Professional Documents
Culture Documents
Amada Hfa-400w (Exp)
Amada Hfa-400w (Exp)
1990
HORIZONTAL BANDSAW
HFA-400W(EXP)
PARTS LIST
12017 Ver.1
GENERAL INFORMATION INTRODUCTION
1. TABLE OF CONTENTS
* Specifications subject to change without notice.
a b c
* This parts list shows all of the parts used in your machine.
Please file this parts list for reference and refer to it when you order parts or
01 Machine Body(1)-1/2 02 Machine Body(1)-2/2
maintain the machine.
a Unit No.
b Unit Name
c Assembly drawings shown in the main text.
2. MAIN TEXT
A B C B D E F G H I A J
Unit No. 01
From serial No. 20110290 and after Machine Body (1)-1/2
index Parts Number Parts Name Drawing No. Type (Maker) Q'ty Note Rev. No.
1. Confirm whether the model name and No. on the serial plate of the machine Machine body
correspond to the numbers of the machines for which the parts list is effective. Drive wheel
Blade speed change device
2. Use the drawings in the Table of Contents to find the unit on which the part in Driven wheel
question is shown in greater detail. Blade guide
Hydraulic
3. Spread out the referred pages. Swing cylinder
Front vise cylinder
4. Use the drawings and corresponding lists to confirm the specs,etc. of the part in Wire brush
question. Coolant system
Work feed
5. When ordering,please supply the following information: Rear vise
(1) Machine Model Feed cylinder
(2) Serial No. Rear vise cylinder
(3) Parts No. Work tray
(4) Quantity Electric
Chip conveyor
Standard attachment
Standard accessory
Multi vise
Roller table
Roller stand
Vise pressure reducing valve
1200L work tray & work stopper
600L work stopper
Ver.1
This PARTS LIST is printed on recycled paper.