LCD display symbols are described in the following
this means that the battery is in an overvoltage state. sections:
Because further use will result in battery damage, the • See section 'Usage' > 'Drive-Away Lock'
warning signal is also shown on the LCD display. • See section 'Usage' > 'Seat Functions'
Please continue to drive at low speed only.
• See section 'Maintenance/Repair' > 'Troubleshooting'
• The charging process is indicated by the battery seg
ments lighting up one after the other. The driving func 6.5 Driving Functions
tion is blocked when the battery is charging.
6.5.1 Safety Instructions
Battery indicator on the control panel
Display Information CAUTION
Full battery capacity (right: selected Lack of driving experience
speed level) Risk of tipping, falling
► Practise using the product on level, open ground first.
Low battery capacity
B600 Ottobock | 27
Usage
Hazards while driving ► If any faults, defects or other hazards that can lead to
personal injury are detected, the product must be
WARNING taken out of service immediately.
Uncontrolled rolling ► Contact your authorised specialist dealer if uncon
Risk of collision with persons nearby objects trolled movement of the product occurs due to a mal
► Note the lack of brake functionality when the brake is function.
deactivated. The brake function may only be released
in the presence of an attendant. CAUTION
► Should the user be unable to release the brake him Driving in the dark
self, the brake can be released by the attendant. Risk of an accident involving other traffic, collision with
► Note that when the power wheelchair is moved on an persons or objects in the vicinity.
incline, the attendant must provide the required brake ► Wear bright clothing or clothing with reflectors.
force.
► Turn the lights on (if available) or install active lights.
► Lock the brake every time before parking the power
► Ensure that the reflectors on the power wheelchair are
wheelchair.
clearly visible.
CAUTION
CAUTION
Insufficient support of the seated person
Use of mobile devices with electromagnetic emis
Risk of falling out of the power wheelchair
sions (e.g., mobile phones)
► Always wear the safety belt / lap belt when driving in Falling, collision with persons or objects due to interfer
public. ence with the control signals
► Turn all mobile devices off while driving, since the driv
CAUTION ing characteristics of the product are affected by elec
Risk of uncontrolled driving behaviour tromagnetic fields.
Risk of falling, tipping, collision with persons or nearby
objects
28 | Ottobock B600
Usage
► Turn the control unit off when it is not required, since Hazards due to defective tyres
the product may generate electromagnetic fields that
can cause interference with other devices. The product CAUTION
has been tested according to EMC regulations. Defective tyres
► Notwithstanding compliance with all applicable EMC Accidents/falling due to poor traction, reduced braking
directives and standards, the product can be affected force or lack of manoeuvrability
by interference from other electric devices (e.g., ► Maintain sufficient tyre pressure. The correct tyre pres
department store EAS systems) or cause interference sure is printed on the casing.
with such devices. If this occurs, move your product ► Ensure that the drive wheels have the same pressure.
outside the interference range. ► Ensure that the tyres have sufficient tread depth. The
tyres must be changed when the tread depth is less
Danger during use of public transportation, elevators, than 1 mm.
lifting platforms ► Avoid parking outside and in direct sunlight (UV radi
WARNING ation) since this causes the tyres to age quickly. The
manufacturer recommends replacing the tyres every
Use of public transportation, elevators, lifting plat
2 years regardless of the amount of wear.
forms
► Always maintain sufficient clearance from sources of
Risk of tipping, collision with persons or objects in the
heat. If the product is parked for an extended period of
vicinity
time or the tyres overheat (e.g., in the vicinity of radiat
► Always turn the power wheelchair control unit off when ors or in case of exposure to strong sunlight behind
using buses, trains, elevators, or lifting platforms. glass), the tyres may become permanently deformed.
► Engage the brake. ► Move your power wheelchair frequently or have a way
to jack it up for storage.
B600 Ottobock | 29
Usage
30 | Ottobock B600
Usage
6.5.3 Switching on and off ware, triggering an emergency stop or reducing the speed
of the product. A warning signal will also sound.
WARNING
Lack of brake functionality • Pressing the [On/Off] button (see Fig. 14, item 2) turns
the power wheelchair control unit on or off. The power
Risk of falling, tipping, collision with persons or nearby
wheelchair turns off automatically if the control unit is
objects
not used for an extended period of time.
► Ensure that the brake release lever is locked every time
• The power wheelchair brakes automatically and comes
before you drive.
to a stop if it is turned off with the [On/Off] button while
► Check to ensure that the brakes are operational and driving.
functional every time before you drive.
• The specialist dealer can use the parameter settings to
specify the default speed level or default menu of the
WARNING power wheelchair after it is turned on, according to the
Defective safety functions user's requirements.
Risk of falling, tipping, collision with persons or nearby
objects 6.5.4 Selecting the speed levels
• The power wheelchair has a programmable number of
► Before every use, ensure that the product and its safety
speed levels (delivery condition = 5 speed levels).
functions are in safe and proper condition.
• The speed level is increased by briefly pressing the
► Only use the product if all safety functions, e.g. the
[Mode] button (see Fig. 14, item 4).
automatic brakes, are functional.
• After reaching the maximum speed level, the next speed
level is 1.
INFORMATION
• The LCD display indicates the selected speed level in
In dangerous situations, the product can be turned off at the Driving menu:
any time using the on/off button. When the button is
pressed, the product brakes immediately and the electrical Display Information
functions cease. Malfunctions such as an insufficient sup Selected speed level = 1 (left: bat
ply of power to the controls are recognised by the soft tery capacity)
B600 Ottobock | 31
Usage
• The selected speed level is shown on the bottom left of ► Only drive on inclines and over obstacles with the seat
the separate LCD monitor (see Fig. 33, item 11). tilt and seat height adjustments lowered and with a ver
tical backrest. The seat can be tilted back slightly when
Display Information driving downhill.
Selected speed level = 2 (see ► Avoid embarking and disembarking on inclines and
Fig. 33, item 11) slopes.
► Do not drive over stairs.
WARNING
6.5.5 Driving Driving on unsuitable surfaces
WARNING Risk of falling, tipping
Driving on slopes, over obstacles ► Do not operate the power wheelchair on very smooth
Falling, tipping over due to user errors surfaces (e.g. icy surfaces) or very rough surfaces
(e.g. gravel or rubble).
► Only drive on slopes up to max. 9.5° (17 %).
► Only cross obstacles which are not higher than 50 mm
CAUTION
(2 in).
► Do not cross over any obstacles while driving on Insufficient support of the seated person
inclines or downgrades. Risk of falling out of the power wheelchair
► Reduce speed when driving downhill (e.g. select ► Always wear the safety belt / lap belt when driving in
speed level 1). public.
► Only drive over obstacles such as steps or low curbs
at a reduced speed (max. 3 km/h). INFORMATION
► Approach obstacles at right angles and drive over The control unit of the product switches to a safe mode at
them at one go. elevated temperatures and after driving uphill for extended
periods of time, limiting the performance of the product.
32 | Ottobock B600
Usage
The user is able to drive the product out of a hazardous • Age of the batteries
situation at any time. The product is fully functional again • Ambient temperature
once the unit has cooled down sufficiently (this may take • Driving conditions (e.g. terrain profile, condition of sur
several minutes depending on the ambient temperature). face)
The power wheelchair is controlled by moving the joystick: • Charging method
• The further the joystick is deflected from the centre posi • Use of power options
tion, the faster the power wheelchair will drive in this dir • Body weight of user
ection.
• The maximum speed at full deflection of the joystick 6.5.7 Drive-away lock
depends on the selected speed level.
INFORMATION
• Releasing the joystick automatically activates the brake
function, bringing the power wheelchair to a halt. The drive-away lock can only be activated as described
below if the function was previously enabled (see inside
The mechanical brakes are activated automatically when the
front cover). The factory default setting can be changed by
power wheelchair comes to a stop so that it cannot roll.
the specialist dealer.
6.5.6 Range Please ask your specialist dealer about the setting selected
for you.
INFORMATION
The power wheelchair control unit features an electronic
► Information about the range of the power wheelchair
drive-away lock. This function is activated/deactivated via
can be found in the chapter 'Technical Data'.
the control panel.
► Please note that the specified range was determined
The drive-away lock can only be activated or deactivated if
under defined conditions in accordance with ISO
the "Drive-away lock" parameter is set to "Function
7176-4. In practice the range can be reduced by up to
enabled". Unless otherwise specified in the order, the drive-
50%.
away lock is set to "Function disabled" at the factory.
The following factors influence the range of a power wheel If this setting needs to be changed, this is done by the
chair: authorised person who fitted the wheelchair.
• Battery capacity
B600 Ottobock | 33
Usage
34 | Ottobock B600
Usage
Problem resolution • Turning is not possible when the steering lock is activ
The drive-away lock remains active if the joystick is not ated.
moved correctly. • The warning flasher lights flash when the steering lock
1) Turn the control unit off in order to deactivate the drive- is activated (standard programming).
away lock again.
Activating the steering lock
2) Turn the power wheelchair on.
1) Bring the power wheelchair to a full stop.
3) Deactivate the drive-away lock again.
2) Push the [Warning Flasher On/Off] button.
6.5.8 Steering lock → The steering lock is activated.
→ All warning flasher lights flash (standard program
INFORMATION ming).
For the models with enAble50 control units the steering 3) Move the joystick forward/backward. The power wheel
lock can only be activated as described below if the func chair now drives straight ahead/back.
tion was previously enabled (see inside front cover). The
factory default setting can be changed by the specialist Deactivating the steering lock
dealer. 1) Bring the power wheelchair to a full stop.
Please ask your specialist dealer about the setting selected 2) Push the [Warning Flasher On/Off] button.
for you. → The steering lock is deactivated.
→ All warning flasher lights stop flashing.
The enAble50 control unit in the power wheelchair may be
programmed with the optional 'Steering Lock' parameter. 3) Move the joystick. The power wheelchair now drives in
the chosen direction without the steering lock.
If the steering lock is activated, the caster wheels or the
drive wheels (depending on the type) are set straight ahead. 6.5.9 Adjusting the driving characteristics
This makes it easier to negotiate narrow ramps and to use
lifts: WARNING
• When the joystick is deflected forward, the power Incorrect configuration settings
wheelchair drives straight ahead. Falling, tipping over, collision due to programming errors
• When the joystick is deflected backward, the power
wheelchair always drives straight back.
B600 Ottobock | 35
Usage
► Programming may only be performed by qualified per ► Should the user be unable to release the brake him
sonnel trained by the manufacturer. The manufacturer self, the brake can be released by the attendant.
of the product and the control unit manufacturer are ► Note that when the power wheelchair is moved on an
not liable in case of damage caused by programming incline, the attendant must provide the required brake
which was not performed properly and/or which was force.
not adjusted properly according to the user's abilities. ► Lock the brake every time before parking the power
► Note that modified parameter settings in the configura wheelchair.
tion can lead to changes in driving characteristics. In
particular, changes to the speed, acceleration, braking WARNING
or joystick settings can lead to unexpected and there
Improper maintenance, repair, or adjustment work on
fore uncontrollable driving characteristics and cause
the brake
an accident.
Falling, tipping, collision with persons or nearby objects
► After configuration/programming is complete, the user
must test the driving characteristics of the product ► Repairs and adjustments to the brake may only be
under the supervision of the qualified personnel. made by qualified personnel trained by the manufac
turer. Incorrect settings can lead to a loss of braking
Adjusting and setting the speed, acceleration and decelera power.
tion values to the individual user requirements is performed
exclusively by qualified personnel trained by the manufac It is possible to push the power wheelchair in case of con
turer. trol unit failure or insufficient battery capacity. To do so, it is
necessary to disable the brake using the release mechanism
6.6 Enabling/disabling the brakes described below.
The brake release is located between the frame and seat, on
WARNING either the right or left side according to customer prefer
Uncontrolled rolling ence.
Risk of collision with persons nearby objects
► Note the lack of brake functionality when the brake is
deactivated. The brake function may only be released
in the presence of an attendant.
36 | Ottobock B600
Usage
B600 Ottobock | 37
Usage
6.7.2 General
The standard version of the power wheelchair is equipped
with two maintenance-free gel batteries with a total capacity
of 63 Ah (C5).
The power wheelchair can optionally be equipped with two
AGM batteries with a total capacity of 63 Ah (C5).
The batteries are located beneath the wheelchair seat in a
battery drawer. If the power wheelchair is not equipped with
a drive wheel suspension, then the batteries are located in a
tray.
Prolonged driving at the lower end of the battery indicator
results in deep discharge which causes battery damage. If
Fig. 18 Enabling the brake the power wheelchair is being driven when the battery is low
the control unit switches to creep speed to save power.
6.7 Batteries/charging process
6.7.3 Battery charging information
6.7.1 Safety Instructions The range of the power wheelchair is determined by the bat
tery capacity. The battery capacity is influenced by many
NOTICE
factors. In addition to the temperature, battery age and driv
Unauthorised battery replacement
ing conditions, the charging cycle also has a pronounced
Damage to the battery due to user error effect on the capacity and therefore on the range.
► Replacing the battery or modifying the battery installa At temperatures of < 0° the battery capacity drops by up to
tion position may only be performed by qualified per 35% in relation to the capacity for an outside temperature of
sonnel trained by the manufacturer. 20°. This shortens the range of the power wheelchair
► The charging profile of the battery charger established accordingly. Moreover the battery capacity displayed on the
at the factory matches the batteries included in the control panel can differ more significantly from the actual
scope of delivery and may not be altered independ battery capacity.
ently.
38 | Ottobock B600
Usage
The following information should be observed for an optimal 6.7.4 Battery charger
charging cycle:
• The batteries can be charged at any time, regardless of NOTICE
the remaining battery capacity. Improper use of the battery charger
• It takes about 10 hours until a discharged battery (only Damage to the battery charger, damage to the battery due
1 flashing segment) is completely charged. When the to user error
charging process is complete, the battery charger can ► Only use battery chargers from Ottobock, which have
remain connected to the power wheelchair with no risk been verified and approved by the manufacturer for
of overcharging or damaging the battery. The battery use with the respective batteries (observe information
charger features a programmed recharging phase that on the battery charger).
will maintain the battery capacity at the level that has ► Ensure that the information on the battery charger
been reached. nameplate matches the country-specific voltage of the
• If the power wheelchair is used every day, the battery respective mains grid.
should be charged every night. ► Only use the battery charger within the specified tem
• Never discharge the batteries completely (deep dis perature and humidity limits.
charge). ► Place the battery charger on a level surface.
• The batteries will gradually discharge if the wheelchair ► If you locate the battery charger near a window, pro
is not used for extended periods of time. If the power tect it from direct sunlight.
wheelchair is not used for an extended period, the bat ► Avoid overheating of the battery charger. Do not cover
teries should be charged 1 x per week to maintain their the ventilation slits in the case.
capacity. ► Switch the control unit off during the charging process
• The fuse should be removed if the wheelchair is not so that all of the charging current is fed into the bat
used for more than 3 days. tery.
• The power wheelchair control unit must be switched off ► Avoid dust, dirt and moisture.
while the batteries are charging to allow all of the char ► Only clean the battery charger with a dry cloth.
ging current to be fed into the battery.
The battery charger is designed for maintenance-free and
low-maintenance batteries.
B600 Ottobock | 39
Usage
Please see the instructions for use supplied with the battery NOTICE
charger for further details on use and on the LED displays.
Improper charging
6.7.5 Charging the battery Damage to the batteries due to user error
► Avoid deep discharge of the battery. The manufacturer
WARNING does not assume any liability for damage due to deep
Discharge of explosive gases during battery charging discharge.
Burns due to explosion after a user error ► Charge the battery as soon as possible if the last three
► Ensure sufficient ventilation in enclosed spaces. segments of the "Battery Capacity" LED indicator are
► Do not smoke or light fires. flashing.
► Sparks must be avoided. ► Charge the batteries weekly if the power wheelchair is
► Do not cover the ventilation slits in the case. not used for an extended period of time.
► Only use battery chargers which have been verified 1) Turn the control unit on the power wheelchair off.
and approved by the manufacturer for use with the 2) Connect the charging plug of the battery charger to the
respective batteries (observe information on the battery charging receptacle:
charger). Non-observance may result in explosion of
→ Version 1: Plug the battery charger plug into the
the battery, resulting in a health hazard.
charging/programming receptacle on the power
► Follow the battery manufacturer safety instructions. wheelchair control panel (see Fig. 19).
→ Version 2: Insert into the charging receptacle on
WARNING the power wheelchair (see Fig. 20)
Sparks INFORMATION: Charging via this charging
Risk of injury due to fire or explosion receptacle is faster than via the control panel.
► Switch the battery charger off and disconnect the 3) Connect the battery charger to the mains socket and
mains plug before you disconnect the battery. turn it on.
→ The charging process starts automatically and the
battery capacity is indicated by the LCD screen on
the control panel and on the battery charger.
40 | Ottobock B600
Usage
WARNING
Fig. 19 Charging/programming receptacle on the control pan Driving with power seat options
el
Falling, tipping over due to user error
► Drive in street traffic only with the seat tilt and seat
height adjustments lowered and with a vertical back
rest.
B600 Ottobock | 41
Usage
► Drive with the seat raised or with the seat tilt/back WARNING
angle adjustment activated only for short distances at
Exposed pinch points in the seat adjustment and lift
home. Always use the speed level 1 for this. Note that
ing areas
the field of vision is limited when driving.
Risk of pinching, crushing of limbs
► Slightly tilt the seat to the rear when driving forwards
► Note that when power seat options are used, inherent
down inclines or over obstacles (e.g. curbs) and
pinch and shear points are located between the seat
reduce the speed.
frame and the power wheelchair frame.
► Use the seat height adjustment and the seat tilt only on
firm, level ground. ► Ensure that no body parts, such as hands or feet, are
in the danger area while power seat options are used.
► Note that the climbing ability of power wheelchairs with
electric seat height adjustment and seat tilt is reduced. ► Ensure that no interfering objects, such as clothing or
Driving on inclines and slopes is permitted under ISO other obstacles, are in the danger area while power
seat options are used.
7176-1 and 7176-2 with lowered seat height adjust
ment and lowered seat tilt up to max 6° (10%).
WARNING
WARNING Overloading of the actuators
Overloading Risk of falling, tipping, pinching, crushing of limbs
Falling, tipping over due to non-compliance with technical ► Avoid overloading the actuators. Overloading may
data cause the spindle nut to break, causing the seat to sag
► Note that the maximum permitted load of the power or the backrest to flip back suddenly.
wheelchair may be reduced when using the options
"Electric seat height adjustment" and "Electric seat tilt" NOTICE
(see section "Technical Data"). Improper use of power seat options
Risk of damage to the product
42 | Ottobock B600
Usage
► When using power seat options, note that the seat ► Ensure that creep speed is activated when the seat
function actuators are not designed for continuous height adjustment function is used. If this is not the
use, only for short-term use under limited loads (10% case, contact a specialist dealer immediately. Only use
load, 90% idle time). the power wheelchair with the seat height adjustment
► Observe the following guidelines: At maximum load in its lowest position until the fault is rectified.
capacity, 10 seconds of activation time must be fol
lowed by approx. 90 seconds of idle time. The power NOTICE
seat functions are considered independently of the Lack of maintenance of the seat height adjustment
driving function for this purpose. feature
► Only activate the power seat functions if no fault or Risk of damage to the power wheelchair
error is present. ► Inspect the seat height adjustment feature for visible
signs of damage at least 1 x per month and ensure all
6.8.2 Power seat height adjustment screw connections are tight.
WARNING ► Check for correct tire pressure.
Improper use of the seat height adjustment feature
Risk of falling or tipping over due to operator error NOTICE
► Use the seat height adjustment feature only with the Risk of transportation damage.
backrest in the upright position. Risk of damage to the power wheelchair
► Drive in street traffic only with the seat height adjust ► Always lower the seat height adjustment feature fully
ment lowered. for loading or transportation.
► When driving with the seat height adjustment feature
raised, fasten the belts (lap belt, four-point belt) and do INFORMATION
not lean out beyond the seat surface. ► Please also observe the safety instructions in the sec
tion "Power Seat Functions" > "Safety Instructions for
Use".
B600 Ottobock | 43
Usage
► Observe the instructions for use in the sections "Power resistance. This is indicated by a snail symbol on the control
Seat Functions" > "Control of Power Seat Functions" panel or on the optional, separate LCD screen.
and "Joystick and Display Functions".
The power wheelchair can be equipped with a power seat
height adjustment feature. The seat height adjustment fea
ture raises the seat using a motor drive.
The power seat height adjustment feature is available in dif
ferent versions:
• Power seat height adjustment to 40 cm (basic model)
• Power seat height adjustment to 30 cm (model with rein
forced chassis)
WARNING
Fig. 21 Seat with raised seat height adjustment feature Incorrect seat tilt handling
The driving function remains available even when the seat is Falling, tipping over due to user error
raised. The speed can be reduced (creep speed) if neces ► Use the seat tilt feature only with the backrest in the
sary when the seat is raised due to the decreased tipping upright position.
44 | Ottobock B600
Usage
INFORMATION
► Please also observe the safety instructions in the sec
tion "Power Seat Functions" > "Safety Instructions for
Use".
► Observe the instructions for use in the sections "Power
Seat Functions" > "Control of Power Seat Functions"
and "Joystick and Display Functions".
Fig. 23 Power seat tilt
The power wheelchair can be equipped with a power seat
tilt function. For more information on the specific equipment 6.8.4 Power back angle adjustment
of this power wheelchair contact the qualified personnel.
WARNING
The power seat tilt function allows the seat to be tilted, for
Incorrect use of back angle adjustment
example to relieve pressure. The power seat tilt feature is
available in three different versions: Falling, tipping over due to user error
• Power seat tilt up to 20° ► Drive in street traffic only with a vertical backrest.
► When driving with the back angle adjustment activ
• Power seat tilt up to 30°
ated, fasten the belts (lap belt, four-point belt) and do
• Power seat tilt up to 45° not lean out beyond the seat surface.
The seat can be tilted back continuously to the angle spe
cified above. INFORMATION
► Please also observe the safety instructions in the sec
tion "Power Seat Functions" > "Safety Instructions for
Use".
B600 Ottobock | 45
Usage
► Observe the instructions for use in the sections "Power ► Observe the instructions for use in the sections "Power
Seat Functions" > "Control of Power Seat Functions" Seat Functions" > "Control of Power Seat Functions"
and "Joystick and Display Functions". and "Joystick and Display Functions".
The power wheelchair with standard or contour seat can be To avoid constant pressure or to ensure anti-shock support,
equipped with a power back angle adjustment feature. the power wheelchair can be equipped with power
The power back angle adjustment feature allows for continu adjustable footrests. The footrests can be activated individu
ous tilting of the backrest up to 30°. ally or at the same time, depending on the configuration.
46 | Ottobock B600
Usage
INFORMATION
To operate the seat functions with installed LCD monitor:
see Page 54.
• Holding the [Mode] button (approx. 2 seconds; see
Fig. 14) activates control of the first power seat function,
e.g. the power back angle adjustment or seat tilt.
• The LCD display indicates the currently selected seat
function (see following chapter "Joystick and Display
Functions").
• To switch between the various seat functions, press the
[Mode] button briefly or move the joystick to the right.
B600 Ottobock | 47
Usage
INFORMATION
To operate the seat functions with installed LCD monitor: see Page 54.
The following power seat functions can be controlled with the joystick:
Display Display Seat function Joystick* movement
Power seat height Forward: Seat surface moves up
adjustment Back: Seat surface moves down
48 | Ottobock B600
Usage
B600 Ottobock | 49
Usage
WARNING
Exposed pinch points in the seat adjustment area
Risk of pinching, crushing of limbs
► Note that when manual seat options are used, inherent
pinch and shear points are located between the seat
frame and the power wheelchair frame.
► Ensure that no body parts, such as hands or feet, are
in the danger area while manual seat options are used.
► Ensure that no interfering objects, such as clothing or Fig. 27 Manual elevating footrest
other obstacles, are in the danger area while manual
seat options are used.
6.10 Additional seat options
The power wheelchair can be equipped with a range of oth
6.9.2 Manual elevating footrests er seat options.
The power wheelchair can be equipped with manual elevat 6.10.1 Contour seat
ing footrests. Compared to the standard seat, the contour seat provides
The manual elevating footrests make it possible to prevent a the user with improved comfort and lateral support.
constant pressure load or to provide anti-shock support.
Swivelling the footrest
1) Activate the release lever on the footrest (see Fig. 27).
2) Move the footrest to the desired position.
3) Let go of the release lever.
50 | Ottobock B600
Usage
B600 Ottobock | 51
Usage
CAUTION
Recaro® seat not locked in place
Risk of tipping
52 | Ottobock B600
Usage
B600 Ottobock | 53
Usage
54 | Ottobock B600
Usage
B600 Ottobock | 55
Usage
Driving menu
• The power wheelchair is operated with the Driving Drive-away lock activated (Drive-away
menu (see Fig. 33). lock)
• The status of the driving functions as well as malfunc
tions/faults are displayed, e.g.:
Menu Information
Navigating in the main Menu > Sub menus
Driving menu with speed level and bat
• The main menu is displayed after holding the [Mode]
tery capacity
button (approx. 2 seconds) on the control panel (see
Left direction indicator on
Fig. 32). All important power wheelchair functions can
be selected and used from here.
Driving menu with speed level • Use the joystick to navigate from the Main Menu (see
Fig. 32) to the Options menu and the Favourites
Low battery capacity (see Page 84)
menu:
56 | Ottobock B600
Usage
Menu Information
Move back: Opens the Favourites menu Speed level menu selectable: see next
table
(Monitor is Move left: Stop function (monitor turns off) Seat function menu selectable: see next
blank) table
Options menu (menu colour = green)
• The Options menu can be used to control up to 52 elec
trical functions (e.g. power seat functions, household
Light functions menu selectable: Further
devices through environment control functions).
submenus allow light functions to be
• The joystick is used to navigate within all menus and
turned on/off
submenus:
1) First movement to the right: Pick option
2) First movement to the front: Select option
B600 Ottobock | 57
Usage
58 | Ottobock B600
Usage
(not illustrated) Next action: Press the [Mode] button on Specified seat function selectable
the control panel repeatedly to return to
the Options menu
Favourites menu (menu colour = yellow)
• The Favourites menu can be used to quickly access Stored environment controls function (Hi-
those functions which are most important to the user. Fi in this case) selectable
• The functions can be assigned by the authorised per
sonnel according to the user's individual requirements.
• The joystick is used to navigate in this menu, as
described for the Options menu. > e.g. CD player Hi-Fi function
• Press the [Mode] button on the control panel to return to
the main menu.
Favourites menu (example)
Menu Option Further LCD display functions
First favourites function selectable Further information on the LCD monitor is covered in the fol
lowing chapters:
• "Usage" chapter > "Drive-away lock": Drive-away lock
• "Usage" chapter > "Power seat functions": see Page 41
• "Maintenance/Repair" chapter > "Troubleshooting": see
Page 82
B600 Ottobock | 59
Usage
Fig. 34 Attaching the attendant control 2 Battery capacity (LED indic 5 Selected power seat func
ator) tion (LED indicator)
Functional overview 3 Mode (LED indicator) 6 Joystick
The attendant uses the attendant control to operate the driv
ing function and the power seat functions. [On/Off] Button
The module is connected in conjunction with the control The button is used for switching the power wheelchair on,
panel or as a separate input device. activating the drive-away lock and switching the wheelchair
off.
60 | Ottobock B600
Usage
After the attendant control has been switched on, the LCD [Mode] Button
monitor on the control panel shows the following informa Switch between speed level 1 and 2 by pressing the button
tion: briefly.
Push and hold the button (at least 2 seconds) to switch the
Display Information
control unit to the power seat functions.
Attendant control activated
Mode (LED indicator)
The LED has 3 colour and various flash codes to indicate
the statuses of the speed level and system faults:
Battery Capacity (LED indicator)
The LED lights up when the unit is on. LED Information
Colour and flash codes provide information on the current Green is lit Speed level 1
battery capacity:
Orange is lit Speed level 2
LED Information Red is flashing Fault (see Page 87)
Green is lit Battery capacity > 70% Off LED indicator switched to
Orange is lit Battery capacity 30% – 70% seat function
Red is lit Battery capacity < 30% Selected Power Seat Function (LED indicator)
Red is flashing Battery deep discharge The electric seat functions are accessed by pressing and
Charge as soon as possible holding the "M" button (approx. 2 seconds).
Green is flashing Battery over-voltage (e.g. after driv The currently selected seat function is indicated on the con
ing downhill) trol panel display (see Page 41 ff.) and by the following
LEDs on the attendant control:
Continue driving slowly
Red/Orange/Green Charging process/Drive-away lock Display Information
flashing alternately Power back angle adjustment
B600 Ottobock | 61
Usage
62 | Ottobock B600
Usage
INFORMATION
Power footrest, left The function of the [Selected function up/down] buttons
can be programmed according to the user's wishes (but
ton [Selected function up] = function up or function down -
depending on programming).
Power footrest, right
In addition, there are three Piko buttons that can be connec
ted to the push-button module and positioned at will (see
Page 65).
The Piko buttons perform the same functions as the [Mode]
Power footrests, coupled button and the [Selected function up]/[Selected function
down] buttons (see Fig. 36, items 2 and 4). Symbols on the
back of the push-button module indicate the corresponding
functions.
Other special functions (combinations)
S1 – S5
B600 Ottobock | 63
Usage
64 | Ottobock B600
Usage
INFORMATION
For additional information on the user-specific adjustment
of this function: see inside front cover.
Power wheelchairs with enAble50 control units can be
equipped with optional two-way adapter cables.
• The connected Piko button can be used to control
power seat functions as well as other functions (see
inside front cover). These functions are specified when
the power wheelchair is ordered.
• Each Piko button switch is programmed with a so-called
Fig. 38 External odometer
toggle function. The selected function is activated as
long as the button is pressed. The selected function is 6.12 Additional options
activated in the opposite direction if the button is
released and pushed again. 6.12.1 Control panel holder
• For example, if the power back angle adjustment is Swing-away control panel holder
activated, the backrest tilts back as long as the button is The manufacturer offers the option of equipping the power
pressed the first time around. Activating this function wheelchair with a removable control panel mounted on a
again causes the backrest to tilt forward as long as the swing-away control panel holder. This control panel holder
button is pressed. makes it possible to drive the power wheelchair under a
6.11.6 External odometer table or closer to an object.
The power wheelchair can be equipped with an external The control panel holder can be rotated up to the armrest.
odometer. 1) Apply slight pressure to push the control panel holder to
It is connected to the control panel guard. the side.
Additional information on using it can be found in the manu → The pivot element is unlocked.
facturer's instructions for use.
B600 Ottobock | 65
Usage
6.12.2 Lights
The power wheelchair can be equipped with a light kit.
The warning flashers, the right and left direction indicators
Fig. 39 Swing-away control panel holder with removable con and the light are operated via the control panel.
trol panel
The light kit consists of two rear lights with integrated direc
Height-adjustable control panel holder tion indicators and two front lights, each consisting of a front
The power wheelchair can be equipped with a special con LED light and a direction indicator.
trol panel holder which allows for height adjustment of the The front lights are fastened to the self-contacting side pan
control panel. els (see Fig. 41, left). When the side panels are inserted
1) Loosen the mounting screws. into the side panel holders the contacts touch each other
2) Adjust the height of the control panel holder. and current can flow (see Fig. 41, right).
3) Tighten the mounting screw. To replace broken lamps: Replacing a defective bulb.
66 | Ottobock B600
Usage
► Ensure that the lap belt is not too tight against the
body.
► Remove objects or clothing which get caught.
The lap belt provides additional support and keeps the user
from sliding out of the seat.
Putting the lap belt on
> The user sits upright or lies in the power wheelchair.
1) Push the 2 halves together until the buckle engages with
an audible click.
2) Pull to check that it is secure.
→ The belt is put on.
Fig. 41 Front lights
CAUTION
Insufficient support of the seated person
Risk of falling out of the power wheelchair
► Always wear the safety belt / lap belt when driving in
public.
CAUTION
Putting the lap belt on incorrectly Fig. 42 Putting the lap belt on
Risk of pressure points, constriction
► Ensure that the buckle lies in the middle of the body.
B600 Ottobock | 67
Usage
CAUTION
Insufficient support of the seated person
Risk of falling out of the power wheelchair
► When driving in public areas, always wear the four-
point or chest belt for additional support.
► Under no circumstances may the belt system be used
as part of a restraint system for transportation in a
wheelchair accessible vehicle.
68 | Ottobock B600
Usage
CAUTION 3) Turn the buckle back to the original position when the
belt length is correct.
Putting the four point belt on incorrectly
4) To shorten: Pull on the free belt end.
Risk of pressure points, constriction
→ The belt length is adjusted.
► Ensure that the bottom belt is not too tight between the
lap belt and the thigh. 6.12.4 Suspension (steering casters/drive wheels)
► Ensure that the buckle lies in the middle of the body. The power wheelchair can be equipped with a suspension
► Ensure that the shoulder belt lies against the chest system.
equally on both sides and is not too tight. A spring and shock absorber element on each of the two
► Remove objects or clothing which get caught. steering casters increases driver comfort, especially on
uneven surfaces, and improves traction.
The power wheelchair may be equipped with a four-point or
The suspension effect is improved even more by a drive
chest belt.
wheel suspension.
The four-point or chest belt makes it possible to secure
patients in the power wheelchair.
Putting the four-point/chest belt on
> The user sits upright or lies in the power wheelchair.
1) Close all buckles so that they engage with an audible
click.
2) Pull to check that it is secure.
→ The belt is put on.
Adjusting the belt length
> The user sits upright or lies in the power wheelchair.
1) Close the belt.
2) To lengthen: Turn the length adjustment buckle by 90°
Fig. 44 Steering caster suspension
and pull.
B600 Ottobock | 69
Usage
70 | Ottobock B600
Usage
INFORMATION WARNING
You can find these and other optional add-on components Lifting the power wheelchair incorrectly
on the order form and in the wheelchair accessories cata Risk of falling, tipping, damage to the power wheelchair
logue. ► Only use sufficiently large hoisting devices to transport
the power wheelchair (see the "Technical Data"
The power wheelchair may be equipped with additional chapter for the weight of the power wheelchair).
options:
► Attendants may only lift the power wheelchair by solidly
• Curb climbing assist: To overcome curbs and steps with attached components. Footrests or armrests may not
a maximum height of 100 mm be used as lifting points.
• Puncture-proof tyres: Solid rubber tyres
• Seating shell adapter: To attach special seating shells;
control panel holder for seating shells also available
B600 Ottobock | 71
Usage
CAUTION
Securing the power wheelchair insufficiently during
transport
Fig. 48 Power wheelchair with reduced transportation size
Risk of pinching, crushing, blows to body parts
► During transportation in vehicles, on lifting platforms or Folding down the backrest without back angle
in lifts, turn the control unit of the power wheelchair off adjustment
and lock the brake. 1) Pull on the backrest release strap.
► The power wheelchair must be secured in accordance 2) Remove the side panels.
with the regulations for the transport device. 3) Pull the release strap back.
72 | Ottobock B600
Usage
B600 Ottobock | 73
Usage
3) Engage the brake. ► Always use the seats and restraint systems in the
4) Use the eyebolts and lashing straps to attach the power wheelchair accessible vehicle first. This is the only way
wheelchair to the means of transport. to provide optimal protection for the occupants in case
of accident.
► Never transport more than one person in the power
wheelchair.
► Use the power wheelchair in a wheelchair accessible
vehicle only if the seat is all the way down and the
backrest is in a vertical position.
WARNING
Use of the belt system as a restraint system in a
wheelchair accessible vehicle is forbidden
Risk of falling out of the power wheelchair, severe injury in
case of accident
Fig. 51 Front (left) and rear (right) eyebolts ► Under no circumstances may the belt system be used
as part of a restraint system for transportation in a
6.14 Use in a wheelchair accessible vehicle wheelchair accessible vehicle.
6.14.1 Safety Instructions ► Note that the belt system is only intended to help sup
port the user sitting in the power wheelchair.
WARNING
Use as a seat in a wheelchair accessible vehicle 6.14.2 Permitted use
Risk of falling out of the power wheelchair, severe injury in The power wheelchair may be used for transport in a wheel
case of accident chair accessible vehicle if a suitable restraint system is
used. The securing components (such as lap belts) sold by
the manufacturer only serve as additional restraints for the
person sitting in the power wheelchair.
74 | Ottobock B600
Usage
For more information, please refer to our brochure on using The weight of the person being transported is limited to
Ottobock products in wheelchair accessible vehicles, order max. 100 kg in a wheelchair accessible vehicle.
number 646D158.
6.14.5 Use
6.14.3 Restrictions for Use Ensure that the wheelchair is fully secured with lashing
straps for transport in a wheelchair accessible vehicle. For
WARNING more information please refer to our brochure on using
Unallowable use as a seat in a wheelchair accessible Ottobock products in wheelchair accessible vehicles, order
vehicle number 646D158.
Serious injuries due to use with unapproved accessory Straps can be attached via the eyebolts on the frame (see
combinations section 'Necessary accessories').
► The power wheelchair cannot be used as a seat in a Before transporting the power wheelchair switch off the con
wheelchair accessible vehicle with all equipment and trol unit and engage the brake.
accessory combinations. Observe the restrictions
described below. 6.15 Care
Use in a wheelchair accessible vehicle is not permissible if 6.15.1 Safety Instructions
the following options are used:
NOTICE
• Mechanical or power seat tilt 20°
Incorrect cleaning
• Recaro® n-Joy, Recaro® n-Joy-Plus or modular Recaro®
seat system Risk of damage to the product, especially to the electronics
• Combination of the following: ► Water must not come into direct contact with the elec
tronics, motor or battery under any circumstances.
– Standard seat, large, and seat height 45 cm
► Never use a water jet or high-pressure cleaning appar
– Contour seat, large, and seat height 52 cm atus to clean the product.
6.14.4 Necessary accessories ► Use a cloth or sponge for cleaning.
An anchor kit is required to use the power wheelchair as a ► To avoid corrosion, don't use any aggressive cleaning
seat in a wheelchair accessible vehicle. The qualified per agents or solvents.
sonnel who fit the wheelchair can provide more information.
B600 Ottobock | 75
Maintenance/Repair
76 | Ottobock B600
Maintenance/Repair
7.2 Maintenance
For the components, special attention must be paid to the
following points in the maintenance table below:
• Functionality of the components
• Correct adjustment of the components
• Damage, deformation
• Tightness of screw connections
B600 Ottobock | 77
Maintenance/Repair
78 | Ottobock B600
Maintenance/Repair
B600 Ottobock | 79
Maintenance/Repair
1 Cover open
2 Fuse inserted
Fig. 52 Pulling on the release bolt 3 Fuse holder
80 | Ottobock B600
Maintenance/Repair
NOTICE
Penetration of moisture
Risk of damage to the light
► During installation, ensure that the plates are seated Fig. 54 Front lights
accurately in the housing.
► Ensure that the screws are seated tightly against the 1 Notch (place screwdriver here)
plate. 2 Front LED light
B600 Ottobock | 81
Maintenance/Repair
Fig. 55 Replacing the front direction indicator bulb Fig. 56 Rear LED light (including rear direction indicator)
82 | Ottobock B600
Maintenance/Repair
INFORMATION
7.4.1 Types of notifications
In the event of communication problems in the control unit Warning
bus system, the system triggers an emergency stop in A warning indicates a status or malfunction of one or several
order to prevent any uncontrolled functions. components of the power wheelchair. The function of com
► Note that after every emergency stop, you have to turn ponents that have no errors is not restricted.
the power wheelchair control unit on again. For example, if the connection between the control unit and
► If the driving function is still not available after turning seat motor is faulty, this error will only be indicated if the
the control unit on again, activate pushing mode by user attempts to activate the motor. However, the driving
releasing the brake. function is still available.
► Contact a specialist dealer. Fault
Faults are indicated on the control panel LCD display via the A fault impairs one or several functions of the power wheel
"Battery Capacity" indicator, on the LCD monitor (if avail chair. The power wheelchair and its functions are not fully
able) or on the attendant control (if available). The following operational until the fault is resolved.
table shows the individual notifications as well as the associ
ated fault sources and possible causes and measures.
If the measures described here do not resolve the faults
completely, contact your specialist dealer. The specialist
dealer is able to read the exact error codes with a handheld
programming device and can perform a targeted system
analysis.
The control unit stores a list of all faults which occur. The
specialist dealer reads this information, for example during a
general overhaul of the power wheelchair. Based on the
saved data the specialist dealer determines future service
and maintenance intervals.
B600 Ottobock | 83
Maintenance/Repair
Joystick warning Joystick not in home posi Move the joystick to the home
tion when the unit is position before switching the unit
turned on on
84 | Ottobock B600
Maintenance/Repair
Display symbol LCD monitor Error/Warning Probable cause Possible corrective action
display
Communication error Faulty connection Check cabling/plug connections
(alternately flashing) between the hand-held Contact specialist dealer
control unit and the con
troller;
Defective cabling, soft
ware or hardware
Battery undervoltage Battery deep discharge Charge as soon as possible
Battery cable malfunction Check the connection to the bat
ing/faulty connection to tery (charge the battery if the
the battery connection is good)
Seat tilt motor fault Faulty cabling or plug Check cabling/plug connections
contacts Contact specialist dealer
Defective actuator
B600 Ottobock | 85
Maintenance/Repair
Display symbol LCD monitor Error/Warning Probable cause Possible corrective action
display
Seat height adjust Faulty cabling or plug Check cabling/plug connections
ment motor fault contacts Contact specialist dealer
Defective actuator
86 | Ottobock B600
Maintenance/Repair
B600 Ottobock | 87
Maintenance/Repair
88 | Ottobock B600
Disposal
B600 Ottobock | 89
Legal Information
90 | Ottobock B600
Appendices
10 Appendices
10.1 Technical data
General Information
Application class (according to DIN EN 12184) Class B
B600 Ottobock | 91
Appendices
92 | Ottobock B600
Appendices
Electrical system*
Batteries:
Gel (standard) 2 x 12 V; 63 Ah (C5)
AGM (optional) 2 x 12 V; 63 Ah (C5)
Lighting:
Front LED light 24 V, maintenance-free
Front direction indicator 10 W, 24 V
Rear LED light (including rear direction indic 24 V, maintenance-free
ator)
Fuse 120 A
Battery charger For more information see the included battery charger instructions for use.
* The product meets all requirements under ISO 7176-14.
Control unit
Model enAble50
Operating voltage 24 V DC
Max. output current per motor 130 A
Driving data
Speed 6 km/h or 10 km/h (see nameplate for precise information)
Maximum safe inclination Climbing ability, basic model*: 9.5° (17%)
Approved climbing ability with lowered seat height adjustment feature/seat
tilt: max. 6° (10%)
Maximum obstacle height 50 mm (100 mm with curb climbing assist)
Range (on level surfaces)** approx. 35 km
B600 Ottobock | 93
Appendices
Driving data
Braking distance (according to DIN EN for 6 km/h: 1000 mm (horizontal); 2000 mm (inclination)
12184:2009)*** for 10 km/h: 2100 mm (horizontal); 4200 mm (inclination)
Operating temperature -25°C to +50°C
Transport and storage temperature -40°C to +65°C
* Depending on the individual, the continuous climbing ability can be significantly lower than the value specified.
** The specified range was determined under defined conditions according to ISO 7176-4. In practice the range can be
reduced by up to 50%. For information on this, see the section "Range" in the instructions for use (user).
*** The braking distance can be correspondingly longer due to user weight, installed options and condition of the tyres, and
due to weather and surface conditions.
Corrosion protection
Corrosion protection Coated frame
94 | Ottobock B600
Kundenservice/Customer Service
Europe Africa
Otto Bock HealthCare Otto Bock France SNC Otto Bock Polska Sp. z o. o. Otto Bock Algérie E.U.R.L. Otto Bock de Mexico S.A. de C.V. Otto Bock Korea HealthCare Inc.
Deutschland GmbH 91978 Courtaboeuf Cedex 61-029 Poznań · Poland Mackle-Ben Aknoun · Alger C.P. 01180 México, D.F. · Mexico 137-070 Seoul · Korea
37115 Duderstadt · Germany France T +48 (0) 61 6538250 DZ Algérie T +52 (0) 55 5575 0290 T +82 (0) 2 577-3831
T +49 (0) 5527 848-3433 T +33 (0) 1 69188830 F +48 (0) 61 6538031 T +213 (0) 21 913863 F +52 (0) 55 5575 0234 F +82 (0) 2 577-3828
F +49 (0) 5527 848-1460 F +33 (0) 1 69071802 ottobock@ottobock.pl F +213 (0) 21 913863 info@ottobock.com.mx info@ottobockkorea.com
healthcare@ottobock.de information@ottobock.fr information@ottobock.fr
Otto Bock Romania srl Otto Bock HealthCare Otto Bock
Otto Bock Healthcare Otto Bock Healthcare plc 077405 Chitila, Jud. Ilfov Otto Bock Egypt S.A.E. Minneapolis, MN 55447 · USA South East Asia Co., Ltd.
Products GmbH Egham, Surrey TW20 0LD Romania Mohandessein - Giza · Egypt T +1 (0) 763 553 9464 Bangkok 10900 · Thailand
1070 Wien · Austria United Kingdom T +40 (0) 21 4363110 T +202 (0) 330 24 390 F +1 (0) 763 519 6153 T +66 (0) 2 930 3030
T +43 (0) 1 5269548 T +44 (0) 1784 744900 F +40 (0) 21 4363023 F +202 (0) 330 24 380 usa.customerservice F +66 (0) 2 930 3311
F +43 (0) 1 5267985 F +44 (0) 1784 744901 info@ottobock.ro info@ottobock.com.eg @ottobockus.com obsea@otttobock.co.th
vertrieb.austria@ottobock.com bockuk@ottobock.com
OOO Otto Bock Service Otto Bock South Africa (Pty) Ltd
Otto Bock Adria Sarajevo D.O.O. Otto Bock Hungária Kft. 143441 Moscow Johannesburg · South Africa
71000 Sarajevo 1135 Budapest · Hungary Region/Krasnogorskiy Rayon T +27 (0) 11 312 1255 Asia/Pacific Other countries
Bosnia-Herzegovina T +36 (0) 1 4511020 Russian Federation info-southafrica@ottobock.co.za Otto Bock Australia Pty. Ltd. Otto Bock HealthCare GmbH
T +387 (0) 33 766200 F +36 (0) 1 4511021 T +7 (0) 495 564 8360 Baulkham Hills NSW 2153 37115 Duderstadt · Germany
F +387 (0) 33 766201 info@ottobock.hu F +7 (0) 495 564 8363 Australia T +49 (0) 5527 848-1590
obadria@bih.net.ba
Otto Bock Adria d.o.o.
info@ottobock.ru Americas T +61 (0) 2 8818 2800 F +49 (0) 5527 848-1676
Otto Bock Bulgaria Ltd. 10431 Sveta Nedelja · Croatia Otto Bock Scandinavia AB Otto Bock Argentina S.A. F +61 (0) 2 8814 4500 reha-export@ottobock.de
1612 Sofia · Bulgaria T +385 (0) 1 3361 544 60114 Norrköping · Sweden CP 1426 Ciudad Autônoma de healthcare@ottobock.com.au
T +359 (0) 2 80 57 980 F +385 (0) 1 3365 986 T +46 (0) 11 280600 Buenos Aires · Argentina Beijing Otto Bock
F +359 (0) 2 80 57 982 ottobockadria@ottobock.hr F +46 (0) 11 312005 T +54 (0) 11 4706-2255 Orthopaedic Industries Co., Ltd.
info@ottobock.bg info@ottobock.se F +54 (0) 11 4788-3006 Beijing, 100015, P.R. China
Otto Bock Italia Srl Us
Otto Bock Suisse AG 40054 Budrio (BO) · Italy Otto Bock Slovakia s.r.o. atencionclientes@ottobock.com. T +8610 (0) 8598 6880
CH-6036 Dierikon T +39 (0) 051 692-4711 851 01 Bratislava 5 ar F +8610 (0) 8598 0040
T +41 (0) 41 455 61 71 F +39 (0) 051 692-4720 Slovak Republic Otto Bock do Brasil Ltda. news-service@ottobock.com.cn
F +41 (0) 41 455 61 70 info.italia@ottobock.com T +421 (0) 2 32 78 20 70 13051-030 Campinas-São Paulo Otto Bock Asia Pacific Ltd.
suisse@ottobock.com F +421 (0) 2 32 78 20 89 Brasil Wanchai, Hong Kong · China
Otto Bock Benelux B.V.
Otto Bock ČR s.r.o. info@ottobock.sk T +55 (0) 19 3729 3500 T +852 (0) 2598 9772
5692 AK Son en Breugel
33008 Zruč-Senec The Netherlands Otto Bock Sava d.o.o. F +55 (0) 19 3269 6061 F +852 (0) 2598 7886
Czech Republic T +31 (0) 499 474585 34000 Kragujevac ottobock@ottobock.com.br info@ottobock.com.hk
T +420 (0) 377825044 F +31 (0) 499 476250 Republika Srbija Otto Bock HealthCare Canada Otto Bock HealthCare India
F +420 (0) 377825036 info.benelux@ottobock.com T +381 (034) 351 671 Burlington, Ontario, L7L 5N5 Mumbai, 400071 · India
email@ottobock.cz F +381 (034) 351 671 Canada T +91 (0) 22 2520 1268
Industria Ortopédica
Otto Bock Iberica S.A. info@ottobock.rs T +1 (0) 289 288-4848 F +91 (0) 22 2520 1267
Otto Bock Unip. Lda.
28760 Tres Cantos (Madrid) 1050-161 Lisboa · Portugal Otto Bock Ortopedi ve F +1 (0) 289 288-4837 information@indiaottobock.com
Spain T +351 (0) 21 3535587 Rehabilitasyon Tekniği Ltd. Şti. infocanada@ottobock.com
Otto Bock Japan K. K.
T +34 (0) 91 8063000 F +351 (0) 21 3535590 34387 Mecidiyeköy-İstanbul Otto Bock HealthCare Tokyo, 108-0023 · Japan
F +34 (0) 91 8060415 ottobockportugal@mail.telepac.pt Turkey Andina Ltda. T +81 (0) 3 3798-2111
info@ottobock.es T +90 (0) 212 3565040 Bogotá · Colombia F +81 (0) 3 3798-2112
F +90 (0) 212 3566688 T +57 (0) 1 8619988 ottobock@ottobock.co.jp
info@ottobock.com.tr F +57 (0) 1 8619977
info@ottobock.com.co
Ihr Fachhändler | Your specialist dealer
© Ottobock · 647G968=EN-03-1309
Otto Bock Mobility Solutions GmbH
Lindenstraße 13 · 07426 Königsee-Rottenbach/Germany
T +49 (0) 69 9999 9393 · F +49 (0) 69 9999 9392
ccc@ottobock.com · www.ottobock.com
Ottobock has a certified Quality Management System in accordance with ISO 13485.
Template-Version: 2013-05-29