Professional Documents
Culture Documents
WAP2100-I Series
WAP2100-I Series
WAP2100-I
Series
1 BDCOM WAP2100-I
BDCOM WAP2100-ISeries
Series
Product Characteristics
Network Performance Enterprise-Level Application
BDCOM WAP2100-I Series Outdoor Wireless AP adopts BDCOM WAP2100-I Series Outdoor Wireless AP has
the latest Qualcomm chip and 802.11 a/b/g/n/ac MIMO the following functions: IEEE 802.11n/ac, flow control,
technique. Its transmission rate in the physical layer is QoS, fair access time, automatic terminal identifi-
up to 1750Mbps. It has been widely applied in cation, multiple SSIDs, dynamic power/rate regulation,
commercial blocks, squares, campuses, scenic spots, dynamic reception flexibility and fat or fit AP mode.
etc. WAP2100-I Series Outdoor Wireless AP is of high
throughput and can access to 200 users in maximum Combining with BDCOM AC, BDCOM WAP2100-I
and enables 60 users work concurrently. Series can realize automatic channel selection, power
adjustment, user and serviec load balance.
Flexible Installation Configuration
BDCOM WAP2100-I Series Outdoor AP supports
Professional Product Design
various installations, such as wall-mounted and BDCOM WAP2100-I Series Outdoor AP provides
derrick-mounted. WAP2100-I Series is characterized standard IP67 protection grade based on outdoor
by separated type, deciding the models of antennas conditions, possessing a complete set of water proof,
and hosts and their installations in different sites; dustproof and shockproof. All devices adopt
technical parts examined by rigid simulation test to
BDCOM WAP2100-I Series AP provides enough deal with harsh environmetnt. Besides, the
choices for network planning and projecting. humanization of the setup package is conducive to
installation and edployment.
Wireless Security
BDCOM WAP2100-I Series Outdoor Intelligent
Wireless AP supports WEP, WPA, WPA2, WPA-psk,
WPA2-psk, 802.11i, MAC, Web, 802.1x authentication,
illegal AP detection, blacklist and whitelist.
WAP2100-I23B
OUTDOOR INDOOR
10GE Fiber
Gigabit Fiber
Gigabit PoE
WAP2100-T22E
Ceiling-mounted Intelligent
Wireless AP
WAP2100-I22E-D
Outdoor Intelligent Wireless AP
IP67 protection Data Center
WAP2100-T22E
Ceiling-mounted Intelligent
Wireless AP
WAP2100-I22B
Outdoor Intelligent Wireless AP
IP67 protection
WAP2100-W22B
In-Wall Intelligent Wireless AP
BSR2900-10
High Performance Gateway
WAP2100-I22B Router
Outdoor Intelligent Wireless AP
WAP2100-W22B
IP67 protection
In-Wall Intelligent Wireless AP
WSC6100-X256
Carrier-level Wireless Access
Controller
Wireless parameters
802.11 a/b/g/n/ac 802.11 a/b/g/n/ac/wave2 802.11 a/b/g/n/ac
Standard MIMO 2*2/2*2 MIMO 2*2/2*2 MIMO 3*3/3*3
1167Mbps 1267Mbps 1750Mbps
150 user access 200 user access 200 user access
Best performance 60 users recommend 80 users recommend 80 users recommend
32 SSIDs 32 SSIDs 32 SSIDs
2.412-2.4835GHz 2.412-2.4835GHz 2.412-2.4835GHz
5.150-5.250GHz 5.150-5.250GHz 5.150-5.250GHz
Working frequency 5.250-5.350GHz 5.250-5.350GHz 5.250-5.350GHz
5.470-5.725GHz 5.470-5.725GHz 5.470-5.725GHz
5.745-5.825GHz 5.745-5.825GHz 5.745-5.825GHz
4N-K interfaces In-built Panel Antenna 6N-K interfaces
Antenna
External antenna H:65° / V: 30° / Gain:15dBi External antenna
Output power(dBm) 27 27 27
Appearance
Size(mm) 282×232×64 216×216×55 282×232×64
Chassis
Weight(kg) 3.1 3.0 3.2
Size(mm) 505x365x110 353x337x140 505x365x110
Package
Weight(kg) 4.1 3.9 4.2
Power supply 802.3at PoE 802.3at PoE 802.3at PoE
Thunder-proof 6KV 6KV 6KV
Protection grade IP67 IP67 IP67
No-load(W) 7 7 7.5
consumption
Full-load(W) 24 20 24
Working temperature -40° C~70° C -40°C~70°C -40° C~70° C
5%~95% 5%~95% 5%~95%
Operating humidity
(non condensing) (non condensing) (non condensing)
Ordering Information
WAP2100-I22E-D BDCOM WAP2100-I22E-D Series Outdoor Intelligent Wireless AP (2 GE TX ports, 1 GE SFP port,
802.11 a/b/g/n/ac/wave2, 1267M wireless bandwidth, IP67 protection grade, POE power supply )
WAP2100-I22B BDCOM WAP2100-I22B Series Outdoor Intelligent Wireless AP (2 GE TX ports, 1 GE SFP port, 4*
NK interfaces, 802.11 a/b/g/n/ac, 1167M wireless bandwidth, IP67 protection grade, POE power
supply and antenna requiring additional purchase)
WAP2100-I23B BDCOM WAP2100-I23B Series Outdoor Intelligent Wireless AP (2 GE TX ports, 1 GE SFP port, 6*
NK interfaces, 802.11 a/b/g/n/ac, 1750M wireless bandwidth, IP67 protection grade, POE power
supply and antenna requiring additional purchase)
WAP-OANT-2458-N1 Universal omni-directional antenna(2.4G/5G dual-frequency, 6-8dBi gain, H360°/ V25 °, 1 *NJ
interface, maximum 4 antennas available to WAP2100-I22B, maximum 6 antennas available
to WAP2100-I23B)
Copyright © Shanghai Baud Data Communication Co., Ltd. 2019. All Rights Reserved.
This document is BDCOM Public Information. BDCOM reserves the right to alter, update and
otherwise change the information contained in the document from time to time.
www.bdcom.cn