Professional Documents
Culture Documents
نظام السوفتنر لإزالة عسر المياه (softener) , (water softener) حل مشكلة خزان الملح - أجهزة عسر الماء - water treatment
نظام السوفتنر لإزالة عسر المياه (softener) , (water softener) حل مشكلة خزان الملح - أجهزة عسر الماء - water treatment
نظام السوفتنر لإزالة عسر المياه (softener) , (water softener) حل مشكلة خزان الملح - أجهزة عسر الماء - water treatment
البحث
نظام السوفتنر إلزالة عسر المياه ( ) water softener( , ) softenerحل مشكلة خزان الملح -أجهزة
عسر الماء water treatment -
المياهمشكلة خزان
ومواصفاتحل
) waterفحوصات
(softenerمعالجة ,المياه
specificmechanical.com مناقشات مهمة في
) softener Water
إلزالة عسر المياه ( نظامLife
السوفتنر
Specific Mechanical OPEN
-أجهزة عسر الماء water treatment - الملح
Systems
اليوم سوف نتحدث عن موضوع مهم جدا هذا الموضوع طرحه صاحب المشكلة على منتدى خبراء تكنولوجيا المياه
المشكلة التي يعاني منها ،امامنا صوره لتنك ملح يستخدم في تنشيط السوفتنر ،إلعادة السوفتنر الى وضعه الطبيعي عن
طريق التبادل االيوني مع ايونات الصوديوم الموجودة في الملح ،وهو عباره عن NaCL
مناقشات مهمة في معالجة المياه فحوصات ومواصفات المياه Water Life
الخزان الملحي يحتوي على مصفاه ،حسب تصميم نظام تنك
الملح
الخزان الملحي يحتوي على مصفاه ،حسب تصميم نظام تنك الملح
الخزان الملحي يحتوي على مصفاه ،حسب تصميم نظام تنك الملح يحتوي على خطين لسحب المحلول الملحي من تنك
الملح حديثه حيث كل خط يؤدي إلى السوفتنر المشكلة التي يعاني منها صاحب السوفتنر ،هو ارتفاع الملح في الماء
لمستوى عالي عند مرحله اعاده التعبئة .
المشكلة ان الماء يرتفع مستواه في تنك المحلول الملحي بشكل كبير عند اعاده تعبئه تنك الملح بالماء وقام بتغيير الراس
التحكم ،حيث توقع ان المشكلة من راس التحكم الموجود اعلى السوفتنر وبقيت المشكلة كما هي.
سوف نتعرف على اراء الخبراء والمشاركين في هذه المشكلة ،وفي نهاية مقطع الفيديو سوف نخرج في ملخص نهائي
حيث االستفادة الكبيرة ،وسوف تكون في نهاية مقطع الفيديو او نهاية المدونة .
ما هو نوع رأس التحكم الهد كونترول ،وهو من نوع ،Clackطلب كتالوج وموديل الهيد ،ليعرف االوقات التي يتحكم
بها راس التحكم ،حيث توقع المشكلة في زمن تعويض خزان الملح فيمكن ان يكون الزمن تعويض الملح عالي ،فطلب
منه تقليل الزمن تعويض خزان الملح وذلك من خالل راس التحكم بالضغط على تقليل الزمن التعويض ،وبالتالي سوف
يقوم بتعبئة الماء في زمن اقل .
فيمكن ان تكون محمله بالشوائب يجب تنظيفها ،او غير المصفاة حيث عمود سحب المحلول الملحي في نهايته يحتوي
على مصفاه ،تقوم بتنظيم مستوى المحلول الملحي وتمنع من سحب الهواء فيمكن الكره تعلق في داخل المصفاة ،او
المصفاة بحاجه لتغيير حيث عندما ال تغلق الكره بشكل جيد في داخل المصفاة ينفذ الماء من خاللها ويرتفع مستواه بشكل
عالي .
يجب تنزيلها حيث يحتوي خط السحب من االعلى على عوامه ،حيث اذا استمر ارتفاع الماء تصل الى العوامة تمنع من
ارتفاع الماء ،تستطيع ان تتحكم في كميه المياه عن طريق تغيير زمن مرحله اعاده التعبئة ،وذلك بإعادة ضبط زمن
اعاده تعبئه تنك الملح ،و ضبط مستوى العوامة الى المستوى الذي انت تريده وعندها ينتهي ضخ المياه في الخزان الملحي
.
هل بعد التنشيط السوفتنر يعمل لفترة توافق ما هو مصمم عليه ،و يدخل في طور االستنزاف ،اذا كان االمر كذلك يبقى
تقلل زمن الملء و ممكن تستخدم عوامة و فواشه مع طوافة لإلغالق ،و ليس كرة الن الكرة فقط للحماية من سحب
الهواء عند فراغ الخزان ،أما مع الطوافة لغلق المدخل عند مستوى معين لملء الماء.
وبكل األحوال األمر يحتاج منك لمعايرة زمنية و ادخال االزمنة الموافقة الى برنامج التشغيل ،و لكن عدم المساس بزمن
التنشيط اللي يوافق سحب كمية الملح المناسبة للتنشيط الن التنشيط يعتمد على كمية الملح وليس زمن التنشيط
الماء المسحوب للتنشيط كثير ..اي ان السحب قليل وبالتالي عند اعادة المليء يطفو الماء
السحب عندك قليل ،أو الضغط في التنشيط قليل ،او محتاج انجيكتور
يجب التأكد بوجود ملح باستمرار في داخل تنك الملح ،بمعنى عندما تلقي نظرة على تنك الملح تالحظ دائما يوجد ملح بهذه الطريقة تتأكد
ونصيحة إذا كان الملح متكتل في أسفل التنك أو متحجر أنصحك بإزالته وتنظيف تنك الملح جيدا ووضع ملح جديد .
خالصه الموضوع
وتتحكم بالزمن من خالل راس التحكم بان تقلل من زمن اعاده او تعبئه المحلول الملحي.
االنتباه لمنظم المستوى في داخل خزان الملح وذلك باالنتباه الى المصفاة واالنتباه الى العوامة .
االنتباه الى السوفتنر انه خالل التنشيط يسحب الكميه المناسبة من المحلول الملحي ،ألنه اذا سحب كميه قليله من المحلول الملحي فانه
) filter | (sand filterمشكلة في الفلتر الرملي the sandتسببت بانسداد جهاز تنقية المياه ro unit
المياه
water life77 الغسيل العكسي
فحوصات ومواصفات
comYour مهمةلوفيمازبط
معالجة المياه وتغسله
مناقشات Water
ممكن تنظف فلتر – كيفLife
الفلتر الرملي
Sand Filte
حل مشكلة خزان الملح أجهزة عسر الماء, softener نظام السوفتنر إلزالة عسر المياه
How does a Water Softener Work نظام السوفتنر | أجهزة عسر الماء والمبادل األيوني
…f examine the water of the softener - ) لمياه السوفتنرHardness( العسرهI فحص- طريقةI شرح
…etermination of hardness Test titration system() العسرة بنظام (المعايرةI فحص- طريقةI شرح
Today we will talk about a very important topic this topic put by the problem on the Forum of water technology experts
The problem is that we have a picture of salt slurry used to activate the softener, to restore the specter to normal by ion exchange with the salt ions found in
the salt, which is NaCL
The salt tank contains a matrix, according to the design of the salt trench system, which contains two lines to extract the saline solution from the salt trench,
.where each line leads to the suftner. The problem is that the salt is high in the water at a high level when re-packing
The process of activating the softener is the process of reverse washing, the activation process or the withdrawal of the brine solution, the slow washing
process, the rapid washing process. At the end of the activation stage, the salt tank is refilled for the next activation. The salt solution is soaked for 4 hours to
.5 hours to saturate The saline solution becomes saline solution above saturation, and is used again
The problem is that the water increases its level in the tincture of saline solution significantly when recharging the salt tink with water and changed the
.control head, where it is expected that the problem from the top of the control located above the suventner and remained the problem as it is
We will identify the opinions of experts and participants in this problem, and at the end of the video we will come out in a final summary where the big
.benefit will be at the end of the video or the end of the blog
:The comments of the colleagues in the comments were as follows
What is the type of Control Head Control, a Clack type, a catalog request and a hydraulics model, to know the times controlled by the control head, where the
problem is expected in the time of the salt tank compensation, the time can be high salt compensation. Through the control head by reducing the
.compensation time, and thus will fill the water in less time
One opinion is that there is hatred within the refinery attached inside
It can be loaded with impurities must be cleaned, or non-refinery where the column of the withdrawal of brine solution at the end contains a liquidator, which
regulates the level of salt solution and prevents the withdrawal of air can be attached to the inside of the filter, or the refinery need to change where when the
.ball does not close well Inside the refinery, the water runs through it and rises to a high level
One view is that the salt reservoir is raised
It should be downloaded where the tow line from the top contains a float. If the water level continues to reach the buoy, prevent the water from rising, you can
control the quantity of water by changing the re-fill time by resetting the salt fill time, Float to the level you want and then end up pumping water into the salt
.tank
:Mr. Thaer said
It is possible to draw the water to be activated less than the refillable water, and after several stimuli, you notice the high level of saltwater water ... Either you
fill the filling time in a practical way so that the filling is close to the drawing time of the activation ... or in the foyer especially where the raft with a plastic
column When the water rises to the level of the buoy, the column is pulled up and the plug fills the entry hole of the refilling water, and the total water
continues to pass to the service line even if it is refilling at the time of refilling the salt tank in some water Passes to the refill tube and into the main server
line, and some are a Another one does not pass. Of course, if you are a Hirofor on the feed pump, it stops automatically. Until the end of stage D and the entry
.of the server to the service
After the activation of the softener works for a period of compatibility of what is designed, and is in the process of attrition, if this is the case reduces the
filling time and possible to use the buoy and fowl with a raft to close, and not ball because the ball only to protect from the air when the vacuum tank, With
the raft to close the entrance at a certain level to fill the water
In any case you need to calibrate time and enter the times agreed to the driver, but not to affect the activation time that agrees to withdraw the amount of salt
suitable for activation because the activation depends on the amount of salt and not the activation time
Water Life
:One view
فحوصات ومواصفات المياه المياه
The water drawn معالجة
to activate في.. that
a lot مهمة مناقشات
the clouds are small and therefore when the re-fill the water floats
:Mr. Thaer asked
.How much is the amount of ricin
.How much is total water hardness
.How much is the output of the suvtner means the amount of water out of the suptner in the unit of time
All the answers give you the operating time of the user between two stimuli, and the amount of salt needed and on the basis of reducing the activation time,
.because the device shows you the ability to withdraw Fanchouri salt water
:The information for Svetner is
The quantity of the load in the vasel is 500 liters, the quantity of the intruder entering 160 ppm, and the maximum outage acceptable to the maximum 2 ppm
... The production of the sutnner 70 cubic meters per day, ie 9 cubic meters per hour ... Entrance and exit valve measuring 2 inches
Riyad Awad
@مرسلة بواسطة
. Water Life ???? ?? ???? ????? ????? ????
فحوصات ومواصفات المياه مناقشات مهمة في معالجة المياه
مناقشات مهمة في معالجة المياه
Water Life
تصميم وحدات المعالجة ,
آخر المشاركات
كيفية تغيير فالتر المياه المنزلي - عندي مشكلة بالفلتر الكربوني حل مشكلة التهريب في رأس
تغيير الفالتر المنزلية (شمعات الفلتر - - water filterالفلتر الكربوني قد التحكم ( ) HEAD CONTROL
خطوات الغسيل لوحدة التناضح العفن الفطري البكتيري على الموز- كيف تعمل فالتر المياه؟ ما هي
العكسي الـ –ROالغسيل الكيميائي التعفن األسود للموز (Bacterial فالتر المياه؟ مكونات فلتر المياه
تعليقات12 :
Unknown
اريد طريقه تصنيع فلتر الزيوليت الطبيعي فخاري يقوم بازاله عسر المياه ماهي طرق تصنيعه وماهي كميات
االضافات
Riyad Awad
مرحبا بك أخي :
العلم لي بطريقة تصنيع الرزن
كميات اإلضافة تعتمد على نسبة عسرة المياه التي عندك وكمية المياه الداخلة
smart
أزال أحد مشرفي المدونة هذا التعليق.
ابو صهيب
فحوصات ومواصفات المياه مناقشات مهمة في معالجة المياه Water Life
لدي سوفتنير موقف سنتين واريد اعادة تأهيل السوفتنير هل يلزم تغير الرزن في هذه الحاله
Riyad Awad
قم بعملية تنشيطه قبل إستخدامه وإفحص العسرة بعد التنشيط إذا أعطت اليوجد عسرة في الفحص
فهذا دليل على صالحيته
ابو صهيب
لدي سوفتنير موقف سنتين واريد اعادة تأهيل السوفتنير هل يلزم تغير الرزن في هذه الحاله
Unknown
احد عمودي الرزين يخرج عسر عالي بعد التنشيط ما هي المشكلة
Unknown
لدي مشكله ارتفاع العسره بعد 10ساعه بينما في السابق تظهر العسره بعد 14ساعه في السوفتنر
Unknown
تم تزويد رزن جديد لجهاز السوفتنر وبعد الغسيل ينتج مياه عشره هارد ما السبب
Unknown
كم يلزم اضافة حبيبات كلوريد الصوديوم الي الماء
Unknown
السالم عليكم لديه سوفتنر يخرج ماء مالح فما هوه السبب
غير معرف
السالم عليكم .انا محتاج اعرف عدد السوفتنرز المطلوب تركيبه مع العلم ان القساوة 17درجة فرنسية والمياه
المحاله المطلوبة يوميا هي m^3 100
وعدد ساعات العمل للمحطة 16ساعة
تحميل المزيد...
فحوصات ومواصفات المياه مناقشات مهمة في معالجة المياه Water
ًق
Life
أدخل تعلي ا