Professional Documents
Culture Documents
45 V23cam-Nct0309
45 V23cam-Nct0309
45 V23cam-Nct0309
Ungrouping
9
9-1
AP100G CAM Operation Guide I NCT
9.1 Merge/Separate
[Sheet Layout] 9
AP100G CAM Operation Guide I NCT
All parts will be treated as one part when NC Program made in Sheet Grouping
Process and WinNEST are loaded. This function allows you to separate Ungrouping
part of sheet as one part. Also, more than two parts can be made as one
part.
9-2
3. Select parts to be separated.
● Hold left. mouse button and drag around parts.
● Also, more than many parts can be selected by clicking without holding shift
Tips key if [Condition setup]-[System]-[Confirm Continuous Addition] is checked.
9
AP100G CAM Operation Guide I NCT
Grouping
Ungrouping
4. Enter the part number for the part separated in [Separate Part
No.] in the [Separate] dialog box
● The name of the part exist on the sheet can not be used.
● To change the number of a jointed part to be separated, change the number in
NOTE
[Source Part No.].
5. Click [Apply].
6. To separate another part, repeat steps 3 and 4.
(To select another part, right click the mouse, click [Operation
Back], and then return to the step 2.)
7. To exit this function, click [Close].
9-3
9.1.2 Merge Parts
[Sheet Layout]-[Merge]
Merge two parts into one part. 9
AP100G CAM Operation Guide I NCT
Grouping
! Merged parts will be treated as one part on the report. If you want to
Caution Ungrouping
output parts as individual parts on the report, use [Sheet Layout] and
[Grouping].
⇒ Refer [4.3Grouping parts])
(⇒
9-4
4. Enter the part number for the merged part on [Merge Part N0.]
in the [Merge] dialog box.
● Clicking somewhere blank will make operation return to step3 9
● In the step 4, you can use same number in the "original part number 1" or
Tips
AP100G CAM Operation Guide I NCT
"original part number 2". However the name of the part exist on the sheet can Grouping
not be used. Ungrouping
5. Click [Apply].
6. To merge another parts, repeat steps 2 to 4.
7. To exit this function, click [Close].
9-5