Professional Documents
Culture Documents
Electric UPVC Ball Valve
Electric UPVC Ball Valve
for DN15-DN50
Introduction to
30NM electric actuator 1
2
7
8
◆ Strong corrosion resistance: environmentally friendly aluminum alloy shell, anodized Asynchronous
and polyester powder coating. Motor type Power cord length
motor
◆ Small size: delicate and beautiful, large torque.
◆ Reliable performance: key parts such as bearings and electrical components are Opening and
closing time Tor que:
imported famous brand products.
◆ Beautiful and generous: aluminum alloy die-casting outside, fine and smooth, and can
reduce electromagnetic interference. General pressure M ot or pow er
◆ Precision wear resistance: worm gear output shaft is forged with special alloy, with high
Electrical
strength and good wear resistance.
specifications
◆ Safety guarantee: it has passed ac1500v withstand voltage test and is a class F insulat-
ed motor with guaranteed safety.
Rotation angle
◆ Simple matching: single-phase power supply, simple external circuit, DC power supply.
◆ Protection device: double limit, overheating protection.
Ambient
◆ Anti corrosion and rust removal: stainless steel can be used for bracket, coupling and temperature
screw.
◆ Intelligent CNC: digital setting, digital setting, high accuracy, self diagnosis, one Protection grade
machine multi-function.
◆ Integration: the intelligent control module is highly integrated into the electric device
body, without external positioners.
Grey
Orange: signal common
active position signals (full open and full full close positions of the valve. Red terminal
Grey: full open signal
closed) are output. Red
Structure: with two intermediate
Black: full close signal
position switches.
The power lines of two or more electric devices cannot be connected in parallel, The power lines of two or more electric devices cannot be connected in parallel,
in other words, the same contact cannot be used to control several electric in other words, the same contact cannot be used to control several electric
devices, otherwise it will cause runaway and overheating damage of the motor, devices, otherwise it will cause runaway and overheating damage of the motor,
affecting the service life of the electric device. affecting the service life of the electric device.
A7
Function: The positive and negative Yellow
Function: regulating function, input +
poles of the DC power supply are
4-20mADC.1-5VDC or 0-10VDC, output IN Green
A6 reversed through the external circuit to
4-20mADC. CLS -
realize the opening and closing
C Green/Yellow: positive and negative pole reversing switching
B2 operations and output a group of
Structure: With control module and 1kΩ CLS N
valve control
passive contact (fully open, fully closed) Brown: full open signal Orange: signal common terminal
potentiometer Black: full close signal
L
B1 signals.
The power lines of two or more electric devices cannot be connected in parallel, The power lines of two or more electric devices cannot be connected in parallel,
in other words, the same contact cannot be used to control several electric in other words, the same contact cannot be used to control several electric
devices, Otherwise it will cause runaway and overheating damage of the motor, devices, Otherwise it will cause runaway and overheating damage of the motor,
affecting the service life of the electric device. affecting the service life of the electric device.
6
11深1
4-
M6 Off limit
Off signal
79.93
110.20
4-
M5
35
25
Open limit
Travel stop The micro switch
On signal
20.16
121
25 ◆ manually swing the valve to the fully open position through the actuator manual device, and check
35 whether the travel stop just presses the two microswitches at the lower part. The travel stop cannot
press the microswitches or does not press the microswitches. If this happens, loosen the travel stop
fixing screw, move the travel stop to press the microswitch, and fix the travel stop fixing screw when
FRONT VERTICAL 1 VERTICAL 2 BACK you hear two "clicks", Then power on to confirm whether the position of the switch in place is correct;
◆ manually turn the valve to the fully closed position, and check whether the travel stop just presses
the two microswitches above. If it does not press or exceeds the limit, refer to the fully closed steps
above for commissioning methods.
The indicator light is broken Replace the indicator Module signal flashing Module signal is unstable
The opening /
closing indicator Abnormal operation of signal switch Replace the signal switch
does not light
Improper adjustment of travel stop Readjust the travel stop
0
9
Introduction to
50NM-2000NM
electric actuator