Professional Documents
Culture Documents
SixPack Manual WEB 08 2021
SixPack Manual WEB 08 2021
SixPack Manual WEB 08 2021
com ®
True to the Music
Workhorse
™
SixPack
™
User Guide
®
True to the Music
www.radialeng.com
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com
IMPORTANT SAFETY & USER NOTICE
FOR PROFESSIONAL USE ONLY
! !
Radial 500 series power racks are specifically designed for use by
qualified professional audio engineers. The open frame design is not
intended for use by consumers or those unfamiliar with this format.
Even though the current and voltage levels are relatively low, we
recommend that all slots be filled with a module or covers be placed
over unfilled slots. This will help protect you from electrical shock.
These power racks are designed to be used with 500 series modules
manufactured by Radial or others that follow the 500 series format.
Even though there is no formalized standard, Radial has endeavored
to take every step possible to ensure cross-brand compatibility. To this
end, Radial has produced a free PDF download called the Workhorse
Open Source Document (Whos.Doc) that outlines the mechanical
and electrical requirements for module designs. Manufacturers are
invited to consult this document in order to assist in assuring cross-
platform compatibility with both current and older 500 series formats.
Users should also consult this document and ensure the module
being used follows the prescribed pin-out configuration.
Congratulations and thank you for purchasing the Radial Workhorse SixPack, an innovative
six slot power rack designed for the 500 series modular format. This guide describes how to
install modules safely and maximize the use of the SixPack features. We recommend that
you sit back, have a coffee and take a few minutes to read it to familiarize yourself with the
many innovative features that are built in.
To make this guide as easy to understand as possible, we have divided it into several sections.
It begins with an overview, then descriptions of each function, ending with some real world
applications. Should you find yourself asking a question that is not addressed, we invite you
to view the SixPack FAQ page on our web site. This is where we post the latest hints and of
course questions from users. If you still do not find what you are looking for, feel free to send an
email to info@radialeng.com and we will do our best to answer your question in short order.
®
True to the Music
FEATURE SET
2 3 4 5 6 7
W
16V
®
True to the Music
INPUT 1 or 7 INPUT 4 or 8
INTRODUCTION
The SixPack is a 6 slot power rack designed for 500 series modules. It provides power to
the modules plus 48 volt phantom for mic preamps. Up to six modules may be used at any
one time. Radial modules and those that have been designed by other manufacturers to
take advantage of the Workhorse’s extra features will enjoy the added functionality of the
Omniport™.
6Following 5 series
OMNIPORT 500 4 OMNIPORT
convention,
OMNIPORT 3
the XLR, OMNIPORT 2 OMNIPORT 1 OMNIPORT
+16VDC
balanced +4dB linewww.radialeng.com
level signal.
GND
PIN DIAGRAM - PANEL VIEW
16VDC BASIC SIGNAL FLOW -
-
13
-
-
-
-
- G
-
1+ 2
+
3
G
4
+
5
G
6
+
7
G
8
+
OUTPUTS 1~8
This flow chart shows the basic signal routing for slots one throughINPUTS 1~8
six. The signal comes
G G + G + G +
INPUT
INPUT
into the SixPack via the rear panel female XLR, ¼" TRS or D-Sub inputs and is routed to the
INPUT
module via the 15-pin card-edge receptacle. Once the signal is processed by the module, the
signal is output via the male XLR, ¼" TRS or D-Sub outputs.
INPUTS 1~8
INPUTS 1~8
INPUTS 1~8
OUTPUT
OUTPUT
OUTPUT
FXLR MXLR
INPUT
INPUT OUTPUT
OUTPUT
CARD-SLOT
TRS INPUT
OUTPUT
TRS
(ONE OF SIX)
INPUTS 1~8
D-SUB INPUTS 1~8
OUTPUTS D-SUB
OUTPUTS 1~8
1~8
INPUTS
OUTPUT1~8 OUTPUTS 1~8
OUTPUT
OMNIPORT
OMNIPORT
OUTPUT
OMNIPORT
OUTPUT
OUTPUT
OUTPUT
OUTPUTS 1~8
OMNIPORT
®
True to the Music
FEED SWITCH
With older 500 series racks, connections between modules were done using an XLR patch
cable whereby the output from one module would plug into the input of another. The SixPack
simplifies the process by introducing a FEED switch on each card-slot. This switch connects
the balanced output of one module into the adjacent module, eliminating the need for patch
cables.
CARD SLOT 3 CARD SLOT 2 CARD SLOT 1 CARD SLOT 3 CARD SLOT 2 CARD SLOT 1 CARD SLOT 3 CARD SLOT 2 CARD SLOT 1
INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT
FEED FEED FEED FEED FEED FEED
INPUT-3
OUTPUT OUTPUT OUTPUT
INPUT-2
OUTPUT OUTPUT OUTPUT
INPUT-1
OUTPUT OUTPUT OUTPUT
LINK LINK LINK LINK LINK LINK
FEED FEED
OFF OFF OFF OFF OFF OFF
3 2 1 3 2 1 3 2 1
CARD SLOT
OUTPUT INPUT 3 CARD SLOT
OUTPUT INPUT 2 CARD SLOT
OUTPUT INPUT 1OUTPUT
CARD SLOT
INPUT 3 CARD SLOT
OUTPUT INPUT 2 CARD SLOT
OUTPUT INPUT 1OUTPUT
CARD SLOT
INPUT 3 CARD SLOT
OUTPUT INPUT 2 CARD SLOT
OUTPUT INPUT 1
CARD-SLOT FEED
3
INPUT INPUT
FEED
INPUT
CARD-SLOT 2FEED
INPUT INPUT
FEED
INPUT
CARD-SLOT 1FEED
INPUT INPUT
FEED
INPUT
3 2 1 3 2 1 3 2 1
OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT
The FEED switch lets you daisy chain a series of adjacent modules to create a customized
channel strip whereby a mic preamp feeds an EQ, which in turn could feed a compressor.
Changing the order is simply a matter of relocating the modules or patching using an XLR
or TRS cable.
CARD-SLOT 4 CARD-SLOT
CARD-SLOT
4 3 CARD-SLOT
CARD-SLOT
3 2 CARD-SLOT
CARD-SLOT
2 1 CARD-SLOT 1
INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT
FEED FEED FEED FEED FEED FEED FEED FEED
4 4 3 3 2 2 1 1
POWE
UNPACKING THE SIXPACK
OMNIPORT
It is recommended that you save all packaging. Inside you will find the power supply, power
cable suitable for your region and a handle. The handle may be attached to the side or the
top using two screws and two washers as shown below.
10
OUTPUT INPUT
PHANTOM POWER
A second LED indicator will illuminate to tell you that 48V phantom is present. Phantom
power is only sent to the modules when the supply connection to the 15-pin card slot is
made. This will normally only be found on preamp modules that employ 48V phantom. Other
modules will not be affected and will simply ignore the phantom power as if it were not there.
POWER SHARING
The power supply produces 1600 milliamps (mA) of current that is shared between the card-
slots. So for instance, if you have power-hungry tube preamps in slots 1 thru 4 that require
250 milliamps of current each, you still have 600 milliamps of current left to power the other
card-slots. Considering most 500 series modules use between 40 and 130 milliamps of
current, it is unlikely you will ever exceed the SixPack’s available power.
Slide your modules into a slot until the 15-pin card-edge mates with the rear plane connector
and push firmly. Once inserted, secure the module in place using the supplied Phillips 4/40
machine screws. To prevent damage to the frame do not over tighten the screws. After the
module is inserted, it will automatically route the signal from the rear panel connectors to and
from the module.
+4dB MIXER 4
0dB NOMINAL
-20dB ACOUSTIC 2
-50dB MIC / DI 1
1. MIC LEVEL RANGE: Microphones and direct boxes produce the weakest
signals. These typically range from -60dB to -40dB. Some such as ribbon
microphones can be as low as -70dB while condenser mics will generally be
at the topMIC
end/ DI
of thisPREAMP
range. WithMIX-BUSS
a SixPack, one
MAIN
would RECORD
connect a microphone
to a preamp like the PowerPre™.
-50dB -10dB This-10dB
would elevate
+4dB the mic-level signal to
BUSS BUSS
produce a +4dB line-level +4dB signal at the XLR output.
DIRECT OUT
2. INSTRUMENT LEVEL RANGE: The +4dB output
DIRECT OUTlevels produced by instruments
can range widely. A single coil electric bass guitar can produce as little as
-40dB while an+4dB
RECORD electronic
EQ keyboard,
-10dB
ECHO sampler
-10dB
or -10dB
LIMITER digital piano is capable of
RECORD
the JDV™ amplify the+4dBsignal to produce a +4dB signal level at the XLR output
for direct recording.
3. UNBALANCED -10dB LINE LEVEL RANGE: Unbalanced outputs from CD
players, keyboards, mixers and home hi-fi components are usually specified
at -10dB and are often referred to as consumer line-level. These normally
connect to a preamp input or a line level module. If too loud, one simply
engages a pad.
4. BALANCED +4dB LINE LEVEL RANGE: This is the professional line level
that comes from a recording system and is normally the level that connects
in and out of EQs, compressors and so on. Most 500 series modules receive
and produce a +4dB signal level.
Matching the output level of one device to the input of the next will help you avoid distortion
and maximize signal-to-noise. For instance, using a +4dB output to drive a -10dB input could
overload the input and cause distortion. Conversely, a -10dB output may not have enough
gain to drive the input of a +4dB device resulting in a higher noise floor.
Because each of the SixPack slots is equipped with both XLR and ¼" TRS balanced input
and output connectors, you are pretty much free to interconnect modules or route signals to
other devices as you like. Once you start working with the SixPack, you will quickly come to
understand all of the capabilities and how easy it is to use.
MAKING CONNECTIONS
As a precaution, turn down levels before making connections. This will avoid the loud on-
off transient that can damage equipment or blow speakers. After you have some modules
installed you can connect the 5-pin XLR power supply cable. The SixPack will instantly power
on and the front panel LED indicators will illuminate.
1 1 1
OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT
Workhorse ACK
SIX-PACK
The SixPack is equipped with D-sub input and output connectors 13 wired+ to the
+ TASCAM™
+ +
- G 2 - G4 - G 6 - G 8
pin-out standard for easy patching to workstations. These carry G81 channels
- G 3 - ofG 5audio
- G 7back
-
+ + + +
and forth between your workstation and the SixPack. Once connected, D-sub channels 1
thru 6 are automatically routed to the six card-slot inputs and outputs. D-sub channels 7 and 48V
8 are routed to the ¼" TRS and female XLR convenience jacks on the front and rear panels.
16V
INPUT 1 or 7 INPUT 4 or 8
G
4 8 1 7 CARD SLOT 6 CARD SLOT 5
FEED
CARD SLOT 4
FEED FEED
CARD SLOT 3 CARD SLOT 2
FEED FEED
CARD SLOT 1
- 1
+
-
F M F M ON ON ON ON ON
G
OFF OFF OFF OFF OFF
2
+
G
-
F F OUTPUT LINK OUTPUT OUTPUT LINK OUTPUT OUTPUT LINK OUTPUT
3
ON ON ON
M M
+
8 7 6
OFF
5 4
OFF
3 2 1
OFF
- G
OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT
4
+
G
- 5
OUTPUT OUTPUT
FROM DB25 INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT
www.radialeng.com ®
6
- G
+
+16VDC
GND
PIN DIAGRAM - PANEL VIEW
G
-
-16VDC 13 + + + +
- - - -
7
G G G G
1+ -
2 3 4- 5 -6 7 -8
OUTPUTS 1~8 G G + G + G + INPUTS 1~8
+
8
- G
+
AUDIO INTERFACE
INPUTS 1 ~ 8 OUTPUTS 1~8
Using the old system, you would connect the microphone to the mic preamp using a standard
XLR cable. The mic preamp output would then connect to the EQ which in turn would connect
to the limiter. The direct XLR output from the limiter would then be sent to the recording
system.
COMPRESSOR EQUALIZER MIC-PRE
CARD SLOT 1 CARD SLOT 1 CARD SLOT 1
INPUT INPUT INPUT
FEED FEED FEED
1 1 1
OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT
The SixPack simplifies the process with a FEED switch that replaces inter-module patch
cables. Instead of using an XLR cable, you simply push the FEED switch into the UP position
and it routes the signal to the adjoining module’s input working from left to right (front view).
Because the FEED function is tied to the XLR connector, it will work with both Radial modules
and older 500 series modules.
FEED
INPUT
FEED FEED
INPUT
FEED FEED
INPUT
1 1 1
OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT
Once you get started, you will soon find all kinds of new and exciting ways to patch modules.
You could, for instance, use the FEED switch to connect one module into the next while using
a TRS cable to simultaneously patch the signal to a third module.
COMPRESSOR EQ MIC-PRE
CARD SLOT 1 CARD SLOT 1 CARD SLOT 1
FEED
INPUT
FEED
INPUT
FEED FEED
INPUT
1 1 1
OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT
INPUT 4 or 8
ACK
Workhorse
Routing the front inputs to modules 1 & 4
CARD SLOT 1
OMNIPORT
OUTPUT
INPUT
TM
OUTPUT
48V
16V
4 8 1 7
FEED
LINK
INPUTS 1~8
OFF
OFF
routing the front channel 7 and 8 conveinence jack to slots 1 and
1
ON
ON
TM
Workhorse ACK
SIX-PACK
CARD SLOT 2
4. This lets you add an EQ to slots 2 and 5 and a compressor to
OMNIPORT
OUTPUT
INPUT
F M F M
slots 3 and 6 to create a stereo ‘strip of dreams’. The outputs of
TM
Workhorse
OUTPUT
ACK
SIX-PACK
FEED
OFF
2
ON
the modules can be connected to the workstation using the XLR,
+
8 -
CARD SLOT 3
G
OMNIPORT
+
OUTPUT
7
-
INPUT
G
TRS or D-sub connectors.
+
6 -
G
+
5
-
G
+
4 -
G
4 8 1 7
+
OUTPUT
3
-
G
+
TM
FEED
LINK
48V
1+ 2-
OFF
3
OFF
Workhorse
ON
ON
ACK
SIX-PACK
-
G
13
16V
CARD SLOT 4
OMNIPORT
OUTPUT
INPUT
INPUT 1 or 7 INPUT 4 or 8
CARD F M F M
TM
48V
Workhorse ACK
SIX-PACK
www.radialeng.com
16V
SLOT 4 8 1 7
OUTPUT
FEED
OUTPUTS 1~8
OFF
4
ON
INPUT 1 or 7 INPUT 4 or 8
1-3
CARD
CARD SLOT 5
OMNIPORT
OUTPUT
INPUT
SLOT 48V
F
D-SUB M F M
4 7&8
CHANNELS 8 1 7
4-6 OUTPUT
16V
FEED
LINK
OFF
OFF
5
ON
ON
GND
CARD SLOT 6
OMNIPORT
CARD SLOT 5 CARD SLOT 4 CARD SLOT 3 CARD SLOT 2 CARD SLOT 1
F M F M
OUTPUT
16V
FEED FEED FEED FEED FEED
CARD-SLOT
ON ON ON ON ON
INPUT 1 or 7 INPUT 4 or 8
4 8 1 7
OUTPUT
CARD SLOT 5 CARD SLOT 4 CARD SLOT 3 CARD SLOT 2 CARD SLOT 1
OUTPUTS
6
+16VDC
ON ON ON ON ON
M
7
M
SPLIT VOLTAGE POWER SUPPLY
F F M
ON ON ON
-16VDC
FROM DB25 INPUT
5
OUTPUT
4
OUTPUT
3
OUTPUT
Routing
M
8
ON ON ON
OMNIPORT OMNIPORT OMNIPORT 8 OMNIPORT 7 OMNIPORT
4 1 CARD SLOT 6 CARD SLOT 5 CARD SLOT 4 CARD SLOT 3 CARD SLOT 2 CARD SLOT 1
OUTPUT
M
FEED FEED FEED FEED FEED
F F M
You can also2 choose1 to route the front female XLR inputs to male
F M F M ON ON ON ON ON
OFF OFF OFF
8
F
4
5 4 3
F
OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT
4 8 1 7
TM
TM
Workhorse
ACK
ACK
XLR outputs on the rear panel. This option lets you patch into a
SIX-PACK
SIX-PACK
TM
Workhorse
Workhorse
M
ACK
ACK
F F M
SIX-PACK
SIX-PACK
4 8 1 7
OFF OFF OFF
13 + + + +
-F F
- - - - OUTPUT
5
OUTPUT OUTPUT
3
OUTPUT OUTPUT
1
G G
4-
G G
LINK LINK LINK OUTPUT
8
1+ -
2 3 5 6 7 -8
OUTPUTS 1~8 G G + G + G + INPUTS 1~8 ON ON ON
® M M OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT
www.radialeng.com
F M F M
- - - - GOUTPUT OUTPUT
6 5 4 3 2 1
G G G
4-
8 7
1+ -
2 3 5 -6 7 -8
OUTPUTS 1~8 G G + G + G + FROM DB25 INPUT INPUTS 1~8
OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT
OMNIPORT
48V OMNIPORT OMNIPORT
48V OMNIPORT OMNIPORT OMNIPORT
SPLIT VOLTAGE POWER SUPPLY
16V 16V
4 8 1 7
OUTPUT OUTPUT
FROM DB25 INPUT INPUT 1 or 7INPUT
OUTPUT INPUTOUTPUT
4 or 8 INPUT INPUT 1 or 7INPUT
OUTPUT INPUTOUTPUT
4 or 8 INPUT ® OUTPUT INPUT OUTPUT INPUT
48V www.radialeng.com 48V
SPLIT VOLTAGE POWER SUPPLY+16VDC
GND
F M F M
16V 16V PIN DIAGRAM - PANEL VIEW
-16VDC 13 + + + +
STEREO
- - - -
XLR
G G G G
1+ -
2 3 4- 5 -6 7 -8
OUTPUTS 1~8 G G + G + G + INPUTS 1~8
INPUT 1 or 7 INPUT 4 or 8 INPUT 1 or 7
www.radialeng.com INPUT 4 or 8 ®
GND
PIN DIAGRAM - PANEL VIEW
-16VDC 13 + + + +
- G - G
4-
- G - G
1+ -
2 3 5 -6 7 -8
OUTPUTS 1~8 G G + G + G + INPUTS 1~8
F M F M
INPUT 4 or 8
ACK
4 6
OT 8CARD
OFF
1 SLOT 57
OFF
Workhorse
4
CARD SLOT 6
OFF
OFF
CARD SLOT
CARD SLOT 53
OFF
OFF
CARD SLOT 4
2
OFF
OFF
CARD
CARD SLOT
SLOT 31 CARD SLOT 2
OFF OFF
CARD SLOT 1
CARD SLOT 1
F M F M
INPUT
ON ON ON
ON ON
ON ON
ON ON ON
F OUTPUT
TM
16V
You can route42the front inputs to D-sub channels 7 and 8 and patch
FEED
LINK
INPUTS 1~8
OFF
OFF
1
ON
ON
OFF OFF
OFF OFF
OFF OFF
F OUTPUT
6
PUT
5M 7 4
OUTPUT
OUTPUT
53
OUTPUT
OUTPUT OUTPUT
OUTPUT
3
1
OUTPUT
OUTPUT
2
OUTPUT
1
LINK LINK
LINK LINK
LINK LINK OUTPUT
8 ON ON
ON ON
ON ON
4 8 1 7
TM
OMNIPORT
OUTPUT
INPUT
OFF OFF
OFF OFF
OFF OFF
4panel 53switches
42 as shown 2to route
1 the front inputs to the D-sub
OUTPUT OUTPUT
8
UT FROM
5 7
DB25 INPUT
OUTPUT INPUT
6
OUTPUT
OUTPUT INPUT
INPUT
3
1 OUTPUT
OUTPUT INPUT
INPUT OUTPUT
OUTPUT INPUT
INPUT OUTPUT
OUTPUT INPUT
INPUT OUTPUT INPUT OUTPUT INPUT
M
TM
F F M
PORT OMNIPORT OMNIPORT
OMNIPORT OMNIPORT
OMNIPORT OMNIPORT
OMNIPORT OMNIPORT
OMNIPORT OMNIPORT OMNIPORT
OUTPUT
4 Workhorse ACK
SIX-PACK
FEED
2
ON
OUTPUT OUTPUT
8 -
CARD SLOT 3
G
OMNIPORT
®
www.radialeng.com www.radialeng.com
7
-
INPUT
G
+
GND GND
5
-
G
card-slots.
G
-16VDC 13 + + + + 13 + + + +
+
- - - - - - - -
OUTPUT
G G G G G G G G
-
1+ -
2 3 4- 5 -6 7 -8 1 -2 3 4- 5 -6 7 -8
G
OUTPUTS 1~8 G G + G
OUTPUTS
+ + 1~8 G
INPUTS 1~8
+ G G + G + G + INPUTS 1~8
+
FEED
LINK
1+ 2 -
® ®
OFF
48V
3
www.radialeng.com www.radialeng.com
OFF
ON
ON
4 8 1 7
-
G
+16VDC
13
16V
GND GND
PIN DIAGRAM - PANEL VIEW PIN DIAGRAM - PANEL VIEW
CARD SLOT 4
OMNIPORT
-16VDC 13 + + + + 13 + + + +
OUTPUT
- G - G - G - G - G - G - G - G
INPUT
1+ -
2 3 4- 5 -6 -8 -2 3 4- 5 -6 -8
OUTPUTS 1~8 G G + G
OUTPUTS
+ + 1~8 G
7
INPUTS 1~8
+ G
1 G + G + G
7
+ INPUTS 1~8 INPUT 1 or 7 INPUT 4 or 8
48V
F M F M
www.radialeng.com
16V
OUTPUT
STEREO
FEED
OUTPUTS 1~8
OFF
ON
INPUT 1 or 7 INPUT 4 or 8
MIC PREAMP
CARD SLOT 5
OMNIPORT
OUTPUT
INPUT
OUTPUT
FEED
LINK
4 8 1 7
OFF
OFF
5
ON
ON
CHANNELS 7&8
CARD SLOT 6
FXLR INPUTS
OMNIPORT
4 8 1 7 CARD SLOT 6 CARD SLOT 5 CARD SLOT 4 CARD SLOT 3 CARD SLOT 2 CARD SLOT 1
OUTPUT
INPUT
4 8 1 7
6
CARD SLOT 6 CARD SLOT 5 CARD SLOT 4 CARD SLOT 3 CARD SLOT 2 CARD SLOT 1
OFF OFF OFF OFF OFF
FEED FEED FEED FEED FEED
M
+16VDC
F M F M
M
ON ON ON ON ON
7
ER SUPPLY
ON ON ON
-16VDC
M M
5 INPUT
F
TM
Workhorse ACK
SIX-PACK
®
True to the Music
FEED
ON Average current:......................266 mA per slot
FEED
ON
FEED
ON
FEED
ON
FEED
ON
TM
OFF OFF OFF OFF OFF
Ground connections:...............Chassis
Workhorse ACK
SIX-PACK
OUTPUT LINK OUTPUT OUTPUT LINK OUTPUT OUTPUT LINK OUTPUT
ON
XLR pin wiring:........................AES standard: pin-1 ground, pin-2 (+), pin-3 (-)
ON ON
OFF
D-sub pin-out:..........................Follows Tascam D-sub standard OFF OFF
48V
®
www.radialeng.com CARD SLOT 3 CARD SLOT 2 CARD
CARD
SLOT
SLOT
3 1 CARD SLOT 2 CARD SLOT 1
INPUT
FEED
INPUT
INPUT 1 or 7
FEED
INPUTFEED
INPUT
INPUT 4 or 8 INPUT
FEED
INPUT
GND
PIN DIAGRAM - PANEL VIEW
13 + + + + OFF OFF OFF OFF
- G - G
4-
- G - G
1+ -
2 3 5 -6 7 -8
OUTPUTS 1~8 G G + G + G + INPUTS 1~8 OUTPUT OUTPUT OUTPUT
OUTPUT OUTPUT OUTPUT
LINK LINK LINK LINK
3 2 31 2 1
OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT
OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT
TRS OUTPUT-7 TRS OUTPUT-8
FRONT FRONT
INPUT-1
CARD SLOT 3
INPUT INPUT
INPUT-2
CARD SLOT 2CARD SLOT
CARD
3 SLOT 1CARD SLOT 2CARD SLOT
INPUT INPUT
CARD
INPUT
INPUT-3
3 SLOT 1CARD SLOT 2
CARD SLOT
INPUT
CARD
3 SLOT CARD
INPUT
1 SLOT 2CARD SLOT
CARD
3 SLOT 1CARD SLOT 2CARD SLOT
CARD
INPUT
INPUT-4
3 SLOT 1CARD SLOT 2
INPUT INPUT INPUT
INPUT-5
INPUT INPUT INPUT
INPUT-6
INPUT INPUT INPUT
INPUT-1/7
CARD
CARD
SLOT SLOT
3
INPUTINPUT
1 CARD SLOT 2
INPUT
INPUT-4/8
CARD
CARD
SLOT
SLOT
INPUT
3 1
INPUT
CARD SLOT 2
INPUT
CARD SLOT 1
INPUT
FEED FEED FEED FEED FEED FEED FEED FEED FEED FEED FEED FEED FEED FEED FEED FEED
FRONT
PANEL
4 OFF 8 1 OFF 7
OFF CARDOFF
SLOT 6
OFF CARD
OFFSLOTOFF
5 CARD
OFF SLOT
OFF 4 CARD
OFF SLOT
OFF 3 CARD
OFF SLOTOFF2 JACKSCARD
OFF SLOT 1 OFF OFF
OUTPUT
LINK
OUTPUT OUTPUT
LINK
OUTPUT
LINK
OUTPUT OUTPUT
LINK
OUTPUT
LINK FEED
OUTPUT OUTPUT
LINK
OUTPUT
LINK FEED
OUTPUT OUTPUT
LINK
OUTPUT
LINK
OUTPUT
FEED OUTPUT
LINK
OUTPUT
LINK
OUTPUT
FEEDLINK OUTPUT
OUTPUT
LINK FEED
OUTPUT
LINK
OUTPUT
OUTPUT
LINK
OUTPUT
LINK
OUTPUT
F M F M ON ON ON ON ON
1/7 SWITCH
OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT
OMNIPORT
4/8 SWITCH
CARD SLOT 3 OMNIPORTCARD SLOT OMNIPORT
2CARD SLOT
CARD
OMNIPORT
3 SLOT OMNIPORT
1CARD SLOT 2 CARD SLOT
OMNIPORT
INPUT INPUT INPUT INPUT INPUT INPU
OFF OFF OFF OFF OFF
3 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 31 2 31 2 1
FEED FEED FEED FEED
M/F SWITCH
OUTPUT
F
INPUT OUTPUT INPUT
OUTPUT
F INPUT
OUTPUT INPUT
OUTPUT INPUT
OUTPUT INPUT
OUTPUT
OUTPUT
INPUT
OUTPUT INPUT
OUTPUT
LINK
INPUT
OUTPUT
OUTPUT
INPUT
OUTPUT INPUT
OUTPUT INPUT
OUTPUT INPUT
OUTPUT
OUTPUT INPUT
OUTPUT
LINK
INPUT
OUTPUT INPUT
OUTPUT
OUTPUT INPUT OUTPUTINPUTINPUT
OUTPUT
OUTPUT
OUTPUT INPUT
OFF OUTPUT
OUTPUT
LINK
INPUT
INPUT
OUTPUT
OFF OUTPUT OFF INPUT OUTPUT OFF INPUT
ON ON ON
CARD SLOT 3
M
CARD SLOT 2CARD SLOT
CARD
M
3 SLOT 1CARD SLOT 2CARD SLOT
CARD
3 SLOT 1CARD SLOT 2CARD SLOT
CARD
3 SLOT 1CARD SLOT 2CARD SLOT
CARD
3 SLOT 1CARD SLOT 2CARD SLOT
CARD
3 SLOT 1CARD SLOT 2 CARD SLOT 1
OUTPUT MXLR OUTPUT OUTPUT MXLR
OUTPUT OUTPUT OUTPU
LINK LINK LINK LINK
CARD-SLOT
INPUT 1
FEED
INPUTCARD-SLOT
INPUT
FEED
2
INPUT
FEED
INPUT CARD-SLOT
INPUT
FEED
3
INPUT
FEED
CARD-SLOT
INPUT INPUT
FEED
4
INPUT
FEED
CARD-SLOT
INPUT INPUT
FEED
5
INPUT
FEED
INPUTCARD-SLOT
INPUT
FEED
6
INPUT
FEED
INPUT
CARD
FEED SLOT 3
INPUT
CARD SLOT 2CARD SLOT
CARD
3 SLOT 1
CARD SLOT 2 CARD SLOT 1
INPUT INPUT INPUT INPUT INPUT INPUT
FEED FEED FEED FEED
OFF OFF OFF OFF
OFF OFF OFF
OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
6 5 4 3 2FXLR 1
OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPORT OMNIPO
8 7
OFF OFF OFF OFF
OUTPUT
LINK
OUTPUT OUTPUT
LINK
OUTPUT
LINK
OUTPUT
OMNIPORT
OUTPUT
LINK
OUTPUT
LINK
OUTPUT
OMNIPORT
OUTPUT
LINK
OUTPUT
LINK
OUTPUT OUTPUT
LINK OMNIPORT
OUTPUT
LINK
OUTPUT OUTPUT
LINK OMNIPORT
OUTPUT
LINK
OUTPUT
LINK 3
OMNIPORT
OUTPUT
OUTPUT
2 OUTPUT3
FXLR
OUTPUT
OMNIPORT
OUTPUT
1 OUTPUT
2 OUTPUT
1
LINK LINK LINK LINK
OUTPUT INPUT OUTPUT INPUT
OUTPUT INPUT
OUTPUT INPUT
OUTPUT INPUT OUTPUT INPUT
OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
D-SUBOMNIPORT
CH 7OFF D-SUB
OFF
CH 8OFF OFF
®
www.radialeng.com
+16VDC
GND
PIN DIAGRAM - PANEL VIEW
-16VDC 13 + + + +
- G - G
4-
- G - G
1+ -
2 3 5 -6 7 -8
OUTPUTS 1~8 G G + G + G + INPUTS 1~8
OUTPUT
OMNIPORT
Omniport™ is a special ¼" TRS jack located on the rear panel that has been left ‘open’
to allow the module to perform a unique task. In other words, depending on the type of
OUTPUT
module, the manufacturer can assign the Omniport to perform a function that may be most
appropriate. This could be a key input on a gate, a TRS effects loop or maybe an output. INPUT
As the Omniport function is determined by the module, you will need to consult the module
INPUT
INPUT
OMNIPORT
INPUTS
INPUTS 1~8
TRS 1~8
INPUTS 1~8
OUTPUT
OUTPUT
OUTPUT
FXLR MXLR
INPUT
INPUT OUTPUT
OUTPUT
INPUTS 1~8
D-SUB INPUTS 1~8
OUTPUTS 1~8
1~8 D-SUB
OUTPUTS
INPUTS
OUTPUT1~8 OUTPUTS 1~8
OUTPUT
OMNIPORT
OMNIPORT
OUTPUT
OMNIPORT
www.radialeng.com
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada
tel: 604-942-1001 • fax: 604-942-1010
info@radialeng.com • www.radialeng.com
Radial Workhorse™ SixPack™ User Guide - Part #R870 1263 00 / 08-2021
Specifications and appearance are subject to change without notice.