Professional Documents
Culture Documents
Traditional Toddler Bed
Traditional Toddler Bed
Difficulty
Moderate
Provide your child with a stylish place to sleep with this highly approachable toddler bed. Featuring a pair of built in guard
rails, the low height of the bed design gives your little one more freedom to get in and out of bed safely.
Page 1 of 19
Tools Materials
Kreg Tools Wood Products
Table Saw
Sander
Jigsaw
Tape Measure
Page 2 of 19
Cut List & Parts
2 Vertical Headboard Posts , 2” X 2” X 28”
1 Rail For Slats To Rest On , 6’ X 2”x 4” Pine Board Cut In Half To Be 2 Pieces Measuring 6’x 2”x2”
Page 3 of 19
Page 4 of 19
Page 5 of 19
Directions
Prepare for frame cuts
1 Cut frame pieces for headboard and footboard
Page 6 of 19
Prepare for panel cuts
2 Cut pieces to make up panels for headboard/footboard
Page 7 of 19
Milling
3 Mill lumber for bed frame pieces
Page 8 of 19
Pocket holes
4 Join boards to make panels with pocket holes
Page 9 of 19
Sand
5 Sand all pieces thoroughly
Page 10 of 19
Create headboard/ footboard
6 Join 2x2 pieces to make the headboard and then insert panel and screw together & Join 2x2 pieces to make the footboard
and then insert panel and screw together
Page 11 of 19
Draw wing
7 Draw your wing into the side pieces and then cut it out
Page 12 of 19
Pocket holes
8 Add pocket holes to side pieces
Page 13 of 19
Slat support
9 Add slat support to the side pieces
Page 14 of 19
Join pieces
10 Join side pieces to headboard
Page 15 of 19
Join pieces
11 Join side pieces to footboard
Page 16 of 19
Create slats
12 Cut slats to fit bed and install
Page 17 of 19
Clear coat
13 Finish with a clear coat
Page 18 of 19
Finshed
14 Enjoy your new bed!
Page 19 of 19