Professional Documents
Culture Documents
Miele T 5206
Miele T 5206
Preparation of laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Changing a programme
To cancel a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adding or removing items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
To select a different programme during drying . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2
Contents
Installation
View from the front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
View from the rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Aligning the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Coin mechanism / Time counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Installation - venting
Fitting the exhaust ducting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Calculating the duct length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Installation examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Electrical connection TE 5206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3
Warning and safety instructions
Warning and safety instructions
The electrical safety of this ma-
Please read the operating instruc-
chine can only be guaranteed
tions before using the tumble dryer
when continuity is complete between
for the first time. They contain im-
the appliance and an effective earthing
portant information about the safety,
system which complies with local and
use and maintenance of the ma-
national regulations. It is most import-
chine. This way you will avoid the
ant that this basic safety requirement is
risk of accidents and damage to the
regularly tested by a qualified electri-
machine.
can.
Keep these operating instructions in
The manufacturer cannot be held re-
a safe place and ensure that new
sponsible for the consequences of an
users are familiar with the content.
inadequate earthing system (e.g. elec-
Pass them on to any future owner of
tric shock).
the machine.
Do not connect the machine to the
Correct use mains electricity supply by an ex-
tension lead. Extension leads do not
The tumble dryer is only intended guarantee the required safety of the
for drying fabrics which have been machine (e.g. danger or overheating).
washed in a water solution, marked on
the manufacturer’s wash care label as The machine is built in accordance
being suitable for tumble drying. with current safety requirements.
Any other applications may be dan- Unauthorised repairs could result in un-
gerous. The manufacturer is not liable foreseen dangers for the user, for
for damage resulting from improper which the manufacturer cannot accept
use or operation. responsibility. Repairs should only be
undertaken by a Miele approved engin-
Do not let small children play with the eer.
machine or its controls. Supervise its
use by the elderly or infirm. Faulty components must only be
exchanged for Miele original spare
parts. Only when these parts are fitted
Technical safety can the safety standards of the ma-
Before setting up the machine chine be guaranteed.
check it for any externally visible
damage. Do not install or use a dam-
aged machine.
Before connecting the machine,
ensure that the connection data on
the data plate (fusing, voltage and fre-
quency) matches the mains electricity
supply. If in any doubt, consult a quali-
fied electrician.
4
Warning and safety instructions
In the event of a fault or for clean- The exhaust air must not be
ing purposes, the machine is only vented into a chimney or vent flue
completely isolated from the electricity which is in use. Neither should it be
supply either when: connected to ducting which ventilates
rooms with fireplaces. It would be dan-
– it is switched off at the mains or
gerous if smoke or exhaust fumes were
– the mains fuse is withdrawn. drawn back into the room.
Adequate ventilation is essential, Always close the door after use.
especially where another ap- This way you will avoid the danger
pliance which also uses the room air of:
(e.g. gas, oil or coal fired heater, con-
– anyone sitting or leaning on the
tinuous flow or other water heater), is in-
door, which can cause the machine
stalled in the same or an adjacent
to tip up.
room. To ensure safe operation, and to
prevent gases being given off by these – children climbing onto or into the
appliances being drawn back into the dryer or hiding things in it.
room, an underpressure of 4 Pa is the
Do not install the machine in a
maximum permissible. Ventilation can
room where the temperature may
be maintained by air inlets which can-
drop below freezing. At very cold tem-
not be blocked, in windows, doors and
peratures the machine may be difficult
outside wall vents, or by an automatic
to start. Laundry will not dry, and the se-
window opening arrangement when the
quence indicator light ~ r Anti-
tumble dryer is switched on.
crease/End will flash to indicate a problem.
If in any doubt, the advice of a compe-
tent builder, or for gas, a "Corgi" regis-
tered installer (in the UK) must be
sought.
Vented dryers must be installed
with a suitable venting system. If
the machine is not correctly ducted it
will draw damp exhaust air back into
the drum, increasing running time and
energy consumption quite consider-
ably. If moist air is passed back into
the room this may lead to long-term
damage of walls.
5
Warning and safety instructions
6
Help to protect the environment
Help to protect the environment
Disposal of the packing Energy saving tips
material Make sure that your laundry is thor-
The transport and protective packing oughly spun before drying. You will
has been selected from materials save up to 30% energy and time if
which are environmentally friendly for laundry is spun at 1200 rpm instead
disposal and can normally be recycled. of at 600 rpm.
Rather than just throwing these ma- Load according to the optimum
terials away, please ensure they are of- amount of washing recommended
fered for recycling. for the programme being used.
Underloading is uneconomical. Over-
loading gives a poorer quality of
Disposal of your old machine drying and may cause unnecessary
Old machines contain materials which creasing.
can be reclaimed or recycled. Please
contact your dealer, your local waste To save energy and time:
collection centre or scrap merchant – make sure the room in which the
about potential recycling schemes. dryer is located is well ventilated.
– Make sure the fluff filter is clean be-
Ensure that the machine presents no fore using the dryer.
danger to children while being stored
for disposal. The vent ducting should be as short,
straight and smooth as possible. Ex-
pelled air is slowed down in the vent
duct due to friction against the inner
walls of the ducting, therefore the
shorter the duct and the smoother
the inner walls, the less friction oc-
curs which in turns saves drying time
and energy costs.
7
Guide to the machine
Guide to the machine
Control panel
Programme sequence
! Drying
ä Cool air
~ r Anti-crease/End
8
Guide to the machine
9
Preparation of laundry
Preparation of laundry
Wash care labels General notes
Woven and loopkit materials (e.g. T-
Before drying check the drying
Shirts, knitted garments) tend to shrink
symbol on the wash care label.
to varying extents depending on their
quality. This tendency is exaggerated
Significance of symbols:
by over-drying. When purchasing
q = Dry at normal temperature woven materials, it is advisable to take
their shrinkage properties into account.
r = Dry at low temperature
Starched laundry can be dried in the
s = Do not tumble dry tumble dryer. To achieve the usual fin-
If no symbol is featured dry at your own ish, double the amount of starch should
risk applying the following principles: be used.
Cottons and minimum iron items Minimum iron fabrics should be spun
should be dried at a normal tempera- briefly at the end of their wash pro-
ture using the appropriate programme gramme, or spun for 10 to 30 seconds
setting. if hand washed before they are dried.
Some fabrics tend to crease if over-
Delicate fabrics with the following
dried. These items should be given
wash care label r, e.g. acrylics should
only a short period in the dryer, and
be dried at a low temperature.
taken out slightly damp. Do not use the
B Minimum iron - 7 Normal+ pro-
The following fabrics should gramme for these fabrics.
not be dried in a tumble dryer: Minimum iron shirts in 100% cotton
Woollens and wool blends may crease during tumble drying de-
these fabrics tend to become matted pending on the quality of the weave.
and shrink. These should be dried using the Hand
iron 9 setting. In extreme cases drip
Items filled with down
dry on a coat hanger.
the fine fabric interior tends to shrink,
depending on the quality involved. Minimum iron fabrics tend to crease
more the greater the load. This is par-
Pure linen
ticulary the case with delicate fabrics.
should only be machine dried if speci-
The load should be reduced to 2 kg or
fied as suitable by the manufacturer on
if necessary to 1.5 kg.
the wash care label, as the surface of
the fabric may otherwise tend to New dark coloured garments should
roughen. be dried separately from light coloured
garments to avoid the danger of
colours running.
10
Programme chart
Programme chart
Programme Laundry / Fabric type max. Notes
load 1)
A COTTONS
1 Extra dry Multi-layered fabrics 6 kg To prevent shrinkage
which would not be do not select the 1
thoroughly dried using Extra dry programme
the 2 Normal+ for jerseywear.
programme.
2 Normal+ Mixed loads of cotton 6 kg
fabrics, e.g. Turkish
towelling and
jerseywear, i.e. single -
and multi - layer fabrics.
3 Normal Loads of similar cotton 6 kg Should certain items
(EN 61121) fabrics (jerseywear, still be slightly damp,
flannelette sheets, select the 1 Extra dry
Turkish towelling). or 2 Normal +
programmes
4 Hand iron r Cotton or linen fabrics, 6 kg -
e.g. table linen, 6 kg If fabrics are too damp
5 Hand iron rr bedding, starched
(EN 61121) for hand ironing, select
laundry, etc. the 4 Hand iron r
programme.
6 Machine iron Cotton or linen fabrics, 6 kg Laundry should be
also starched laundry, rolled up to prevent it
for machine ironing. from drying out until it
can be ironed.
1)
Weight of dry laundry
11
Programme chart
B MINIMUM IRON
7 Normal + Minimum iron items 3 kg With blended
made of synthetics or fabrics consisting of
blended fabrics, e.g. wool and
pullovers,dresses, synthetics, consult
trousers etc., which are the manufacturer’s
not dried adequately in instructions, as the
the 8 Normal wool component
programme. may cause the
8 Normal Minimum iron shirts, 3 kg fabric to become
(EN 61121) table cloths, etc., made matted.
of blended fabrics, e.g.
cotton/synthetics.
9 Hand iron Minimum iron shirts, 3 kg
table cloths, etc., made
of blended fabrics, e.g.
cotton/synthetics which
are still to be hand-
ironed.
C Timed drying
0 Cold air Items which are only to 6 kg -
be aired.
! Hot air Individual items, 6 kg -
e.g. towels.
1)
Weight of dry laundry
12
How to dry correctly
How to dry correctly
1 Prepare the laundry Do not overload the drum. Overload-
As far as possible, sort laundry for: ing can cause unnecessary wear
and tear to the laundry and give a
– the type of fibre or weave disappointing drying result.
– the degree of dryness required
See the programme chart for maximum
– similar size of items loads.
– the moisture content after spinning. Before closing the door check that
This will help towards achieving an the fluff filter is correctly positioned.
even drying result.
Fasten duvet covers etc. to prevent
small items from being rolled up in-
side them.
Do up zips and tie fabric belts and
apron strings.
13
How to dry correctly
Remember to empty the coin / Make sure that the drum is empty.
token box regularly, so that it does If items are left in the dryer, they
not become blocked. could be damaged by overdrying
when the dryer is next used.
For further information on operating the
dryer with a coin mechanism / time If laundry is not taken out of the dryer
counter see “Installation”. at the end of the programme the dryer
will commence an anti-crease phase,
4 Start a programme during which the drum rotates at timed
intervals to keep the laundry sus-
Press the Start h button. pended and reduce the risk of creas-
ing.
To save both energy and operation
time the fluff filter in the door should
be cleaned after every programme
(see “Cleaning and Care”).
Shut the door when you have fin-
ished. As a safety precaution do not
leave the door open when not in use.
14
Changing a programme
Changing a programme
To cancel a programme To select a different
Turn the programme selector switch programme during drying
to the r End position. Turn the programme selector to the
For safety reasons all programmes required programme.
where the residual moisture content is The new programme starts from the be-
monitored have a maximum running ginning.
time of 130 minutes, after which period
the heater elements are switched off
and the cooling down phase com-
mences.
15
Cleaning and care
Cleaning and care
Cleaning the fluff filters Push the cleaned filter back into the
door holder and close the door.
The fluff which occurs during drying
is collected in the fluff filters in the If there is a great deal of compacted
door and in the door opening. fluff on the filters, they can be
Clean the filters after every pro- cleaned under hot running water.
gramme to reduce drying time and
save energy.
Remove any fluff from the hollow part Replace the filter in the door, ensur-
of the door holder through the wide ing it is fitted the correct way round
slit at the bottom. in its holder.
16
Cleaning and care
17
Problem solving guide
Problem solving guide
What to do if . . . ?
With the help of the following notes minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
18
Problem solving guide
19
Problem solving guide
20
Problem solving guide
21
Problem solving guide
Service
In the event of any faults which cannot
be remedied, or if the machine is under
guarantee, please contact
– Your Miele Dealer or
– The nearest Miele Service
Department (see back cover for
address)
22
Installation
Installation
View from the front
23
Installation
24
Installation
The machine must be perfectly level to The machine must not be built
ensure safe and proper installation. under.
25
Installation - venting
Installation - venting
Fitting the exhaust ducting At the same time turn the cover cap
anti-clockwise.
The moist air produced during drying
has to be vented to the outside.
Vent socket
The dryer must only be operated In the same way remove the vent
when it is correctly fitted with ex- socket from the rear vent outlet.
haust ducting. Secure into the side outlet by turning
clockwise.
The exhaust connection may be
Close the rear outlet with the cover
made:
cap.
– to the rear of the machine (the ma-
chine is supplied as standard with
Avoid:
this connection point open) or
– very long exhaust systems
– to the left of the machine.
– too many corners
The side exhaust connection has a
cover cap. – tight corners.
These reduce efficiency and increase
Exhaust connection to the time and energy consumption.
side of the machine
Disconnect the machine from the
mains electricity supply.
26
Installation - venting
Important
Connection must not be made to a
flue used by gas or solid fuel boilers
or heaters.
27
Installation - venting
The shortest passage for the expelled Measure the actual duct length.
air is preferable, to ensure the tumble Establish the number of elbows or
dryer functions most efficiently. Ex- bends necessary, noting the type of
pelled air is slowed down in the vent bend, angle and radius involved
duct due to friction against the inner (see Table I).
walls of the duct, therefore the shorter
the duct and the smoother the inner Add the additional length factor as
walls, the less friction occurs. specified in Table I to the actual duct
length to give the effective duct
An elbow or bend creates more friction length.
than a straight duct. An additional duct
length factor should therefore be calcu- The appropriate duct length can
lated for each elbow or bend (see then be taken from Table II.
Table 1). This factor expresses the re- Note
sistance of the bend in terms of a Drying times and energy consumption
straight length of duct. remain unaltered for Ø100 mm ducting
The additional length factor is then up to a total length of 15 metres.
added to the actual duct length to give Longer ducting may lead to slight in-
the effective total duct length. creases in drying times and energy
consumption, but does not impair the
A larger duct diameter also helps to re- function of the machine, if the necess-
duce friction. The duct diameter should ary duct diameter is adhered to (see
therefore increase with increasing duct Table II).
length.
Table I
Type of bend Angle Radius R Additional duct
in mm length in metres
Flexible ducting (heat resistant) 90° 100 to 400 0.5
45° 100 to 400 0.3
Plain ducting (heat resistant) 90° 100 0.35
Plastic ducting (heat resistant) 90° 200 0.25
Elbow 2.3
Concertina bend 90° 200 0.7
Wall vent with grille or window vent kit 3.6
Wall vent kit with flap or window vent kit 1.25
Exhaust connection to the left 1.0
28
Installation - venting
Table II Example:
Side connection. . . . . . . . . . . . . 1.00 m
Overall duct Internal
Length (L) . . . . . . . . . . . . . . . . . 2.50 m
length diameter
Lower radius R = 400 mm . . . . . 0.50 m
0 - 15 m 100 mm Height (H) . . . . . . . . . . . . . . . . . 2,00 m
15 - 21 m 110 mm Upper radius R = 200 mm . . . . 0.50 m
21 - 34 m 120 mm Wall duct with
louvred vent. . . . . . . . . . . . . . . . 3.60 m
Flexible ducting has been used for the
10.10 m
following example. See Table I for addi-
tional duct length factors for other
types of ducting. Result:
A duct diameter of 100 mm is adequ-
ate, since the overall length is less than
the 15 metres specified in Table II.
29
Installation - venting
1. Wall pipe*
1. Louvre frame 2. Flexible foam gasket*
2. Wall pipe Fit the gasket to the connecting
3. Connecting piece piece on the wall pipe
4. Louvre grill and push the dryer up against the
5. Flap wall.
6. Wood screw
7. Wall plug
30
Installation - venting
Upward ducting via plastic vent duct- Upward ducting via flexible vent
ing* to wall vent* ducting* to exhaust flue
Adapter* required.
1. Plastic ducting
2. Adapter* between exhaust
outlet and plastic ducting
31
Installation - venting
1. Window vent*
2. Adapter for flexible ducting
Ø 100 mm
(Window vent fitted in plexiglass pane)
32
Electrical connection
Electrical connection
Electrical connection U.K. Important
All electrical work should be carried out The wires in the mains lead are col-
only by a suitably qualified and compe- oured in accordance with the following
tent person, in strict accordance with code:
national and local safety regulations. Green/yellow = earth
33
Electrical connection
34
Technical data
Technical data
Height 85.0 cm
(adjustable +1/-0.5 cm)
Width 59.5 cm
Depth (incl. distance from the wall) 70.0 cm
Weight 57 kg
Drum volume 126 litres
Capacity 6 kg dry weight
Voltage
Rated load
Fuse rating
Max. load bearing
} see data plate
in operation approx. 68 kg
Test certificates awarded Radio/TV suppression, (VDE in
Germany)
Noise level < 70 dB(A)
(according to 3. GSGV)
35
Alteration rights reserved/000 3200
This paper consists of cellulose which has been bleached without the use of chlorine.