Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.

0) 1

Address:
Postal address:
Phone:
Fax:
E-mail:
Homepage:

Mechanic:
Date: 01.03.2022
Car licence no:
VIN:
Mileage:
Vehicle: MAN - TGA - 2007

Fault codes
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 2

Diesel (Engine control - EDC7 Bosch)


DTC Description
No fault codes

No fault codes

609 - Engine CAN


- Signal missing or faulty
- Stored
Frequency counter 10
Priority 2

3077 - Immobiliser: No quantity due to vehicle management computer ID being 'not


ready' for too long
- Faulty
- Stored
Frequency counter 11
Priority 2

3063 - After-run not completed


- Too high
- Stored
Frequency counter 1
Priority 2

3751 - Highside output stage starter relay


- Short circuit to ground
- Stored
Frequency counter 2
Priority 2

94 - Fuel supply pressure


- Too low
- Intermittent
Frequency counter 3
Priority 2

3813 - Monitoring starter


- Too high
- Stored
Frequency counter 3
Priority 2

3821 - Byte monitoring CAN 3 (exhaust temperature, AdBlue fill level, AdBlue
temperature)
- Faulty
- Intermittent
Frequency counter 12
Priority 5
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 3

Brake (EBS - EBS 5 Knorr)


DTC Description
4330 - External sequential fault: External vehicle speed signal implausible
- faulty
- Stored
Frequency counter 15
Priority 5
Time 4:3
Date 11.08.2021
Mileage 1279348

4871 - External sequential fault: Time overrun or fault condition in communication with
EAC control unit (SA=0x03)
- faulty signal
- Stored
Frequency counter 4
Priority 5
Time 14:4
Date 09.01.2022
Mileage 1292690

4617 - Wheel sensor wheel 4: Connection cable damaged or sensor defective


- faulty
- Stored
Frequency counter 1
Priority 5
Time 8:12
Date 25.01.2022
Mileage 1294359

4862 - J1939 (driveline CAN): Time overrun or fault condition in communication with
engine control unit (SA=0x00)
- open circuit
- Stored
Frequency counter 12
Priority 5
Time 8:59
Date 18.02.2022
Mileage 1295548

1062 - Brake pad wear sensor signal wheel 3


- too low
- Permanent
Frequency counter 5
Priority 5
Time 7:7
Date 01.03.2022
Mileage 1295548

3515 - Request warning lamp brake pad wear


- faulty signal
- Permanent
Frequency counter 15
Priority 5
Time 8:27
Date 13.12.2017
Mileage 1132025
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 4

Brake (Retarder - Intarder ZF)


DTC Description
No fault codes

Instrument (Instrument - Stoneridge Highline)


DTC Description
8135 - Failure message tank info 1 (AdBlue fill level)

8135 - Failure message tank info 1 (AdBlue fill level)


- Signal missing or faulty
- Permanent
Frequency counter 14
Priority 5

8112 - Failure of EEC1 message (engine speed display)


- Signal missing or faulty
- Stored
Frequency counter 1
Priority 2

Instrument (Instrument - Stoneridge Highline) (after last fault code deletion)


DTC Description
8135 - Failure message tank info 1 (AdBlue fill level)
- Signal missing or faulty
- Permanent
Frequency counter 1
Priority 5

Instrument (ZBR2 (Central control unit) - Wabco)


DTC Description
3301 - Alternator tl. L
- Signal missing or faulty
- Permanent
Frequency counter 14
Priority 5

111 - Coolant level


- Open circuit
- Permanent
Frequency counter 2
Priority 5

4005 - Turn indicators, tractive unit, rear left


- Too low
- Stored
Frequency counter 14
Priority 5

4001 - Headlight low beam, left


- Signal missing or faulty
- Stored
Frequency counter 2
Priority 5
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 5

Instrument (ZBR2 (Central control unit) - Wabco)


DTC Description

3502 - Brake lamp tractive unit


- Too low
- Stored
Frequency counter 14
Priority 5

100 - Oil pressure


- Faulty signal
- Stored
Frequency counter 2
Priority 4

4027 - Fog lamp, left


- Open circuit
- Stored
Frequency counter 2
Priority 5

110 - Cooling water temperature


- Faulty signal
- Stored
Frequency counter 4
Priority 4

4021 - Auxiliary high beam; left


- Open circuit
- Stored
Frequency counter 1
Priority 5

4201 - Entry light and interior lighting, left


- Short circuit to ground
- Stored
Frequency counter 1
Priority 4

1088 - Pressure, pressure sensor - circuit 2


- Signal missing or faulty
- Stored
Frequency counter 10
Priority 8

1086 - Pressure, pressure sensor - circuit 3


- Too low
- Stored
Frequency counter 1
Priority 1

3402 - Flame glow plug current


- Open circuit
- Stored
Frequency counter 1
Priority 3
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 6

Climate (Auxiliary heating - Hydronic 24/30/35)


DTC Description
No fault codes

Climate (Climate control - SKG Behr)


DTC Description
3007 - Communication control element- control unit

Gearbox (Gearbox - Astronic ZF)


DTC Description
3171 - CAN data bus; electronic engine governor 1 from EDC, EEC1
- Faulty signal
- Stored
Frequency counter 0
Priority 3

92 - Current retarder torque


- Faulty signal
- Stored
Frequency counter 6
Priority 3

3026 - CAN data bus; engine configuration from the EDC, engine configuration
- Signal missing or faulty
- Stored
Frequency counter 6
Priority 3

190 - Engine speed


- Faulty signal
- Stored
Frequency counter 10
Priority 3

3119 - Clutch does not close / does not transmit torque


- Unknown fault symptom
- Stored
Frequency counter 6
Priority 1

3090 - ECU (communication controllers 1 + 2)


- Faulty
- Stored
Frequency counter 2
Priority 1

3117 - Clutch self-adjustment faulty


- Unknown fault symptom
- Stored
Frequency counter 1
Priority 1
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 7

Multifunction (FFR (Drive control) - VDO)


DTC Description
1231 - The engine CAN sends the bus-off signal (MESSAGE TIMEOUT)
- signal missing or faulty
- Stored
Frequency counter 14
Priority 2

3269 - Plausibility message 'Start engine' - input request engine start


- faulty signal
- Stored
Frequency counter 1
Priority 5

Suspension (Air Suspension - ECAS2 Wabco)


DTC Description
No fault codes

You might also like