Professional Documents
Culture Documents
BrightPhoton - PD - PDXXA0-B010-0XX0SA-XXXX-A-XXXX Spec V.03
BrightPhoton - PD - PDXXA0-B010-0XX0SA-XXXX-A-XXXX Spec V.03
BrightPhoton - PD - PDXXA0-B010-0XX0SA-XXXX-A-XXXX Spec V.03
PRODUCT IDENTIFY
Part Number Description
PDXXA0-B010-0XX0SA-XXXX-A Si PIN Photodiode, 400~1100nm/750-1000nm
CODE RULES
e.g. PDXXA0 – B010 – 0XX0 S A – XX XX -A-XX XX
① ② ③ ④⑤ ⑥ ⑦ ⑧ ⑨ ⑩
Length
Diameter
Chip size
Packaging type: XX
Substrate:XX= 03=Cu/Ag, 10=BT
Product classification, A=industrial
Detecting material, S=Si
Bandwidth (nm), 25=250, 70=700
Sensivity, 10nW
Wavelength, 400-1000/750-1000nm
Header, short form of Photodiode
Note:There may be some changes between sample and drawing, thus, the actual spec please refer to the sample
that you received. And if any question please contact us.
PD40A0-B010-0700SA-0302 PD75A0-B010-0250SA-0302
领先的 VCSEL 及光子器件供应商
The Leading Supplier in VCSELs & Photonic Devices
PD40A0-B010-0700SA-1022/PD75A0-B010-0250SA-1022
领先的 VCSEL 及光子器件供应商
The Leading Supplier in VCSELs & Photonic Devices
Note: Reflow soldering can be operated only one time. During the temperature ramp-up, no forces may
be exerted on the PD which could deform or damage them. After soldering completed, please also do
not process until the product temperature ramp down to room temperature.
Storage precautions
Our products were sealed by aluminum foil bag attaching packed desiccant, they are moisture
proof and anti-static. Please handle these gently to avoid damage. At the same time, please be ready
for storage and take some moisture-proof measures to keep PD away from dampness that may
causes reliability failure.
Before opening, PD must be saved for at least 90 days below 30℃ with 60% RH.
After opening, PD must be kept in an environment that temperature lower than 30℃ and
humidity lower than 60% RH and used up within 24 hours. When the storage humidity reaches and
exceeds 60%, the products must be dehumidified at 60 °C for more than 24 hours before use.
Others
1. Please use solder paste to cure the photodiode.
2. This PD can be only used in constant voltage and current.
3. Operating voltage and current, refer to the table in paragraph Ⅱ.
4. Please add a 0.02 s blowing action after locating the photodiode to the substrate.
Ⅶ. Revision History
Revision Date Description
V.00 2021/04/13 The preliminary version
领先的 VCSEL 及光子器件供应商
The Leading Supplier in VCSELs & Photonic Devices
V.01 2021/11/25 The first official edition
V.02 2021/12/08 Update 0302 package code
V.03 2022/08/11 Update rise/fall time
**BrightPhoton reserves the right to make modification at any time due to improved design from time to time,
the merit behind is in order to supply the best product possible.