Professional Documents
Culture Documents
Graded Assignment: Unit Test, Part 2: Modeling With Geometry
Graded Assignment: Unit Test, Part 2: Modeling With Geometry
Graded Assignment: Unit Test, Part 2: Modeling With Geometry
Name: Date:
Graded Assignment
Unit Test, Part 2: Modeling with Geometry
Answer the questions below. When you are finished, submit this test to your teacher for full credit.
1. A box without a top is to be made from a rectangular piece of cardboard, with dimensions 8 in. by 10 in., by
cutting out square corners with side length x and folding up the sides.
(b) Use technology to estimate the value of x, to the nearest tenth, that gives the greatest volume. Explain
your process.
Answer:
2. A cube-shaped aquarium has edges that are 3 ft long. The aquarium is filled with water that has a density of
.
(a) Should the aquarium be placed on a table that can support a maximum weight of 200 lb? Explain why or
why not.
(b) Would the density of the water change if the aquarium was only half full? Explain.
Answer:
3. Use the Fermi process to estimate the number of bricks needed to fill an empty bathtub. Assume a typical
brick has a length of 4 inches, a width of 2 inches and a height of 8 inches. A typical bathtub has a length of
60 inches, a height of 30 inches and a width of 18 inches. Show your work.
Answer: