Professional Documents
Culture Documents
2011 Bowen Fishing Tools Price Book
2011 Bowen Fishing Tools Price Book
2011 Bowen Fishing Tools Price Book
Contact Information
Corporate Headquarters
7909 Parkwood Circle Dr.
Houston, TX 77036
Phone: 713 375 3700
Fax: 713 346 4560
dht.customerservice@nov.com
Copyright 2011 National Oilwell DHT, L.P. Phone: 713 345 3700 dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 3 0001
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
TABLE OF CONTENTS
25 Service Charges A
50 Bowen Seal Rings A
75 Charges For Special Connections A
2100 Bowen Releasing Spear - Full Circle Type for Drillpipe and Tubing A
2300 Bowen Releasing Spear - Itco Type A
2710 Bowen Simplex Packer Retriever A
2800 Taper Taps A
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 3 0001
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
TABLE OF CONTENTS
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 3 0001
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
TABLE OF CONTENTS
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 1 0025
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
SERVICE CHARGES
*Charge for Magnet, Ditch, or Fishing Recharging is $72.00 per inch of O.D. - Fractional Inches Counted as a Whole
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 10 0050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
27 SEE 568 - SHEET 9-10 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19
NON-EXTRUSION RING
COPPER, 365 & 366 Price $22 $22 $22 $22 $23 $26 $26 $26 $26 $26
NON-EXTRUSION RING, STEEL
216, 385, & 2245 Price $29 $29 $29 $29 $29 $29 $29 $29 $29 $29
NON-EXTRUSION RING
NICKEL PLATED STEEL 46380 Price $31 $31 $31 $31 $31 $33 $33 $33 $33 $33
SEAL PROTECTOR, COPPER
375 Price $3.70 $3.70 $3.70 $3.70 $3.70 $4.80 $4.80 $4.80 $4.80 $4.80
SEAL PROTECTOR, RUBBER
227, 386, & 2246 Price $2.20 $2.20 $2.20 $2.20 $2.25 $2.35 $2.35 $2.35 $2.35 $2.35
SEAL PROTECTOR, TEFLON
82 & 2101 Price $2.55 $2.55 $2.55 $2.55 $3.60 $3.60 $4.25 $4.25 $4.25 $4.25
SETTING TOOL, O.D. RING
22729-NUMBER Price $145 $145 $154 $154 $168 $177 $177 $184 $197 $201
SETTING TOOL, I.D. RING
22709-NUMBER Price $145 $145 $154 $165 $168 $177 $178 $208 $197 $201
NOTES: This table is printed for convenient pricing of individual components of Seal Ring Assemblies.
For specifications, refer to Bowen Seal Ring Handbook.
Original Equipment Manufacturer - Discount 20%. Quantity discount available on request.
Special sizes quoted on request.
Low temperature O-rings are available for all sizes.
Prices Available on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 10 0050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
27 SEE 568 - SHEET 9-10 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39
NON-EXTRUSION RING,
COPPER 365 & 366 Price $26 $26 $26 $26 $26 $26 $26 $26 $26 $26
NON-EXTRUSION RING, STEEL
216, 385, & 2245 Price $31 $31 $31 $31 $31 $31 $31 $31 $31 $31
NON-EXTRUSION RING,
NICKEL PLATED STEEL 46380 Price $35 $35 $35 $35 $35 $35 $35 $35 $35 $35
SEAL PROTECTOR, COPPER
375 Price $5.35 $5.35 $5.35 $5.30 $5.30 $6.40 $6.40 $6.40 $6.40 $6.40
SEAL PROTECTOR, RUBBER
227, 386, & 2246 Price $3.55 $3.55 $3.55 $3.70 $3.70 $3.70 $3.70 $3.70 $3.70 $3.70
SEAL PROTECTOR, TEFLON
82 & 2101 Price $5.30 $5.30 $5.30 $6.30 $6.95 $6.95 $7.45 $7.45 $7.45 $8.10
SETTING TOOL, O.D. RING
22729-NUMBER Price $265 $265 $265 $272 $279 $288
SETTING TOOL, I.D. RING
22709-NUMBER Price $265 $265 $265 $272 $279 $325 $329 $307 $316 $323
NOTES: This table is printed for convenient pricing of individual components of Seal Ring Assemblies.
For specifications, refer to Bowen Seal Ring Handbook.
Original Equipment Manufacturer - Discount 20%. Quantity discount available on request.
Special sizes quoted on request.
Low temperature O-rings are available for all sizes.
Prices Available on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 10 0050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
27 SEE 568 - SHEET 9-10 -50 -51 -52 -53 -54 -55 -56 -57 -58 -59
NON-EXTRUSION RING,
COPPER 365 & 366 Price $26 $26 $29 $36 $33 $33 $33 $36 $36 $45
NON-EXTRUSION RING, STEEL
216, 385, & 2245 Price $36 $36 $36 $41 $41 $45 $45 $50 $50 $56
NON-EXTRUSION RING,
NICKEL PLATED STEEL 46380 Price $36 $36 $41 $41 $45 $50 $50 $56 $56 $61
SEAL PROTECTOR, COPPER
375 Price $9.80 $9.80 $11.50 $13.35 $14.10 $14.90 $15.55 $17.00 $18.50 $22.00
SEAL PROTECTOR, RUBBER
227, 386, & 2246 Price $8.65 $9.45 $10.65 $12.70 $13.40 $14.10 $14.75 $14.90 $15.10 $15.55
SEAL PROTECTOR, TEFLON
82 & 2101 Price $12.70 $14.10 $14.75 $16.60 $18.05 $19.30 $21 $21 $23 $25
SETTING TOOL, O.D. RING
22729-NUMBER Price
SETTING TOOL, I.D. RING
22709-NUMBER Price $387 $395 $408 $442 $454 $497 $503 $566 $543 $566
NOTES: This table is printed for convenient pricing of individual components of Seal Ring Assemblies.
For specifications, refer to Bowen Seal Ring Handbook.
Original Equipment Manufacturer - Discount 20%. Quantity discount available on request.
Special sizes quoted on request.
Low temperature O-rings are available for all sizes.
Prices Available on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 10 0050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
27 SEE 568 - SHEET 9-10 -70 -71 -72 -73 -74 -75 -76 -77 -78 -79
NON-EXTRUSION RING,
COPPER 365 & 366 Price $139 $139 $146 $149 $151 $154 $154 $162 $166 $181
NON-EXTRUSION RING, STEEL
216, 385, & 2245 Price $99 $104 $105 $108 $112 $122 $126 $129 $137 $139
NON-EXTRUSION RING,
NICKEL PLATED STEEL 46380 Price $122 $137 $139 $149 $151 $162 $166 $181 $191 $196
SEAL PROTECTOR, COPPER
375 Price $56 $56 $56 $56 $61 $61 $68 $68 $68 $68
SEAL PROTECTOR, RUBBER
227, 386, & 2246 Price $25 $26 $29 $29 $31 $31 $33 $36 $45 $45
SEAL PROTECTOR, TEFLON
82 & 2101 Price $36 $41 $45 $45 $50 $50 $56 $61 $81 $81
SETTING TOOL, O.D. RING
22729-NUMBER Price
SETTING TOOL, I.D. RING
22709-NUMBER Price $835 $871 $888 $930 $973 $1,007
NOTES: This table is printed for convenient pricing of individual components of Seal Ring Assemblies.
For specifications, refer to Bowen Seal Ring Handbook.
Original Equipment Manufacturer - Discount 20%. Quantity discount available on request.
Special sizes quoted on request.
Low temperature O-rings are available for all sizes.
Prices Available on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
5 10 0050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
NOTES: This table is printed for convenient pricing of individual components of Seal Ring Assemblies.
For specifications, refer to Bowen Seal Ring Handbook.
Original Equipment Manufacturer - Discount 20%. Quantity discount available on request.
Special sizes quoted on request.
Low temperature O-rings are available for all sizes.
Prices Available on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
6 10 0050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
30 - SEE 568 - SHEET 9-10 Price -11 -12 -13 -14 -15 -16 -17 -18 -19 -20
NON-EXTRUSION RING,
COPPER 370 & 371 Price $23 $24 $24 $25 $27 $27 $27 $27 $27 $27
NON-EXTRUSION RING, STEEL
250, 387, 2247, & 2249 Price $31 $31 $31 $31 $31 $31 $33 $33 $33 $33
NON-EXTRUSION RING,
NICKEL PLATED STEEL 53714 Price $33 $33 $33 $33 $33 $33 $33 $36 $36 $36
SEAL PROTECTOR, COPPER
376 Price $5.25 $5.60 $5.60 $7.30 $7.50 $8.10 $8.40 $8.40 $8.40 $8.65
SEAL PROTECTOR, RUBBER
388, 2248, & 2250 Price $3.70 $3.70 $3.70 $4.40 $4.40 $4.40 $5.30 $6.30 $7.45 $7.45
SEAL PROTECTOR, TEFLON
83 Price $7.45 $8.10 $8.10 $8.65 $9.00 $9.45 $9.80 $9.80 $9.80 $10.50
SETTING TOOL, O.D. RING -38 -39 -40 -41 -42 -43 -44 -45 -46 -47
22729-NUMBER Price
SETTING TOOL, I.D. RING -39 -40 -41 -42 -43 -44 -45 -46 -47 -48
22709-NUMBER PRICE $323 $332 $327 $379 $337 $354 $361 $376 $376 $382
NOTES: This table is printed for convenient pricing of individual components of Seal Ring Assemblies.
For specifications, refer to Bowen Seal Ring Handbook.
Original Equipment Manufacturer - Discount 20%. Quantity discount available on request.
Special sizes quoted on request.
Low temperature O-rings are available for all sizes.
Prices Available on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
7 10 0050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
30 - SEE 568 - SHEET 9-10 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40
NON-EXTRUSION RING,
COPPER 370 & 371 Price $36 $36 $41 $41 $45 $112 $122 $126 $126 $129
NON-EXTRUSION RING, STEEL
250, 387, 2247, & 2249 Price $50 $50 $56 $56 $61 $68 $75 $81 $83 $83
NON-EXTRUSION RING,
NICKEL PLATED STEEL 53714 Price $56 $56 $61 $68 $61 $68 $83 $83 $90 $99
SEAL PROTECTOR, COPPER
376 Price $16.95 $18.45 $19.45 $21.00 $21 $45 $45 $45 $50 $50
SEAL PROTECTOR, RUBBER
388, 2248, & 2250 Price $14.90 $15.05 $15.55 $16.95 $18.05 $19.30 $19.70 $21.00 $21.00 $21.00
SEAL PROTECTOR, TEFLON
83 Price $21.00 $21 $23 $25 $28 $29 $29 $31 $31 $33
SETTING TOOL, O.D. RING -57 -58 -59 -60 -61 -62 -64 -65 -66 -67
22729-NUMBER Price
SETTING TOOL, I.D. RING -59 -60 -61 -62 -63 -64 -65 -66 -67 -68
22709-NUMBER Price $566 $573 $604 $622 $642 $667 $647 $718 $741 $774
NOTES: This table is printed for convenient pricing of individual components of Seal Ring Assemblies.
For specifications, refer to Bowen Seal Ring Handbook.
Original Equipment Manufacturer - Discount 20%. Quantity discount available on request.
Special sizes quoted on request.
Low temperature O-rings are available for all sizes.
Prices Available on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
8 10 0050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
NOTES: This table is printed for convenient pricing of individual components of Seal Ring Assemblies.
For specifications, refer to Bowen Seal Ring Handbook.
Original Equipment Manufacturer - Discount 20%. Quantity discount available on request.
Special sizes quoted on request.
Low temperature O-rings are available for all sizes.
Prices Available on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
9 10 0050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
NOTES: This table is printed for convenient pricing of individual components of Seal Ring Assemblies.
For specifications, refer to Bowen Seal Ring Handbook.
Original Equipment Manufacturer - Discount 20%. Quantity discount available on request.
Special sizes quoted on request.
Low temperature O-rings are available for all sizes.
Prices Available on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
10 10 0050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
NOTES: This table is printed for convenient pricing of individual components of Seal Ring Assemblies.
For specifications, refer to Bowen Seal Ring Handbook.
Original Equipment Manufacturer - Discount 20%. Quantity discount available on request.
Special sizes quoted on request.
Low temperature O-rings are available for all sizes.
Prices Available on Request
O-RING CROSSOVER LIST
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 0075
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
TYPE CONNECTIONS
SIZE CONNECTION 2 3/8 2 7/8 3 1/2 4 4 1/2 4 3/4 5 5 1/2 5 3/4 6
A Price $408 $442 $460 $477 $510 $543 $618
B Price $312 $316 $357 $365 $367 $362 $437 $432
C Price $680 $756 $834
D Price $162 $164 $171
E Price $756 $834
F Price $142 $148 $148 $162 $164 $132
G Price $201 $144 $201 $166 $265
H Price $98 $117 $116 $128 $129 $144 $170
DESCRIPTION OF CONNECTIONS
A - Hydril F. J. P., Super F. J. and F. J. P.
B - Hydril F. J. W. P., Speed Tite
C - Triple Seal
D - X Line
E - Hydril E. U., Super E. U.
F - Buttress
G - B. O. T. F. J.
H - Bowen
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 10 0100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
ADDITIONAL CHARGES
Price
Boreback $200
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 1 1000
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
TABLE OF CONTENTS
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 3 1010
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
FS (Full Strength) - Engineered to withstand all pulling, jarring, & torsional strain.
SFS (Semi Full Strength) - Engineered to withstand all pulling strain.
SH (Slim Hole) - Engineered to withstand heavy pulling strain only.
For Top Subs, Bowls, or Guides left oversize, add 20% to the price for the first 1/4" or portion
thereof and an additional 10% for each additional 1/4" or portion thereof.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 3 1010
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
FS (Full Strength) - Engineered to withstand all pulling, jarring, & torsional strain.
SFS (Semi Full Strength) - Engineered to withstand all pulling strain.
SH (Slim Hole) - Engineered to withstand heavy pulling strain only.
For Top Subs, Bowls, or Guides left oversize, add 20% to the price for the first 1/4" or portion
thereof and an additional 10% for each additional 1/4" or portion thereof.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 3 1010
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
FS (Full Strength) - Engineered to withstand all pulling, jarring, & torsional strain.
SFS (Semi Full Strength) - Engineered to withstand all pulling strain.
SH (Slim Hole) - Engineered to withstand heavy pulling strain only.
For Top Subs, Bowls, or Guides left oversize, add 20% to the price for the first 1/4" or portion
thereof and an additional 10% for each additional 1/4" or portion thereof.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 1015
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Complete Assembly or Part Number
(2) Top Connection
(3) Size and Type of Fish to be caught
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 2 1020
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
FS (Full Strength) - Engineered to withstand all pulling, jarring, & torsional strain.
SFS (Semi Full Strength) - Engineered to withstand all pulling strain.
SH (Slim Hole) - Engineered to withstand heavy pulling strain only.
For Top Subs, Bowls, or Guides left oversize, add 20% to the price for the first 1/4" or portion
thereof and an additional 10% for each additional 1/4" or portion thereof.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 1020
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
FS (Full Strength) - Engineered to withstand all pulling, jarring, & torsional strain.
SFS (Semi Full Strength) - Engineered to withstand all pulling strain.
SH (Slim Hole) - Engineered to withstand heavy pulling strain only.
For Top Subs, Bowls, or Guides left oversize, add 20% to the price for the first 1/4" or portion
thereof and an additional 10% for each additional 1/4" or portion thereof.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 1070
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 1101
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
SPECIAL NOTES: (1) If Top Sub, Bowl, or Guide is left oversize, add 20% for the first 1/4" or portion
thereof and an additional 10% for each 1/4" or portion thereof.
(2) Special single Wicker Grapples to penetrate rubber and catch metal case, if specified
(3) Assembly 9357 has a 2 3/8" EUE Box and a 3 1/2" D.P. Pin Connection on Bowl
(4) Listed in catalog as Cable Head Overshots
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 5 1150
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part (2) Top Connection
(3) Size & Type of Fish to be caught (4) If O.D. other than Standard, please specify clearly
SPECIAL NOTES: (1) Top Sub, Bowl, or Guide is left undersized or oversized, add 20% for the first 1/4" or portion
thereof and an additional 10% for each additional 1/4" or portion thereof.
(2) For Basket Grapples with long catch stop, add 10% to Basket Grapple price.
(3) For Basket Grapples with short catch stop, add 25% to Basket Grapple price.
(4) For Basket Grapples with R.H. Wickers, add 20% to Basket Grapple price.
(5) For left hand overshot, add 20% to assembly and parts prices.
FS (Full Strength) - Engineered to withstand all pulling, torsional, and jarring strain.
XFS (Extra Full Strength) - Engineered for extreme abuse.
SFS (Semi Full Strength) - Engineered for special hole condition commensurate with maximum strength.
SH (Slim Hole) - Engineered to withstand heavy pulling strains only.
XSH (Extra Slim Hole) - Engineered for pick up jobs only.
RECOMMENDED SPARE PARTS: (1) Spiral - 3 Packers, 2 Grapples for each size, and 1 Control
(2) Basket - 2 Grapples, 2 Control Packers, or Mill Control Packers for each size
(3) Control Packer or Mill Control Packer - 3 inner, and Outer Seals
*Price Quoted on Request (Made to Order)
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 5 1150
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part (2) Top Connection
(3) Size & Type of Fish to be caught (4) If O.D. other than Standard, please specify clearly
SPECIAL NOTES: (1) Top Sub, Bowl, or Guide is left undersized or oversized, add 20% for the first 1/4" or portion
thereof and an additional 10% for each additional 1/4" or portion thereof.
(2) For Basket Grapples with long catch stop, add 10% to Basket Grapple price.
(3) For Basket Grapples with short catch stop, add 25% to Basket Grapple price.
(4) For Basket Grapples with R.H. Wickers, add 20% to Basket Grapple price.
(5) For left hand overshot, add 20% to assembly and parts prices.
FS (Full Strength) - Engineered to withstand all pulling, torsional, and jarring strain.
XFS (Extra Full Strength) - Engineered for extreme abuse.
SFS (Semi Full Strength) - Engineered for special hole condition commensurate with maximum strength.
SH (Slim Hole) - Engineered to withstand heavy pulling strains only.
XSH (Extra Slim Hole) - Engineered for pick up jobs only.
RECOMMENDED SPARE PARTS: (1) Spiral - 3 Packers, 2 Grapples for each size, and 1 Control
(2) Basket - 2 Grapples, 2 Control Packers, or Mill Control Packers for each size
(3) Control Packer or Mill Control Packer - 3 inner, and Outer Seals
*Price Quoted on Request (Made to Order)
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 5 1150
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part (2) Top Connection
(3) Size & Type of Fish to be caught (4) If O.D. other than Standard, please specify clearly
SPECIAL NOTES: (1) Top Sub, Bowl, or Guide is left undersized or oversized, add 20% for the first 1/4" or portion
thereof and an additional 10% for each additional 1/4" or portion thereof.
(2) For Basket Grapples with long catch stop, add 10% to Basket Grapple price.
(3) For Basket Grapples with short catch stop, add 25% to Basket Grapple price.
(4) For Basket Grapples with R.H. Wickers, add 20% to Basket Grapple price.
(5) For left hand overshot, add 20% to assembly and parts prices.
FS (Full Strength) - Engineered to withstand all pulling, torsional, and jarring strain.
XFS (Extra Full Strength) - Engineered for extreme abuse.
SFS (Semi Full Strength) - Engineered for special hole condition commensurate with maximum strength.
SH (Slim Hole) - Engineered to withstand heavy pulling strains only.
XSH (Extra Slim Hole) - Engineered for pick up jobs only.
RECOMMENDED SPARE PARTS: (1) Spiral - 3 Packers, 2 Grapples for each size, and 1 Control
(2) Basket - 2 Grapples, 2 Control Packers, or Mill Control Packers for each size
(3) Control Packer or Mill Control Packer - 3 inner, and Outer Seals
*Price Quoted on Request (Made to Order)
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 5 1150
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part (2) Top Connection
(3) Size & Type of Fish to be caught (4) If O.D. other than Standard, please specify clearly
SPECIAL NOTES: (1) Top Sub, Bowl, or Guide is left undersized or oversized, add 20% for the first 1/4" or portion
thereof and an additional 10% for each additional 1/4" or portion thereof.
(2) For Basket Grapples with long catch stop, add 10% to Basket Grapple price.
(3) For Basket Grapples with short catch stop, add 25% to Basket Grapple price.
(4) For Basket Grapples with R.H. Wickers, add 20% to Basket Grapple price.
(5) For left hand overshot, add 20% to assembly and parts prices.
FS (Full Strength) - Engineered to withstand all pulling, torsional, and jarring strain.
XFS (Extra Full Strength) - Engineered for extreme abuse.
SFS (Semi Full Strength) - Engineered for special hole condition commensurate with maximum strength.
SH (Slim Hole) - Engineered to withstand heavy pulling strains only.
XSH (Extra Slim Hole) - Engineered for pick up jobs only.
RECOMMENDED SPARE PARTS: (1) Spiral - 3 Packers, 2 Grapples for each size, and 1 Control
(2) Basket - 2 Grapples, 2 Control Packers, or Mill Control Packers for each size
(3) Control Packer or Mill Control Packer - 3 inner, and Outer Seals
*Price Quoted on Request (Made to Order)
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
5 5 1150
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part (2) Top Connection
(3) Size & Type of Fish to be caught (4) If O.D. other than Standard, please specify clearly
SPECIAL NOTES: (1) Top Sub, Bowl, or Guide is left undersized or oversized, add 20% for the first 1/4" or portion
thereof and an additional 10% for each additional 1/4" or portion thereof.
(2) For Basket Grapples with long catch stop, add 10% to Basket Grapple price.
(3) For Basket Grapples with short catch stop, add 25% to Basket Grapple price.
(4) For Basket Grapples with R.H. Wickers, add 20% to Basket Grapple price.
(5) For left hand overshot, add 20% to assembly and parts prices.
FS (Full Strength) - Engineered to withstand all pulling, torsional, and jarring strain.
XFS (Extra Full Strength) - Engineered for extreme abuse.
SFS (Semi Full Strength) - Engineered for special hole condition commensurate with maximum strength.
SH (Slim Hole) - Engineered to withstand heavy pulling strains only.
XSH (Extra Slim Hole) - Engineered for pick up jobs only.
RECOMMENDED SPARE PARTS: (1) Spiral - 3 Packers, 2 Grapples for each size, and 1 Control
(2) Basket - 2 Grapples, 2 Control Packers, or Mill Control Packers for each size
(3) Control Packer or Mill Control Packer - 3 inner, and Outer Seals
*Price Quoted on Request (Made to Order)
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 1160
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
*6400 Side Door Overshot has a Straight Thread Top Connection in Bowl and requires special Top Subs.
Price includes Subs: RECOMMENDED SPARES:
#7243, 2 3/8 EUE - $250 2 Grapples for each size, Basket or Spiral
#7244, 3 1/2 DP - $270 2 Grapple Controls for each size
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 8 1500
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
To price extension subs with stops, add 20% and round off to nearest dollar.
SPECIFICATIONS - Please specify O.D. and length of sub, Overshot O.D., and Assembly Number.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 8 1500
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 8 1500
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 8 1500
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
O-RING SEAL Weight 1/100 1/100 1/100 1/100 1/50 1/50 1/50 1/50
(4 REQUIRED-1 PER PACKER) Price/Ea $2.45 $3.85 $5.90 $5.90 $8.25 $10.50 $10.50 $10.50
*This assembly is installed between Top Sub and Bowl. All others are installed between Bowl and Guide.
HOW TO ORDER: RECOMMENDED SPARES: (1) 2 Sets of Packers (4 per set)
Specify: (1) Number of Overshot (2) 8 O-Rings
(2) Size of fish to be caught
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
5 8 1500
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
6 8 1500
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
USE WITH OVERSHOT NO. 9105 C5112 5115 C5126 C5123 9635 C4619 C4732 9109 C5151
OVERSHOT MAXIMUM CATCH 3 1/8 3 1/4 3 1/4 3 3/8 3 3/8 3 3/8 3 1/2 3 1/2 3 21/32 3 21/32
MAXIMUM SIZE TO PACK 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8
OD OD OD OD OD NON NON NON OD OD
OFF - TUBING COLLAR
EUE EUE EUE EUE EUE UPSET UPSET UPSET EUE EUE
Part No. 9095 39391 39224 39392 39347 9639 39393 39394 6653 6653
COMPLETE ASSEMBLY Weight 4 5/8 6 4 1/4 5 5/8 5 3/4 4 3/8 5 3/4 4 1/4 4 5/8 4 5/8
Price $482 $497 $497 $497 $497 $497 $497 $497 $520 $520
REPLACEMENT PARTS
Part No. 809D 1517D B5118D B4625D 6515D 4185D 7065D 168D 6665D 6665D
PACKER INSERT Weight 4 3/8 5 3/4 4 5 1/2 5 1/2 4 1/8 5 1/2 4 4 3/8 4 3/8
Price $351 $354 $354 $354 $354 $354 $354 $354 $390 $390
Part No. 808 39194 39194 24044 808 4183 4183 4183 6654 6654
SPRING Weight 1/4 1/4 1/4 1/8 1/4 1/4 1/4 1/4 1/4 1/4
Price $129 $132 $132 $129 $129 $132 $132 $132 $132 $132
Part No. 568332 568231 568231 568332 568332 568232 568232 568232 568232 568232
O-RING Weight 1/32 1/32 1/32 1/32 1/32 1/32 1/32 1/32 1/32 1/32
Price/Ea $2.55 $2.55 $2.55 $2.55 $2.55 $2.45 $2.45 $2.45 $2.45 $2.45
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
7 8 1500
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
USE WITH OVERSHOT NO. 5162 8975 C5165 C4814 5737 5698 C5168 C4829 C7096 C7093
OVERSHOT MAXIMUM CATCH 4 1/4 4 1/2 4 1/2 4 1/2 4 5/8 4 5/8 4 3/4 4 3/4 4 7/8 4 7/8
MAXIMUM SIZE TO PACK 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 4 4 4 4
NON OD OD OD OD OD NON NON NON NON
OFF - TUBING COLLAR
UPSET EUE EUE EUE EUE EUE UPSET UPSET UPSET UPSET
Part No. 35696 6104 B13548 39405 39406 18661 39407 39408 39409 39410
COMPLETE ASSEMBLY Weight 8 3/8 7 1/2 9 8 8 9 8 1/2 8 1/2 5 1/2 12 1/2
Price $536 $585 $554 $554 $563 $563 $585 $585 $613 $613
REPLACEMENT PARTS
Part No. 4672D 6114D A2487D B2199-1D
B2199 1D 195D 1140D B2199D B2362D B6387D B2455D
PACKER INSERT Weight 8 7 8 1/2 7 1/2 7 1/2 8 1/2 8 8 10 12
Price $398 $455 $418 $418 $435 $435 $455 $455 $455 $455
Part No. 914 6129 6129 6129 6129 18662 6129 6129 39236 39236
SPRING Weight 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
Price $132 $132 $132 $132 $132 $132 $132 $132 $162 $162
Part No. 568236 568237 568238 568238 568238 568238 568238 568238 568241 568241
O-RING Weight 1/32 1/32 1/32 1/32 1/32 1/32 1/32 1/32 1/32 1/32
Price/Ea $2.90 $2.90 $2.55 $2.55 $2.55 $2.55 $2.55 $2.55 $3.85 $3.85
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
8 8 1500
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 1800
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 2 1900
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
2 7/8 2 7/8 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 4 1/2 4 1/2 4 1/2
NOMINAL SIZE
REG IF PIPE UPSET REG FH IF PIPE UPSET REG
TO CATCH 3 3/4 4 1/8 3 1/2 3 3/16 4 1/4 4 5/8 4 3/4 4 1/2 5 5 1/2
TOTAL LENGTH 24 24 32 32 32 32 32 36 36 36
OUTSIDE DIAMETER 4 7/8 5 1/4 4 3/4 5 1/16 5 1/2 5 7/8 6 5 7/8 6 3/8 6 7/8
DIAMETER OF LARGEST
3 15/16 4 5/16 3 3/4 4 1/16 4 1/2 4 7/8 5 4 3/4 5 1/4 5 3/4
WICKER
DIAMETER OF SMALLEST
3 1/8 3 1/2 2 5/8 2 15/16 3 3/8 3 3/4 3 7/8 3 3/8 3 7/8 4 3/8
WICKER
Part No. 16205 16206 16207 16208 16209 16210 16211 16227 16213 16214
TYPE A WITH PLAIN OR LIPPED
Weight 72 81 95 107 121 132 138 152 174 196
BOTTOM
Price $1,946 $2,065 $2,284 $2,531 $2,703 $2,969 $3,015 $3,289 $3,590 $4,009
Part No. 16205 16206 16207 16208 16209 16210 16211 16227 16213 16214
TYPE A WITH CARBURIZED
Weight 73 82 98 110 124 135 141 156 178 200
MILL TEETH
Price $2,083 $2,458 $2,703 $2,969 $3,124 $3,407 $3,454 $3,736 $4,009 $4,495
Part No. 16256 16257 16258 16259 16260 16261 16262 15984 16264 16265
TYPE B LESS GUIDE Weight 71 80 93 105 119 130 136 148 170 192
Price $2,220 $2,385 $2,531 $2,896 $2,988 $3,289 $3,398 $3,655 $3,920 $4,358
Part No. 16230 16231 16232 16233 16234 16235 16236 15985 16237 16238
GUIDE STANDARD O.D. WITH
Weight 9 10 9 10 12 14 15 18 20 22
PLAIN OR LIPPED BOTTOM
Price $484 $516 $405 $516 $550 $603 $603 $603 $620 $693
Part No. 16230 16231 16232 16233 16234 16235 16236 15985 16237 16238
GUIDE STANDARD O.D. WITH
Weight 8 9 8 9 11 13 14 16 18 20
CARBURIZED MILL TEETH
Price $1,179 $1,252 $1,179 $1,252 $1,252 $1,296 $1,296 $1,296 $1,361 $1,416
ADDITIONAL LENGTH
PRICE PER INCH Price $130 $130 $142 $142 $157 $157 $157 $157 $157 $157
HOW TO ORDER:
Specify: (1) Name and Number of Part (3) Type and Size Guide if Required
(2) Connection (4) O.D. if other than Standard
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 1900
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Part (3) Type and size Guide if Required
(2) Connection (4) O.D. if other than Standard
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 1 2000
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
TABLE OF CONTENTS
2100 Bowen Releasing Spear - Full Circle Type for Drillpipe and Tubing A
2300 Bowen Releasing Spear - Itco Type A
2710 Bowen Simplex Packer Retriever A
2800 Taper Taps A
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 12 2100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
BOWEN RELEASING SPEAR - FULL CIRCLE TYPE FOR DRILLPIPE AND TUBING
NOMINAL SIZE 2 3/8 2 3/8 2 7/8 2 7/8 3 1/2 3 1/2 4 4 4 1/2 5 1/2
RECOMMENDED 2 3/8 2 3/8 2 7/8 2 7/8 3 1/2 3 1/2 4 4 4 1/2 5 1/2-9/16
CATCHING RANGE DP TBG DP TBG DP TBG DP TBG DP DP
O.D. SMALLEST SLIPS
1 11/16 1 29/32 2 2 5/16 2 7/16 2 13/16 3 3/32 3 5/16 3 15/32 4 1/2
RETRACTED
EXPANSION SLIPS OVER
11/32 11/32 3/8 3/8 13/32 13/32 15/32 15/32 1/2 9/16
SAFETY RING
SLIP ENGAGEMENT AREA 55 59 74 87 95 115 126 136 178 265
Part No. 6175 6693 6246 6684 7640 6701 7648 6710 6715 6723
COMPLETE ASSEMBLY Weight 32 40 55 60 71 92 107 127 180 270
Price $6,633 $6,633 $7,730 $7,939 $9,155 $9,182 $11,074 $11,074 $12,563 $16,125
REPLACEMENT PARTS
Part No. 6176 5858 6247 5774 6363 6702 6676 5839 6270 6277
TOP SUB
Weight 20 20 27 19 28 28 50 35 52 80
(INCLUDES PROTECTOR)
Price $1,080 $1,080 $1,173 $1,173 $1,272 $1,272 $1,534 $1,534 $1,688 $2,215
Part No. 6176-1 5858-1 6247-1 5774-1 6263-1 6702-1 6676-1 5839-1 6270-1 6277-1
PROTECTOR Weight 1 1 4 1 2 1/2 2 3 1/2 2 3 1/2 5 1/2
Price $168 $168 $177 $177 $201 $201 $241 $241 $248 $263
Part No. 6177 6694 6248 6685 7641 6703 7649 6711 6716 6724
BODY Weight 12 15 19 21 27 31 36 43 60 100
Price $1,791 $1,791 $2,366 $2,466 $2,786 $2,859 $3,262 $3,262 $3,728 $5,043
Part No. 6178 6695 6249 6686 C7642 6704 7650 6712 6717 6725
SLIP Req Qty 3 3 3 3 3 3 3 3 3 4
(INCLUDES FINGERS) Weight 1 1 1/4 1 3/8 1 1/2 2 1/2 5 6 7 9 12
Price/Ea $683 $683 $749 $784 $977 $977 $1,033 $1,033 $1,252 $960
Part No. 6179 6696 6250 6687 A7643 A6705
UNITIZER Weight 1 1 1/4 1 3/4 2 3 4
Price $645 $645 $746 $746 $840 $840
Part No. 6546F 6697F A6542F 6688F 7644F A6706F
FRICTION RETAINER
Weight
g 1/2 1/2 5/8 5/8 1 1
(WITH SPRINGS)
Price $471 $471 $530 $530 $557 $557
Part No. 6423 6423 6423 6423 6423 23508
FRICTION RETAINER SCREWS
Weight 1/16 1/16 1/16 1/16 1/16 1/16
(4 REQUIRED)
Price/Ea $13.50 $13.50 $13.50 $13.50 $13.50 $1.30
Part No. 8951 8951 8945 8945 A8952 A8952
Req Qty 8 8 10 10 12 12
FRICTION RETAINER SPRINGS
Weight 1/16 1/16 1/16 1/16 1/16 1/16
Price/Ea $11.20 $11.20 $13.50 $13.50 $16.10 $16.10
Part No. 14931 14901 14937 14838
FRICTION BLOCK ASSEMBLY
Weight 9 9 10 10
CONSISTS OF:
Price $2,274 $2,274 $2,385 $3,920
Part No. 14932 14902 14938 14839
UNITIZER Weight 6 6 7 7
Price $1,407 $1,407 $1,407 $2,211
Part No. 14933 14903 14939 14841
RETAINER
Weight 1 1 1 1/2 1 1/2
(2 PIECE SET)
Price/Set $190 $190 $190 $212
Part No. 14934 14904 14940 14840
Req Qty 2 2 2 4
FRICTION BLOCK
Weight 1/2 1/2 1/2 1/2
Price $248 $248 $285 $291
Part No. 15964 23108 15964 25214
Req Qty 4 4 4 4
RETAINER SCREW
Weight 1/8 1/8 1/8 1/8
Price/Ea $1.45 $1.45 $1.45 $1.45
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 12 2100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
BOWEN RELEASING SPEAR - FULL CIRCLE TYPE FOR DRILLPIPE AND TUBING
NOMINAL SIZE 2 3/8 2 3/8 2 7/8 2 7/8 3 1/2 2 1/2 4 4 4 1/2 5 1/2
DP TBG DP TBG DP TBG DP TBG DP DP
COMPLETE ASSEMBLY Part No. 6175 6693 6246 6684 7640 6701 7648 6710 6715 6723
Part No. 14935 14919 14941 14842
Req Qty 4 4 4 8
BLOCK SPRING - OUTER
Weight 3/8 3/8 3/8 3/8
Price/Ea $23 $23 $23 $23
Part No. 14936 14920 14942 14837
Req Qty 4 4 4 8
BLOCK SPRING - INNER
Weight 1/4 1/4 1/4 1/4
Price/Ea $21.00 $21.00 $21.00 $21.00
Part No. 7638 6961 7639 A7452 A7645 7647 7653 7654 7655 7454
STOP Weight 1/3 1/2 5/8 3/4 1 1 1/2 2 2 1/2 3 4
Price $355 $355 $424 $424 $424 $424 $588 $588 $653 $750
Part No. 6547 6545 6543 6424 6541 6707 6681 6539 6720 6485
SAFETY RING Weight 3/4 4/5 1 1/2 1 3/4 2 2 1/2 3 3 1/2 4 1/2 7
Price $99 $99 $128 $128 $130 $130 $137 $137 $151 $158
Part No. 6180 5864 6251 6345 6267 6708 6682 5729 6721 6483
NUT Weight 2 2 1/2 3 4 4 1/2 5 1/2 7 9 12 28
Price $249 $249 $292 $292 $385 $385 $457 $457 $545 $682
NUT SET SCREW (2 Part No. 23330 23330 17762 17762 17762 23358 23345 23366 23368 23379
REQUIRED) Price/Ea $1.35 $1.35 $1.35 $1.35 $1.35 $2.05 $2.05 $2.05 $2.70 $4.05
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 12 2100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
BOWEN RELEASING SPEAR - FULL CIRCLE TYPE FOR DRILLPIPE AND TUBING
NOMINAL SIZE 2 3/8 2 3/8 2 7/8 2 7/8 3 1/2 3 1/2 4 4 4 1/2 5 1/2
DP TBG DP TBG DP TBG DP TBG DP DP
COMPLETE ASSEMBLY Part No. 6175 6693 6246 6684 7640 6701 7648 6710 6715 6723
ACCESSORIES
Part No. 6181 6174 6252 5779 6268 6709 6683 5730 6722 6484
SAFETY RING PACKOFF Weight 5/8 3/4 1 1 1/4 1 1/2 1 3/4 2 1/2 2 3/4 3 1/2 6
Price $335 $335 $381 $381 $471 $471 $505 $505 $543 $608
6176- 5858- 6247- 5771- 6263- 6702- 6676- 5839- 6270- 6277-
Part No.
EXTENSION 6177 6694 6248 6685 7641 6703 7649 6711 6716 6724
( 3 FEET LONG ) Weight 22 26 29 40 46 60 70 75 85 130
Price $755 $796 $796 $887 $887 $977 $1,004 $1,041 $1,041 $1,179
Part No. 6180A 5864A 6251A 6345A 6267A 6708A 6682A 5729A 6721A 6483A
MILL TYPE A NUT Weight 1 3/4 2 2 1/2 3 1/4 3 3/4 4 1/2 6 8 11 26
Price $432 $432 $494 $494 $601 $601 $690 $690 $820 $1,041
Part No. 6180B 5864B 6251B 6345B 6267B 6708B 6682B 5729B 6721B 6483B
SUB TYPE B NUT Weight 2 1/2 3 3 1/2 4 3/4 5 1/2 6 1/2 9 11 14 1/2 31
Price $355 $355 $401 $401 $484 $484 $555 $555 $630 $824
Part No. 6180C 5864C 6251C 6345C 6267C 6708C 6682C 5729C 6721C 6483C
SIDE HILL TYPE C NUT Weight 2 2 1/2 3 4 4 3/4 5 1/2 8 9 1/2 13 29
Price $355 $355 $401 $401 $484 $484 $555 $555 $630 $824
OPTIONAL ACCESSORIES
Part No. 7651 B6713 6718 6726
UNITIZER Weight 5 1/2 7 8 1/2 11
Price $923 $968 $987 $1,288
Part No. 7652F 6714F 6719F 6727F
FRICTION RETAINER
Weight 2 2 1/2 3 4 1/2
(INCLUDES SPRINGS)
Price $796 $796 $877 $1,106
Part No. 23508 23508 23508 25214
FRICTION RETAINER SCREWS
Weight 1/16 1/16 1/16 1/16
(4 REQUIRED)
Price/Ea $1.30 $1.30 $1.30 $1.45
Part No. A8953 A8953 A8953 8918
Req Qty 12 12 14 16
FRICTION RETAINER SPRINGS
Weight 1/32 1/32 1/32 1/24
Price/Ea $21.00 $21.00 $21.00 $21.00
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 12 2100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
5 12 2100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
SPECIAL NOTES: If Body is left oversize, add 10% (of the Body price) for each additional 1/4" or portion thereof.
Prices of Oversize Slips or Friction Blocks will be Priced on Request.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
6 12 2100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
OPTIONAL ACCESSORIES
Part No. 10539 B9340 9345 9350 9799 9355 10611 7493 10476 6070
UNITIZER Weight 8 9 11 14 18 23 30 38 48 60
Price $1,004 $1,004 $1,288 $1,462 $1,608 $1,883 $2,010 $2,020 $3,015 $4,321
Part No. 10540 9341 9346 9351 9800 9356 10612 7495F B10477 6532F
FRICTION RETAINER
Weight 3 3 3/4 4 1/2 6 7 1/2 9 12 15 20 24
(SPRINGS)
Price $968 $968 $1,115 $1,279 $1,425 $1,580 $1,608 $1,708 $2,211 $4,367
Part No. 25214 25214 25214 23518 6964 6964 25175 25175 25175 25175
FRICTION RETAINER SCREWS Weight 1/50 1/50 1/50 1/30 1/20 1/20 1/10 1/10 1/10 1/10
Price/Ea $1.50 $1.50 $1.50 $1.30 $1.50 $1.50 $2.05 $2.05 $2.05 $2.05
Part No. 10541 10541 10541 9606 9606 9606 10613 8948 8948 A9631
Req Qty 14 14 16 18 18 20 16 14 16 16
FRICTION RETAINER SPRINGS
Weight 1/24 1/24 1/24 1/16 1/16 1/16 1/12 1/12 3/16 3/16
Price/Ea $23 $23 $23 $35 $35 $35 $39 $39 $39 $39
Part No. 15001
FRICTION BLOCK Req Qty 4
(FOR 9 5/8" CASING) Weight 3 1/2
Price/Ea $429
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
7 12 2100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
SPECIAL NOTES: If Body is left oversize, add 10% (of the Body price) for each additional 1/4" or portion thereof.
Prices of Oversize Slips or Friction Blocks will be Priced on Request.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
8 12 2100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify:
(1) Name & Number of Assembly or Parts
(2) Size & Type of Top Connection
(3) Size & Weight of Pipe to be caught
SPECIAL NOTES: If Body is left oversize, add 10% (of the body price) for each additional 1/4" or portion thereof.
Prices of Oversize Slips or Friction Blocks will be Priced on Request.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
10 12 2100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
NOTE: The above listed Spears for Drill Pipe will pass through API, Reed, Spang,
Hughes, Hydril IF Tool Joints, and through internal upset section on
Spang Double Seal External Upset Drill Pipe.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
11 12 2100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
* If Spear Must Pass Through Joint on 5"5 - 15 Lb. Spang Extreme Line CSG,
or through Joint on 8 5/8" - 32 Lb. Spang Extreme Line CSG,
use next smaller size Slip and Safety Ring or Safety Ring Packoff.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
12 12 2100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
* If Spear Must Pass Through Joint on 5" - 15 Lb. Spang Extreme Line CSG,
or through Joint on 8 5/8" - 32 Lb. Spang Extreme Line CSG,
use next smaller size Slip and Safety Ring or Safety Ring Packoff.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
BOWEN TOOLS PRICE BOOK
RELEASING SPEAR
19350 1.313 O.D.Pipe Standard - 1 5/8 3 3 - 3 5/16 1 3/8 2 1/2 15/16 7 11/16 11 13/16 - - 1/4
11195 1.660 O.D.Tubing Standard - 1 13/16 3 3 3 25/32* 3 5/16 1 3/8 2 1/2 1 1/8 7 11/16 11 13/16 - - 3/8
35841 1.660 O.D.Tubing Standard L.H. - 1 13/16 3 3 3 25/32* 3 5/16 1 3/8 2 1/2 1 1/8 7 11/16 11 13/16 - - 3/8
9915 1.900 O.D.Tubing Standard - 2 1/2 5 3 7 5 1/16 2 1/4 5 5/8 1 3/8 10 5/16 18 11/16 - - 7/16
9645 2 3/8 O.D.Drill Pipe Standard - 3 1/8 7 3 7 5 29/32 2 1/4 6 17/32 1 11/16 - - 19 7/16 - 5/8
17470 2 3/8 O.D.Drill Pipe Heavy Duty - 3 1/8 7 3 7 9 2 1/4 6 5/8 1 11/16 14 1/4 25 5/8 22 5/8 - 5/8
1344 2 3/8 O.D.Tubing Standard 3/8 3 1/8 7 3 7 6 3/4 2 1/4 6 5/8 1 7/8 12 23 3/8 23 3/8 - 5/8
17228 2 3/8 O.D.Tubing Heavy Duty 3/8 3 1/8 7 3 7 9 2 1/4 6 5/8 1 7/8 14 1/4 25 5/8 22 5/8 - 5/8
1227 2 7/8 O.D.Tubing Standard 3/8 3 3/4 7 3 7 1/4 6 3/4 2 1/2 7 2 5/16 12 1/4 21 - 5/8
17231 2 7/8 O.D.Tubing Heavy Duty 3/8 3 3/4 7 3 7 1/4 9 2 1/2 7 2 5/16 14 1/2 26 23 1/4 - 5/8
18820 2 7/8 O.D.Tubing Heavy Duty L.H. 3/8 3 3/4 7 3 7 1/4 9 2 1/2 7 2 5/16 14 1/2 26 23 1/4 - 5/8
9410 3 1/2 O.D.Tubing Standard 1/2 3 3/4 7 3 1/2 10 1/2 12 3 1/2 9 2 13/16 19 31 1/2 32 1/2 - 5/8
9945 3 1/2 O.D.Drill Pipe Heavy Duty 1/2 3 3/8 7 3 1/2 10 1/2 9 3/4 3 5/8 8 1/8 2 1/2 16 5/8 31 1/8 - - 5/8
530 4 O.D.Tubing Light Duty 3/4 3 3/4 7 1/2 3 10 3/8 8 1/8 2 1/2 8 3 1/4 13 5/8 26 5/8 26 1/2 - 5/8
9485 4 O.D.Tubing Standard 3 1/4 4 1/8 7 1/2 3 10 1/2 12 3 1/2 9 3 1/4 18 1/2 31 1/2 31 1/2 - 5/8
13200 4 1/2 O.D.Tubing Light Duty 3/4 4 1/2 8 3 1/2 3 3/4 9 3/4 3 1/2 10 3/4 3 5/8 16 3/4 32 32 - 1
17475 4 1/2 O.D.Tubing Standard 3/4 4 1/2 8 3 1/2 11 14 1/4 3 1/2 10 3 5/8 21 1/4 35 3/4 33 3/4 - 3/4
*Without Sub
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
BOWEN TOOLS PRICE BOOK
RELEASING SPEAR
9680 5 O.D. Casing Standard 7/8 5 8 3 1/2 12 14 1/4 3 1/2 10 5/8 4 1/32 21 1/4 36 3/8 36 7/8 - 13/16
18270 5 O.D. Casing Heavy Duty 7/8 5 8 3 1/2 12 14 1/4 3 1/2 10 4 1/32 21 1/4 36 3/8 36 7/8 - 1
20115 5 O.D. Casing Standard L.H. 7/8 5 8 3 1/2 12 14 1/4 3 1/2 10 5/8 4 1/32 21 1/4 36 3/8 36 7/8 - 13/16
9715 6 O.D.Casing Light Duty 1 6 8 5 1/2 12 13 3 1/2 12 5 16 3/8 39 3/16 37 11/16 3 5/16 1 1/4
9266 7 O.D.Casing Standard 2 7 10 6 1/2 16 1/2 14 5/8 3 1/2 12 3/4 5 11/16 - - 40 1/4 3 1/2 1 5/8
20890 7 O.D.Casing Standard L.H. 2 7 10 6 1/2 12 7/8 14 5/8 3 1/2 12 3/4 5 11/16 - - 40 1/4 3 1/2 1 5/8
17237 7 O.D.Casing Heavy Duty 2 7 10 6 1/2 13 1/2 21 3/8 3 1/2 12 3/4 5 11/16 31 3/8 53 3/8 47 3 1/2 1 5/8
9572 8 O.D.Casing Light Duty 2 8 10 6 1/2 20 7/8 14 5/8 4 1/2 13 3/4 6 15/16 - 49 1/4 5 3/4 1 5/8
9380 8 5/8 O.D.Casing Standard 2 3/4 8 5/8 14 7 20 7/8 14 5/8 4 1/2 13 3/4 7 1/4 26 1/8 53 7/8 49 1/4 5 1 5/8
17243 8 5/8 O.D.Casing Heavy Duty 2 3/4 8 5/8 - - 20 7/8 21 3/8 4 1/2 13 3/4 7 1/4 - - 56 5 3/4 1 5/8
20895 8 5/8 O.D.Casing Standard L.H. 2 3/4 8 5/8 - - 20 7/8 14 5/8 4 1/2 13 3/4 7 1/4 - - 49 1/4 5 3/4 1 5/8
9281 9 5/8 O.D.Casing Standard 2 13/16 9 5/8 15 3/8 7 20 7/8 14 5/8 3 1/2 14 8 1/4 25 1/8 51 49 1/4 6 1/4 1 5/8
20120 9 5/8 O.D.Casing Standard L.H. 2 3/4 9 5/8 - - 20 7/8 14 5/8 3 1/2 13 3/4 8 1/4 - - 49 1/4 6 1/4 1 5/8
17246 9 5/8 O.D.Casing Heavy Duty 2 13/16 9 5/8 - - 20 7/8 21 3/8 3 1/2 13 3/4 8 1/4 - - 56 6 1/4 1 5/8
27780 13 3/8 O.D.Casing Standard 3 1/2 13 3/8 17 7/8 7 22 3/8 16 7/8 3 1/2 12 11 3/4 27 3/8 53 3/4 51 1/4 7 3/4 1 5/8
*Without Sub
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
** Note : Prices shown for the spear assemblies include "Flush" Type Mandrels ("H" O.D.).
To price an assembly provided with a "Shoulder" Type Mandrel, subtract the price
of the "Flush" Type Mandrel and add the price of the "Shoulder" Type Mandrel to
the assembly price.
See chart for weight & oversize Grapple price
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER :
Specify : (1) Name and Number of Assembly or Part
(2) Size & Type of Top Connection
(3) Size and Weight or Weights of Pipe to be caught
(4) Flush or Shoulder Type (Specify O.D. of Shoulder) ("A")
(5) Mandrel Length Desired ("C")
(6) Thread Size & Type of Nut (If Required)
SPECIAL NOTES : (1) Assembly prices are for Flush Mandrels. Add difference of Mandrel prices for
Assembly with Shoulder Type Mandrel.
(2) Oversize Shoulders: Add 10% of Mandrel price for each 1/4" of Oversize.
(3) Add 10% to Mandrel (Shoulder Type) price for Skirt Thread & Cap.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
*Note : Prices shown for the Spear Assemblies include "Flush" Type Mandrels ( "H" O.D. ).
To price an Assembly provided with a "Shoulder" Type Mandrel, subtract the price of the "Flush" Type Mandrel and add the
price of the "Shoulder" Type Mandrel to the assembly price.
See chart for weight & oversize Grapple price
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
*Note : Prices shown for the Spear Assemblies include "Flush" Type Mandrels ( "H" O.D. ).
To price an Assembly provided with a "Shoulder" Type Mandrel, subtract the price of the "Flush" Type Mandrel and add the
price of the "Shoulder" Type Mandrel to the assembly price.
See chart for weight & oversize Grapple price
** Price on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
5 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
* Segment Type Grapple Assembly, Part No. 9283 to Catch Pipe Weight of 133 lbs., $10,105.00
** Price on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
6 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
7 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
PACKOFF SIZES AVAILABLE 2 7/8 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 4 4 4
TBG TBG TBG TBG TBG TBG TBG TBG TBG TBG
3 1/2 4 4 4 4 4 4
DRILL TBG TBG TBG TBG TBG TBG
PIPE
ASSEMBLY NUMBER 9595 9600 9600 9600 9600 9600 9600 9605 9605 9605
3 1/2 3 1/2 3 1/2 3 1/2 4 4 4 4 4 4
ASSEMBLY DRESSED TO
DRILL TBG TBG TBG TBG TBG TBG TBG TBG TBG
PACKOFF
PIPE
PACKER Weight 10.2 9.2 10.2 7.7 11.0 11.6 9.5 11.0 11.6 9.5
Part No. 14960 16146 16146 16370 14036 14036 14034 14036 14036 14034
PACKING
Price $184 $298 $298 $298 $251 $251 $251 $251 $251 $251
Part No. 6437 16440 16440 16440 6696 6696 6696 6696 6696 6696
THIMBLE
Price $174 $198 $198 $198 $198 $198 $198 $198 $198 $198
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part
(2) Top Connection
(3) Size and Weight of Pipe to be run in
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
8 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part
(2) Top Connection
(3) Size and Weight of Pipe to be run in
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
9 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Part No. 19352 19352 19352 19352 11197 11197 11197 11197 11197 11197
GRAPPLE
Price $738 $738 $738 $738 $738 $738 $738 $738 $738 $738
APPROXIMATE WEIGHT 1 1 1/2 1 1/2 2 2 2 2 2 2 2
ACTUAL CATCHING RANGE
MINIMUM ID .956 1.005 1.050 1.081 1.137 1.180 1.211 1.242 1.273 1.332
NOMINAL CATCH SIZE * .978 1.027 1.072 1.103 1.170 1.215 1.246 1.277 1.308 1.367
MAXIMUM ID 1.000 1.049 1.093 1.125 1.207 1.250 1.281 1.312 1.342 1.402
OLD NOMINAL SIZE
(GRAPPLES WERE MARKED WITH THIS DESCRIPTION)
1.000 1.045- 1.093 1.25 1.187 1.250- 1.281- 1.312- 1.343- 1 3/8
OLD NOMINAL SIZE ID 1 STD ID ID ID 1.219 1.250 1.281 1.312 ID
PIPE ID ID ID ID 1 1/4
TBG
YIELD STRENGTH 29400 29400 29400 29400 43600 43600 43600 43600 43600 43600
Part No. 11197 11197 11197 11197 11197 11197 11197 11197 11197 11197
GRAPPLE
Price $738 $738 $738 $738 $738 $738 $738 $738 $738 $738
APPROXIMATE WEIGHT 2 2 2 2 2 2 2 2 2 2 1/2
ACTUAL CATCH RANGE
MINIMUM ID 1.394 1.430 1.580 1.481 1.519 1.650 1.722 1.771 1.836 1.895
NOMINAL CATCH SIZE * 1.429 1.465 1.615 1.516 1.554 1.687 1.757 1.806 1.875 1.930
MAXIMUM ID 1.464 1.500 1.652 1.551 1.589 1.720 1.792 1.841 1.906 1.965
OLD NOMINAL SIZE
(GRAPPLES WERE MARKED WITH THIS DESCRIPTION)
1.438 1.500- 1 1/2 1.531 1 9/16 1.687- 1 3/4- 1.815 17/8- 1 15/16
ID 1.469 STD ID ID 1.700 1 25/32 ID 1 39/32 ID
OLD NOMINAL SIZE ID PIPE ID ID ID
AND
1 5/8
ID
YIELD STRENGTH 43600 43600 43600 43600 43600 43600 43600 43600 43600 43600
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
10 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Part No. 11197 11197 9917 9917 9917 9917 9917 9917 9917 9917
GRAPPLE
Price $738 $738 $738 $738 $738 $738 $738 $738 $738 $738
APPROXIMATE WEIGHT 2 1/2 2 1/2 2 2 2 2 2 2 2 2
ACTUAL CATCH RANGE
MINIMUM ID 1.957 2.024 1.441 1.553 1.566 1.598 1.612 1.673 1.707 1.742
NOMINAL CATCH SIZE * 1.992 2.061 1.470 1.583 1.596 1.628 1.642 1.700 1.737 1.772
MAXIMUM ID 2.027 2.094 1.500 1.610 1.625 1.657 1.670 1.750 1.781 1.800
OLD NOMINAL SIZE
(GRAPPLES WERE MARKED WITH THIS DESCRIPTION)
2 ID 2.067 1 1/2 1 1/2 1 5/8 1.657 1.670 1 3/4 1.781 1.800
ID EXTRA STD ID ID ID 1.700 ID ID
OLD NOMINAL SIZE STRONG PIPE ID
PIPE 1.610
1.500 ID
ID
YIELD STRENGTH 43,600 43,600 62,000 62,000 62,000 62,000 62,000 62,000 62,000 62,000
Part No. 9917 9917 9917 9647 9647 9647 9647 9647 17230 17230
GRAPPLE
Price $738 $738 $738 $814 $814 $814 $814 $814 $1,345 $1,345
Part No. 1348 1348
GRAPPLE
Price $748 $748
APPROXIMATE WEIGHT 2 1/2 2 1/2 2 1/2 2 2 2 2 3 3 3
ACTUAL CATCH RANGE
MINIMUM ID 1.817 1.881 1.942 1.677 1.742 1.802 1.864 1.968 1.788 1.796
NOMINAL CATCH SIZE * 1.847 1.911 1.972 1.719 1.778 1.838 1.900 2.004 1.828 1.836
MAXIMUM ID 1.875 1.939 2.000 1.750 1.815 1.875 1.937 2.041 1.867 1.876
OLD NOMINAL SIZE
((GRAPPLES WERE MARKED WITH THIS DESCRIPTION))
1 7/8 1.939 2 ID 1.719- 2 3/8 1 7/8 1.875- 2 3/8 1.867 1.875
OLD NOMINAL SIZE ID ID 1.750 DRILL ID & 1.937 TBG ID TURN ID TURN
ID PIPE 1 27/32 ID 4 - 4.7 BODY BODY
6.65 DOWN DOWN
YIELD STRENGTH 62000 62000 62000 116400 116400 116400 116400 116400 116400 116400
Part No. 17230 17230 17230 17230 17230 17230 17230 17230 17230 17230
GRAPPLE
Price $1,345 $1,345 $1,345 $1,345 $1,345 $1,345 $1,345 $1,345 $1,345 $1,345
Part No. 1348 1348 1348 1348 1348 1348 1348 1348 1348 1348
GRAPPLE
Price $748 $748 $748 $748 $748 $748 $748 $748 $748 $748
APPROXIMATE WEIGHT 3 3 3 3 3 4 4 4 4 6
ACTUAL CATCH RANGE
MINIMUM ID 1.889 1.952 1.983 2.045 2.091 2.170 2.186 2.233 2.249 2.295
NOMINAL CATCH SIZE * 1.929 1.992 2.023 2.085 2.131 2.211 2.226 2.273 2.289 2.335
MAXIMUM ID 1.968 2.041 2.062 2.125 2.172 2.250 2.266 2.312 2.329 2.375
OLD NOMINAL SIZE
(GRAPPLES WERE MARKED WITH THIS DESCRIPTION)
1.937- 2 3/8 2.000- 2 1/8 2 7/8 2 1/4- 2 17/64 2 5/16 2 7/8 2 3/8
1.968 TBG 2.062 ID DRILL 2 3/16 ID ID O.D. ID NX
OLD NOMINAL SIZE ID 4 - 4.7 ID PIPE ID DRILL 1/2
9.75 - 7.8- ROD
10.4 8.35
YIELD STRENGTH 132000 132000 132000 132000 132000 132000 132000 132000 132000 132000
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
11 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Part No. 17233 17233 17233 17233 17233 17233 17233 17233 17233 17233
GRAPPLE
Price $1,438 $1,438 $1,438 $1,438 $1,438 $1,438 $1,438 $1,438 $1,438 $1,438
Part No. 1230 1230 1230 1230 1230 1230 1230 1230 1230 1230
GRAPPLE
Price $817 $817 $817 $817 $817 $817 $817 $817 $817 $817
APPROXIMATE WEIGHT 5 5 5 5 5 5 8 8 8 8
ACTUAL CATCH RANGE
MINIMUM ID 2.280 2.351 2.390 2.468 2.515 2.593 2.671 2.700 2.827 2.843
NOMINAL CATCH SIZE * 2.328 2.399 2.438 2.516 2.562 2.641 2.718 2.748 2.875 2.891
MAXIMUM ID 2.375 2.446 2.487 2.563 2.610 2.688 2.766 2.813 2.922 2.938
OLD NOMINAL SIZE
(GRAPPLES WERE MARKED WITH THIS DESCRIPTION)
2 3/8 2 3/8- 2 7/8 2.562- 3 1/2 2 11/16 3 1/2 2 13/16 3 1/2 2 7/8 -
ID 2 7/16 TBG 2 15/32 OD 2 5/8 OD ID & OD 2 15/16
ID 6.25 ID 15.5 ID 13.3 2 3/4 10.2- ID
OLD NOMINAL SIZE 6.5 DRILL 12.4 ID 11.2
2-7/8 PIPE DRILL DRILL
DRILL PIPE PIPE
PIPE
6.45#
YIELD STRENGTH 270000 270000 270000 270000 270000 270000 270000 270000 270000 270000
Part No. 17233 17233 17233 17233 17233 17233 9412 9412 9412
GRAPPLE
Price $1,438 $1,438 $1,438 $1,438 $1,438 $1,438 $1,611 $1,611 $1,611
Part No. 1230 1230 1230 1230 1230 1230
GRAPPLE
Price $817 $817 $817 $817 $817 $817
APPROXIMATE WEIGHT 11 11 11 11 13 13 10 10 10
ACTUAL CATCH RANGE
MINIMUM ID 2.890 2.984 3.030 3.155 3.297 3.437 2.881 2.949 3.021
NOMINAL CATCH SIZE * 2.938 3.032 3.078 3.203 3.345 3.485 2.933 3.001 3.073
MAXIMUM ID 2.992 3.079 3.125 3.250 3.392 3.532 2.992 3.068 3.125
OLD NOMINAL SIZE
(GRAPPLES WERE MARKED WITH THIS DESCRIPTION)
3 1/2 3 1/2 3 1/8 3 1/4 3.340- 3 1/2 3 1/2 3 1/2 3 1/8
OD OD 3 1/16 3 3/16 3.382 ID OD OD ID
9.20 - 7.7 ID ID ID, 4 9.20 - 7.70 -
OLD NOMINAL SIZE 10.2 TBG O.D. 10.2 9.2
TBG 8.5 12.5 -
DRILL 15
PIPE DRILL
PIPE
YIELD STRENGTH 270000 270000 270000 270000 270000 270000 270000 270000 270000
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
12 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Part No. 9487 9487 9487 9487 9487 9487 9487 9487 9487 9487
GRAPPLE
Price $1,688 $1,688 $1,688 $1,688 $1,688 $1,688 $1,688 $1,767 $1,767 $1,767
Part No. 532 532 532 532 532 532 532 532 532 532
GRAPPLE
Price $1,480 $1,480 $1,480 $1,480 $1,480 $1,480 $1,480 $1,531 $1,531 $1,531
APPROXIMATE WEIGHT 16 16 16 16 22 22 22 22 26 26
ACTUAL CATCH RANGE
MINIMUM ID 3.484 3.608 3.671 3.812 3.874 3.937 4.134 4.155 4.358 4.406
NOMINAL CATCH SIZE * 3.557 3.681 3.744 3.885 3.947 4.010 4.207 4.228 4.431 4.479
MAXIMUM ID 3.625 3.754 3.826 3.958 4.026 4.090 4.276 4.300 4.506 4.560
OLD NOMINAL SIZE
(GRAPPLES WERE MARKED WITH THIS DESCRIPTION)
3 5/8 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 5 OD 5 5 OD 5 OD
ID & OD OD OD OD OD 18 - TBG 11.5 17.7 -
OLD NOMINAL SIZE 3 9/16 18.10 - 15.35 - 13.75 - 11 - 9.50 - 21 12.64 - TBG 18
ID 22 18.1 15.35 13.75 11.6 TBG 15 TBG
TBG TBG TBG TBG TBG (4.408)
ID
YIELD STRENGTH 530000 530000 530000 530000 530000 530000 530000 530000 530000 530000
Part No. 9487 17477 17477 17477 17477 17477 17477 17477 9682 9682
GRAPPLE
Price $1,767 $2,106 $2,106 $2,106 $2,106 $2,106 $2,106 $2,106 $1,960 $1,960
Part No. 532 13202 13202 13202 13202 13202 13202 13202 1334 1334
GRAPPLE
Price $1,531 $1,506 $1,506 $1,506 $1,506 $1,506 $1,506 $1,506 $1,556 $1,556
APPROXIMATE WEIGHT 35 15 15 15 15 16 18 20 15 15
ACTUAL CATCH RANGE
MINIMUM ID 4.874 3.682 3.761 3.823 3.886 4.073 4.214 4.307 4.093 4.234
NOMINAL CATCH SIZE * 4.947 3.782 3.861 3.923 3.986 4.173 4.314 4.407 4.179 4.320
MAXIMUM ID 5.012 3.881 3.958 4.026 4.090 4.276 4.408 4.506 4.276 4.408
OLD NOMINAL SIZE
(GRAPPLES WERE MARKED WITH THIS DESCRIPTION)
5 1/2 4 1/2 4 1/2 4 1/2 4 1/2 5 OD 5 O.D. 5 OD 5 OD 5 OD
14- OD OD OD OD 18.00 - 15.00 - 12.64 - 18 - 15 -
OLD NOMINAL SIZE 17 15.35 - 13.75 - 11.00 - 9.50 - 21 18 15 21 18
TBG 18.1 15.35 13.75 11.6 CSG CSG CSG CSG CSG
TBG TBG TBG CSG
YIELD STRENGTH 530000 725000 725000 725000 725000 725000 725000 725000 920000 920000
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
13 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 81/2008 1/1/2011
Part No. 9682 9682 9682 17236 17236 17236 17236 17236 17236 17236
GRAPPLE
Price $2,350 $2,350 $2,350 $3,502 $3,502 $3,502 $3,502 $3,502 $3,680 $3,680
Part No. 1334 1334 1334 9717 9717 9717 9717 9717 9717 9717
GRAPPLE
Price $2,191 $2,191 $2,191 $2,403 $2,403 $2,403 $2,403 $2,403 $2,556 $2,556
APPROXIMATE WEIGHT 38 38 46 32 32 40 40 48 48 52
ACTUAL CATCH RANGE
MINIMUM ID 5.281 5.375 5.500 5.000 5.093 5.187 5.280 5.406 5.530 5.593
NOMINAL CATCH SIZE * 5.367 5.461 5.586 5.134 5.227 5.321 5.414 5.540 5.664 5.727
MAXIMUM ID 5.454 5.552 5.675 5.266 5.360 5.454 5.547 5.675 5.797 5.860
OLD NOMINAL SIZE
(GRAPPLES WERE MARKED WITH THIS DESCRIPTION)
6 OD 6 OD 6 5/8 OD 6 OD 6 OD 6 OD 6 OD
6 OD 6 5/8 OD 6 5/8 OD
OLD NOMINAL SIZE 17-20 14 -17 32-34 23 -26 20-23 17 -20 10.5 - 14-17
28 - 32 26 - 29
CSG CSG CSG CSG CSG CSG 14 CSGCSG CSG
CSG
YIELD STRENGTH 920000 920000 1175000 1175000 1175000 1175000 1175000 1175000 1175000 1175000
Part No. 17236 17236 17236 17236 17236 17236 17236 17236 17236 17236
GRAPPLE
Price $4,314 $4,314 $4,314 $4,314 $4,314 $4,670 $4,670 $4,670 $4,670 $4,670
Part No. 9717 9717 9717 9717 9717 9717 9717 9717 9717 9717
GRAPPLE
Price $2,928 $2,928 $2,928 $2,928 $2,928 $3,265 $3,265 $3,265 $3,265 $3,265
APPROXIMATE WEIGHT 52 52 52 55 55 77 77 87 87 87
ACTUAL CATCH RANGE
MINIMUM ID 5.656 5.671 5.781 5.796 5.875 5.937 6.015 6.140 6.202 6.281
NOMINAL CATCH SIZE * 5.790 5.805 5.915 5.930 6.009 6.071 6.149 6.274 6.335 6.415
MAXIMUM ID 5.923 5.938 6.049 6.063 6.142 6.204 6.282 6.407 6.469 6.548
OLD NOMINAL SIZE
(GRAPPLES WERE MARKED WITH THIS DESCRIPTION)
6 5/8 7 OD 6 5/8 7 OD 6 5/8 7 OD 7 OD 7 OD 7 OD 7 OD
OLD NOMINAL SIZE OD 38-40 OD 33.7- OD 29 - 26-29 22-26 20-23 17-20
24-28 CSG 20-24 38 17-22 33.7 CSG CSG CSG CSG
CSG CSG CSG CSG CSG
YIELD STRENGTH 1175000 1175000 1175000 1175000 1175000 1175000 1175000 1175000 1175000 1175000
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
14 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
YIELD STRENGTH 972000 972000 972000 972000 972000 972000 972000 972000 972000 972000
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
15 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Part No. 17248 17248 17248 **17248 17248 17248 17248 17248 **17248 *17248
GRAPPLE
Price $7,241 $7,241 $7,241 $14,644 $9,128 $9,128 $9,128 $9,043 $14,644 $14,644
Part No. 9283 9283 9283 **9283 9283 9283 9283 9283 **9283 **9283
GRAPPLE
Price $5,098 $5,098 $5,098 $10,243 $6,669 $6,669 $6,669 $6,669 $10,243 $10,243
APPROXIMATE WEIGHT 180 180 180 255 255 255 255 255 335 335
ACTUAL CATCH RANGE
MINIMUM ID 9.738 9.867 9.225 11.206 10.581 10.832 10.612 10.675 11.643 11.674
NOMINAL CATCH SIZE * 9.900 10.029 9.387 11.369 10.743 10.994 10.774 10.837 11.805 11.837
MAXIMUM ID 10.063 10.192 9.550 11.531 10.906 11.157 10.937 11.000 11.968 12.000
OLD NOMINAL SIZE
(GRAPPLES WERE MARKED WITH THIS DESCRIPTION)
10 3/4 10 3/4 10 3/4 11.5 11 3/4 11 3/4 11 3/4 11 3/4
13 3/8 13 3/8
OD OD OD ID OD OD OD OD
OD OD
OLD NOMINAL SIZE 40 - 32.75 - 71 - CSG 54 - 38 - 60 47 -
96 11.937
55.5 48 76 65 54 CSG 60
11.975 ID
CSG CSG CSG ID CSG
CSG
YIELD STRENGTH 2700000 2700000 2700000 2700000 2700000 2700000 2700000 2700000 2700000 2700000
Part No. **17248 **17248 **17248 **17248 **17248 **17248 **17248 **17248 **17248 **17248
GRAPPLE
Price $14,644 $14,644 $14,644 $15,058 $15,058 $15,058 $17,274 $17,274 $25,177 $25,177
Part No. *9283 *9283 *9283 *9283 *9283 *9283 *9283 *9283 *9283 *9283
GRAPPLE
Price $10,243 $10,243 $10,243 $10,709 $10,709 $10,709 $11,051 $11,051 $16,935 $16,935
APPROXIMATE WEIGHT 378 378 378 470 470 470 650 650 908 1100
ACTUAL CATCH RANGE
MINIMUM ID 12.022 12.393 12.455 13.143 13.312 13.330 15.112 14.925 17.331 18.862
NOMINAL CATCH SIZE * 12.184 12.555 12.617 13.305 13.474 13.492 15.274 15.087 17.493 19.024
MAXIMUM ID 12.347 12.718 12.780 13.468 13.637 13.655 15.437 15.250 17.656 19.187
OLD NOMINAL SIZE
(GRAPPLES WERE MARKED WITH THIS DESCRIPTION)
13 3/8 13 3/8 12 3/4 14 O.D. 13.599 13 5/8 16 OD 16 OD 17 1/2 20 OD
OD OD OD 42 - 57 ID ID 55 - 75 65 - 84 ID 90 -
OLD NOMINAL SIZE 72 - 85 48 - 68 12-3/4 CSG 13.609 CSG CSG CSG CSG 106.5
CSG CSG ID ID CSG
CSG CSG
YIELD STRENGTH 2700000 2700000 2700000 2700000 2700000 2700000 2700000 2700000 2700000 2700000
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
16 16 2300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Unless otherwise indicated, all the strength figures shown are the result of calculations based on yield strength of the material used in the
manufacture of the particular item.
These strength calculations are considered accurate within plus or minus 20% and are intended only as a guide. They do not constitute or
guarantee, actual or implied. In use, appropriate allowance should be made as a safety factor.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 4 2710
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 4 2710
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 4 2710
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Part Numbers
(2) Casing Size (O.D. & Weight)
(3) Top Connection of Bushing
(4) Make, Model, & Number of Packer to be caught
NOTE: When Retrieving a 3.250" Packer from 9 5/8" Casing, No. 18079 Cross-Over Sub is required between
a No. 18088 Stinger and a No. 28204 Bushing.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 4 2710
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 2800
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
TAPER TAPS
5/8 3/4 1 13/16 1 7/8 1 1/4 2 3/8 2 3/8 2 3/8
NOMINAL SIZE
SR SR FJ EUE SR EUE EUE REG IF
OUTSIDE DIAMETER 1 1/2 1 3/4 1 13/16 1.9 2 5/16 2 3/8 3 1/16 3 1/8 3 3/8
1/2 5/8 3/4 1 7/8 1 1/4 2 3/8 2 3/8 2 3/8
TO CATCH 1 1 1/4 1 3/8 PIPE 1 1/2 PIPE OD REG IF
ID ID ID ID CPL HYD
TOTAL LENGTH 16 18 18 18 20 20 27 27 27
DIAMETER SMALLEST WICKER 3/8 1/2 5/8 3/4 3/4 7/8 1 5/8 5/8 1 3/8
DIAMETER LARGEST WICKER 1 1/4 1 1/2 1 5/8 1 3/4 1 3/4 1 7/8 2 5/8 1 5/8 2 3/8
Part No. 25939 14458 15247 25880 14448 25881 25882 15233 15234
COMPLETE ASSEMBLY Weight 11 12 15 16 19 20 23 24 31
Price $879 $941 $941 $941 $996 $996 $1,225 $1,040 $1,323
ADDITIONAL LENGTH Price/Ea $46 $46 $46 $66 $77 $95 $95 $96 $95
2 7/8 2 7/8 3 1/2 3 1/2 3 1/2 4 1/2 4 4 1/2 4 1/2
NOMINAL SIZE REG IF REG FH IF REED FH REG FH
DS
OUTSIDE DIAMETER 3 3/4 4 1/8 4 1/4 4 5/8 4 3/4 5 5 1/4 5 1/2 5 3/4
2 7/8 2 7/8 3 1/2 3 1/2 3 1/2 4 1/2 4 4 1/2 4 IF
REG PIPE REG PIPE IF REED FH REG 4 PIPE
API API 3 1/2 DS 4 1/2
TO CATCH
HYD FH PIPE FH
4 1/2
PIPE
TOTAL LENGTH 27 27 33 33 33 33 36 36 36
DIAMETER SMALLEST WICKER 7/8 1 3/4 1 1 5/8 2 3/16 2 5/16 2 5/16 1 3/4 2 5/8
DIAMETER LARGEST WICKER 1 7/8 2 3/4 2 1/2 3 1/8 3 11/16 3 13/16 3 15/16 3 3/8 4 1/4
Part No. 19487 19488 19489 19490 19491 25883 25884 19492 19493
COMPLETE ASSEMBLY Weight 36 41 56 70 82 90 96 105 120
Price $1,471 $1,553 $1,754 $1,891 $1,891 $2,164 $2,339 $2,467 $2,585
ADDITIONAL LENGTH Price/Ea $96 $99 $99 $99 $99 $104 $104 $104 $104
4 1/2 4 1/2 5 1/2 5 1/2 4 1/2 6 5/8 6 5/8
NOMINAL SIZE
XH IF REG FH IF REG FH
OUTSIDE DIAMETER 6 6 1/8 6 3/4 7 7 3/8 7 3/4 8
4 1/2 4 1/2 5 1/2 5 1/2 5 1/2 6 5/8 6 5/8
XH IF OR OR OR REG FH
TO CATCH 4 1/2 5 9/16 5 9/16 5 9/16 IF
PIPE REG FH IF PIPE
PIPE PIPE
TOTAL LENGTH 36 36 38 38 38 38 38
DIAMETER SMALLEST WICKER 2 7/8 3 1/4 2 1/4 3 5/8 4 1/4 3 4 5/8
DIAMETER LARGEST WICKER 4 1/2 4 3/4 4 5 3/8 6 4 3/4 6 3/8
Part No. 25885 19494 15240 15241 15242 15243 15244
COMPLETE ASSEMBLY Weight 126 132 164 186 198 215 242
Price $2,832 $2,832 $3,207 $3,499 $3,709 $3,883 $4,339
ADDITIONAL LENGTH Price/Ea $108 $108 $119 $125 $125 $135 $139
HOW TO ORDER:
Specify: (1) Number of Assembly
(2) Size of Fish to be caught
(3) Top Connection; Size & Type
(4) Fluted or Non-Fluted Wickers; Same Price
(5) Threaded for Skirt with Skirt Thread Protector; List Price Plus 10%
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 1 3000
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
TABLE OF CONTENTS
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 2 3050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 3050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 2 3100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 2/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 3100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 2 3105
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 3105
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 7 3210
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Code Part Number Code Part Number Code Part Number Code Part Number
A 45516 I 45561 P-1 45588 21778-W 45607
B 45517 J 45507 P-2 45589 21779-W 45608
C 45518 K 45508 W-1 45581 362-W 362
D L 45510 W-2 45582 363-W 363
E 45539 M 45525 W-3 45574 690-W 45623
F 45540 N 45526 W-4 45575 691-W 45624
G 45557 O X-1 45597 666-W 666
H 45558 P X-2 45598 667-W 667
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 7 3210
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Code Part Number Code Part Number Code Part Number Code Part Number
A 45516 I 45561 P-1 45588 21778-W 45607
B 45517 J 45507 P-2 45589 21779-W 45608
C 45518 K 45508 W-1 45581 362-W 362
D L 45510 W-2 45582 363-W 363
E 45539 M 45525 W-3 45574 690-W 45623
F 45540 N 45526 W-4 45575 691-W 45624
G 45557 O X-1 45597 666-W 666
H 45558 P X-2 45598 667-W 667
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 7 3210
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Code Part Number Code Part Number Code Part Number Code Part Number
A 45516 I 45561 P-1 45588 21778-W 45607
B 45517 J 45507 P-2 45589 21779-W 45608
C 45518 K 45508 W-1 45581 362-W 362
D L 45510 W-2 45582 363-W 363
E 45539 M 45525 W-3 45574 690-W 45623
F 45540 N 45526 W-4 45575 691-W 45624
G 45557 O X-1 45597 666-W 666
H 45558 P X-2 45598 667-W 667
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
5 7 3210
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Code Part Number Code Part Number Code Part Number Code Part Number
A 45516 I 45561 P-1 45588 21778-W 45607
B 45517 J 45507 P-2 45589 21779-W 45608
C 45518 K 45508 W-1 45581 362-W 362
D L 45510 W-2 45582 363-W 363
E 45539 M 45525 W-3 45574 690-W 45623
F 45540 N 45526 W-4 45575 691-W 45624
G 45557 O X-1 45597 666-W 666
H 45558 P X-2 45598 667-W 667
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
6 7 3210
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
*Prices furnished for reference. Individual Parts furnished only for repairs made in Houston.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 3 3400
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
*Prices furnished for reference. Individual Parts furnished only for repairs made in Houston.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 3 3400
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
*Prices furnished for reference. Individual Parts furnished only for repairs made in Houston.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 3450
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 1 4000
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
TABLE OF CONTENTS
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 2 4010
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part
(2) Size and Type of Connections, If Other than Standard
Note: Setting Tools are in the Jar Service Kit, but may be purchased separately, if desired.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 4010
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part
(2) Size and Type of Connections, If Other than Standard
Note: Setting Tools are in the Jar Service Kit, but may be purchased separately, if desired.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 4 4019
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 4 4019
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Service Kit do not include Mandrel Body Seal Setting Tool, which must be ordered separately.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 4 4019
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 4 4019
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify:
(1) Name and Number of Assembly or Part
(2) Connections, if Other than Standard
(3) Outside Diameter, If other than Standard
(4) Name and Number of any desired Spares or Extras
Note: *For Oversize, add 5% for each additional 1/4" or portion thereof to O.D. of Mandrel Body,
Mandrel Body Insert, Middle Body, Washpipe Body, and Either Mandrel or Top Sub.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 3 4020
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 3 4020
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 3 4020
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify:
(1) Name and Number of Assembly or Part
(2) Connections, if other than Standard
(3) Outside Diameter, If Other than Standard
(4) Name and Number of any desired Spares or Extras
Note: *For Oversize, add 5% for each additional 1/4" or portion thereof to O.D. of Mandrel Body,
Mandrel Body Insert, Middle Body, Washpipe Body, and either Mandrel or Top Sub.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 3 4022
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 3 4022
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 3 4022
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Note: *For Oversize, add 5% for each additional 1/4" or portion thereof to O.D. of Mandrel Body,
Mandrel Body Insert, Middle Body, Washpipe Body, and either Mandrel or Top Sub.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 4 4065
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 1/1/2011 1/1/2011
*** Piston for 74723 Jar only, is a special one-piece Piston, Cone type.
** Packing sets include all seals necessary to dress Jar. Non-Extrusion Rings and Seal Protector Rings must be ordered separately.
*NOTES:
*For Oversize, add 5% for each additional 1/4" or portion thereof to O.D. of Mandrel Body,
Mandrel Body Insert, Middle Body, Washpipe Body, and Either Mandrel or Top Sub.
Piston Seals are listed with Piston Assemblies & Packing Sets, included with both when ordered separately.
Does not include any Seal Setting Tool, which must be ordered separately as required for each tool.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 4 4065
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
** Packing sets include all seals necessary to dress Jar. Non-Extrusion Rings and Seal Protector Rings must be ordered separately.
*NOTES: When ordering oversize, add 5% for each additional 1/4" of O.D. or portion thereof to Mandrel, Mandrel Body, Middle Body, or
Washpipe Body. Piston Seals are listed with Piston Assemblies & Packing Sets, included with both when ordered separately. Does not include
any Seal Setting Tool which must be ordered separately as required for each tool.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 4 4065
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
*NOTES: When ordering oversize, add 5% for each additional 1/4" of O.D. or portion thereof to Mandrel, Mandrel Body, Middle Body, or
Washpipe Body. Piston Seals are listed with Piston Assemblies & Packing Sets, included with both when ordered separately. Does not include
any Seal Setting Tool which must be ordered separately as required for each tool.
Specify:
(1) Name and Number of Assembly or Part
(2) Connections, if other than Standard
(3) Outside Diameter, if Other than Standard
** Packing sets include all Seals necessary to dress Jar. Non-Extrusion Rings and Seal Protector Rings must be ordered separately.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 4 4065
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Only one Service Kit required for all sizes of tools-does not included any Seal Setting Tool, which must be ordered separately as
required for each tool.
** Packing sets include all Seals necessary to dress Jar. Non-Extrusion Rings and Seal Protector Rings must be ordered separately.
*NOTES: When ordering oversize, add 5% for each additional 1/4" of O.D. or portion thereof to Mandrel, Mandrel Body, Middle Body, or
Washpipe Body. Piston Seals are listed with Piston Assemblies & Packing Sets, included with both when ordered separately. Does not include
any Seal Setting Tool which must be ordered separately as required for each tool.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 4 4100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 4 4100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 4 4100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 4 4100
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: RECOMMENDED SPARES: (1) 2 By-Pass Bodies
(1) Name and Number of Assembly or Part (2) 2 Cones
(2) Connections, if other than Standard (3) 2 Seal Bodies
(3) Outside Diameter, If Other than Standard (4) 1 Washpipe
(4) Name and Number of any desired Spares or Extras (5) 6 Fill Plugs
(6) 1 Floater
Miscellaneous O-Ring Seals are normally furnished in sealed (7) 2 Complete Packing Sets
plastic bags of 10, 25 or 100 pieces each to prevent deterioration. (8) 4 O-Ring Packing Sets
Other quantities will be furnished in unsealed packages.
Packing Sets, however, will always be furnished in sealed plastic bags.
Notes: * When ordering oversize, add 5% for each 1/4" of O.D. or portion thereof to Mandrel Body,
Top Sub, Spline Body, Connector Body, Pressure Body, and Washpipe Body.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 4 4102
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 4 4102
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 4 4102
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 4 4102
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: RECOMMENDED SPARES FOR ONE YEAR PER TOOL
(1) Name, Part Number, and Quantity of Assembly or Part (1) 1 By - Pass Bodies
(2) O.D., I.D., and Connection Size & Type (2) 2 Cones
Label Oversize O.D. and Undersize I.D. if other than Standard. (3) 1 Cone Retainers
(3) With / without Pin Stress Relief Groove & Box Bore-Back Reliefs (4) 2 Seal Bodies
Bowen Pin Stress Relief Groove is Standard where A Pin (5) 1 Pressure Body (F/ One to Ten Tools)
Stress Relief is permitted for the tool O.D. / I.D. combination (6) 8 Fill Plug (or 4 Of Each Size, Eg. 4 3/4" O.D. Tool)
Api Pin Stress Relief Groove can be supplied if specified. (7) 1 Floater
Box Bore-Back is not Standard but can be supplied if specified. (8) 12 Complete Packing Sets
(4) Any desired Spare Parts, Accessories, and Extras (9) 4 O-Ring Packing Sets
Include above information, items 1 through 3, for each part ordered.
(5) Note: Thread Protectors are extra, see listing elsewhere in Price Book. NOTE 2:
* NOTE: 1: Miscellaneous O-Ring Seals are normally furnished
When ordering Oversize O.D., add 5% for each 1/4" of O.D. in sealed plastic bags with one (1) O-Ring per bag to
or portion therof to Spline Body, Mandrel Body, Mandrel, prevent deterioration.
Connector Body, Pressure Body, and Washpipe Body. O-Ring Packing Sets are in sealed plastic bags.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 4300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 3 4445
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
* Only one Service Kit required for all sizes of tools - does not include Seal
Setting Tool, which must be ordered separately as required for each tool.
** 41490 assembly does not use a Mandrel Ring or Mandrel Assembly.
***Mandrel and Washpipe are A 1-piece assembly
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 3 4445
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 3 4445
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 6 4460
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER: (1) Complete Assembly and Part Number RECOMMENDED SPARES:
Specify: (2) Size Connection (1) 8 Non-Extrusion Rings
(3) Length of Stroke (2) 8 Seal Protector Rings
(3) 16 Knocker Seals
SPECIAL NOTE: Standard stroke for Bumper Subs is 20". See Sheets 2, 4, and 6 for strokes greater than 20".
Only the Mandrel and Middle Body need be ordered to convert a standard 20" stroke to one of greater stroke.
All other parts interchange for a given size. When a long stroke assembly is ordered by assembly number, the entire tool is ordered.
To convert, order only the Mandrel and Middle Body by number.
*For Oversize: Add 10% for each additional 1/4" or portion thereof to the price of the Mandrel Body, Middle Body, Mandrel and Top Sub.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 6 4460
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER: (1) Complete Assembly and Part Number RECOMMENDED SPARES:
Specify: (2) Size Connection (1) 8 Non-Extrusion Rings
(3) Length of Stroke (2) 8 Seal Protector Rings
(3) 16 Knocker Seals
SPECIAL NOTE: Standard stroke for Bumper Subs is 20". See Sheets 2, 4, and 6 for strokes greater than 20".
Only the Mandrel and Middle Body need be ordered to convert a standard 20" stroke to one of greater stroke.
All other parts interchange for a given size. When a long stroke assembly is ordered by assembly number, the entire tool is ordered.
To convert, order only the Mandrel and Middle Body by number.
*For Oversize: Add 10% for each additional 1/4" or portion thereof to the price of the Mandrel Body, Middle Body, Mandrel and Top Sub.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 6 4460
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 6 4460
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
SPECIAL NOTE: Standard stroke for Bumper Subs is 20". See Sheets 2, 4, and 6 for strokes greater than 20".
Only the Mandrel and Middle Body need be ordered to convert a standard 20" stroke to one of greater stroke.
All other parts interchange for a given size. When a long stroke assembly is ordered by assembly number, the entire tool is ordered.
To convert, order only the Mandrel and Middle Body by number.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
5 6 4460
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
6 6 4460
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Only the Mandrel and Middle Body need be ordered to convert a standard 20" stroke to one of greater stroke.
All other parts interchange for a given size. When a long stroke assembly is ordered by assembly number, the entire tool is ordered.
To convert, order only the Mandrel and Middle Body by number.
SPECIAL NOTE: Standard stroke for Bumper Subs is 20". See Sheets 2, 4, and 6 for strokes greater than 20".
*For Oversize: Add 10% for each additional 1/4" or portion thereof to the price of the Mandrel Body, Middle Body, Mandrel and Top Sub.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 2 4605
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Complete Assembly and Part Number
(2) Size Connection
(3) Name and Number of any Desired Spares
**NOTE: LEFT HAND CONNECTIONS ON REQUEST
* Price on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 4605
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
O.D. OF JOINT 4 4 1/2 5 3/8 5 3/8 5 3/4 7 5/16 7 3/8 8 8 5/32 9 3/8
BORE OF JOINT 1 1/4 1 1/4 2 1/8 2 9/16 2 7/16 3 3/4 3 3 3/4 3 8/32 4
Part No. 149478 149482 149486 149490 149494 149498 149502 149506 149510 149514
COMPLETE ASSEMBLY Weight 42 50 54 58 141 103 339 135 439 210
Price * $6,113 * $9,870 $9,123 * * $17,316 $13,071 *
HOW TO ORDER:
Specify: (1) Complete Assembly and Part Number
(2) Size Connection
(3) Name and Number of any Desired Spares
**NOTE: LEFT HAND CONNECTIONS ON REQUEST
* Price on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 4 4810
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
For Oversize, add 10% to the price (Head Connection, Main Body, Pivot Body, And Bottom Sub)
for each additional 1/4" portion thereof.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 4 4810
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 4 4810
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
For Oversize, add 10% to the price (Head Connection, Main Body, Pivot Body, And Bottom Sub)
for each additional 1/4" portion thereof.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 4 4810
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part
(2) Name and Number of Any Desired Spares
(3) O.D., if Other than Standard
(4) Connections, if Other than Standard
For Oversize, add 10% to the price (Head Connection, Main Body, Pivot Body, And Bottom Sub)
for each additional 1/4" portion thereof.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 5000
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
TABLE OF CONTENTS
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 1 5010
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Assembly
(2) Connection, Size, and Type, if Other than Standard
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 5050
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
CROSSOVER SUBS
TYPES: PIN TO PIN, BOX TO BOX, OR PIN TO BOX
ALLOY STEEL, HEAT TREATED, THREADED
LARGEST O.D. 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3 1/4 3 1/2 3 3/4
Part No. 73698 73699 73700 73701 73702 73703 73704 73705 73706 73707
CROSSOVER SUB MINIMUM
10 10 10 10 10 10 10 10 10 10
BASE LENGTH
Price $500 $564 $583 $583 $601 $615 $628 $628 $698 $729
ADDITIONAL PER INCH Price $15.50 $19.70 $22 $23 $24 $26 $26 $26 $26 $29
LARGEST O.D 6 1/2 6 3/4 7 7 1/4 7 1/2 7 3/4 8 8 1/4 8 1/2 8 3/4
Part No. 73718 73719 73720 73721 73722 73723 73724 73725 73726 73727
CROSSOVER SUB MINIMUM
12 12 12 14 14 14 14 14 14 14
BASE LENGTH
Price $1,106 $1,179 $1,215 $1,396 $1,480 $1,535 $1,645 $1,681 $1,745 $1,899
ADDITIONAL PER INCH Price $42 $46 $46 $53 $59 $64 $69 $77 $77 $86
LARGEST O.D 11 1/2 11 3/4 12 12 1/4 12 1/2 12 3/4 13 13 1/4 13 1/2 13 3/4
Part No. 73738 73739 73740 73741 73742 73743 73744 73745 73746 73747
CROSSOVER SUB MINIMUM
16 16 16 16 16 16 16 16 16 16
BASE LENGTH
ce
Price $ ,933
$4,933 $5, 90
$5,190 $5,
$5,271 $5, 6
$5,426 $5, 0
$5,710 $5, 83
$5,783 $6, 03
$6,103 $6, 3
$6,213 $6,5
$6,541 $6,58
$6,587
ADDITIONAL PER INCH Price $208 $208 $228 $228 $237 $245 $263 $263 $278 $278
LARGEST O.D 14
Part No. 73748
CROSSOVER SUB MINIMUM
16
BASE LENGTH
Price $7,035
ADDITIONAL PER INCH Price $301
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 5060
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
SPECIFY: (1) Name and Number of Assembly or Part
(2) Connections, if other than Standard
(3) O.D., if Other than Standard
(4) Name and Number of any desired Options, Extras, or Spares
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 5070
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part
(2) Connections, if other than Standard
(3) O.D., if Other than Standard
(4) Name and Number of any desired Options, Extras, or Spares
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 5200
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 5250
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Bowen Itcoloy contains the maximum desired concentration of fragmented sintered Tungsten carbides interspersed
in a tough resilient matrix. The carbides used are all steel cutting grades with a hardness of 91 to 93 Rockwell "A".
The matrix is a special nickel-silver alloy with a tensile strength of 100,000 P.S.I. Bowen Itcoloy is packed in cartons
of approximately ten pounds each and is available in the following graded sizes.
Part No. 145723 145720 145721 145724 145722 145728 145726 145727
NOMINAL SIZE 3/8 3/16 1/8 1/4 5/16 10-18 18-30 30-45
3/8 TO 3/16 TO 1/8 TO 1/4 TO 5/16 TO 10 TO 18 TO 30 TO
1/4 1/8 1/16 3/16 1/4 18 30 45
GRADED PARTICLE SIZE
SCREEN SCREEN SCREEN
MESH MESH MESH
3/8 X 1/4 X 1/4 X 1/4 X 3/16 X 3/16 X
ROD SIZE 3/8 X 3/16 X 3/16 X 3/16 X 3/16 X 3/16 X
18 18 18 18 18 18
APPROXIMATE WEIGHT PER 14 7/8 10 5/8 9 1/2 7 1/4 5 1/2 5 1/4
BOWEN ITCOLOY-QUANTITY PRICES
LESS THAN 10 LBS. Price/Lb. $65
Bowen Tinning Rod is a specially compounded flux-coated, nickel-silver brazing alloy particularly suited as a base for Bowen Itcoloy. Bowen Tinning
Rod produces a Corrosion-Resistant weld deposit with a tensile strength of 100,000 P.S.I. and a hardness of 160-170 Brinell. Bowen Tinning Rod is
packed in cartons of approximately ten pounds each. Bowen Tinning Rod should be ordered in quantities approximately 20% of the Bowen Itcoloy
order.
Bowen Brazing Flux is a specially compounded braze-welding flux to prepare the surface of the base metal for
the application of Bowen Tinning Rod and Bowen Itcoloy, Bowen Brazing Flux is packed in cans of approximately
one pound each. Bowen Brazing Flux should be ordered in quantities approximately 2% of the Bowen Itcoloy order.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 2 5322
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
5 5/8- 5 7/8- 6 1/8- 6 3/8- 6 5/8- 6 7/8- 7 1/8- 7 3/8- 7 5/8- 7 7/8-
MILL SIZE (O.D.)
5 3/4 6 6 1/4 6 1/2 6 3/4 7 7 1/4 7 1/2 7 3/4 8
3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 4 1/2 4 1/2 4 1/2
TOP CONNECTION-PIN
REG REG REG REG REG REG REG REG REG REG
Part No. 41641 41647 41647 41647 41653 41653 41653 41659 41659 41659
JUNK MILL Weight 22 25 26 27 31 32 33 39 40 41
Price $1,861 $1,963 $2,132 $2,233 $2,343 $2,419 $2,605 $2,724 $2,843 $2,961
Part No. 41941 41947 41947 41947 41953 41953 41953 41959 41959 41959
ROUND NOSE MILL
Weight 34 39 38 39 49 50 51 79 80 81
(60° INCLUDED ANGLE)
Price $2,410 $2,530 $2,613 $2,843 $2,952 $3,147 $3,257 $3,460 $3,637 $3,713
Part No. 42001 42002 42002 42002 42003 42003 42003 42004 42004 42004
TAPER MILL
Weight 42 52 52 53 65 65 65 108 110 112
(30° INCLUDED ANGLE)
Price $3,308 $3,424 $3,713 $3,832 $3,985 $4,145 $4,340 $4,425 $4,568 $4,729
Part No. 42029 42029 42029 42029 42029 42029 42029 42030 42030 42030
ABOVE MILLS WITH 10" LARGE
Weight 35 35 35 35 35 35 35 62 62 62
SUB FISHING NECK O.D. EXTRA
4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 5 3/4 5 3/4 5 3/4
CHARGE
Price $635 $635 $635 $635 $635 $635 $635 $871 $871 $871
SPECIAL TOP CONNECTION
EXTRA CHARGE Price $232 $232 $232 $268 $268 $268 $268 $297 $297 $342
HOW TO ORDER:
Specify: (1) Name and Number of Mill
(2) O.D. of Mill
(3) Top Connection, if Other than Standard
(4) If Fishing Neck is Desired, Order Mill and Fishing Neck by Number
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 5322
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Mill
(2) O.D. of Mill
(3) Top Connection, if Other than Standard
(4) If Fishing Neck is Desired, Order Mill and Fishing Neck by Number
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 2 5500
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 5500
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
LOAD TO SHEAR EACH SHEAR PIN 280 285 637 285 637 637 637 637 637
DOUBLE SHEAR STRENGTH 570 570 1,275 570 1,275 1,275 1,275 1,275 1,275
LOAD TO SHEAR EACH SLIP BOWL SHEAR PIN 4,125 4,125 4,125 8,285 8,285 8,285 8,285
QUADRUPLE SHEAR STRENGTH 16,500 16,500 16,500 33,150 33,150 33,150 33,150
NOTES:
(1) Assembly price includes One Spring Dog Assembly; Price differs with Ratchet Pawl or Slip Assembly
(2) Connections other than A.P.I. will be priced on request.
HOW TO ORDER: RECOMMENDED SPARES:
Specify: (1) Name and Number of Assembly or Part (1) 2 Sets Knife Pins
(2) Size and Type of Top Connection (2) 1 Feed Ring
(3) Any Desired Options by Name and Number (3) 24 Shear Pins
(4) Any Desired Spares by Name and Number (4) 6 Sets Knives
(5) 2 Spring Dog Ratchet Pawl or Slip Assemblies
(6) 1 Set Knife Pin Screws
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 2 5550
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 5550
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part
(2) Size and Type of Top Connection
(3) Name and Number of any Desired Options or Spares
RECOMMENDED SPARES:
(1) 2 Piston Assemblies
(2) 1 Feed Ring
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 6 5600
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 6 5600
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 6 5600
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 6 5600
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
** Priced on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
5 6 5600
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
ASSEMBLY NUMBER 8200 14785 14785 8745 8745 8745 15532 15080 15080 21240
CAN BE DRESSED TO CUT 5 1/2 6 5/8 7 7 5/8 8 8 1/8 9 5/8 10 3/4 11 3/4 18 5/8
ADDITIONAL SIZES BY OD OD OD OD OD OD OD OD OD OD
CHANGING PARTS LISTED CSG CSG CSG CSG CSG CSG CSG CSG CSG CSG
REPLACEMENT PARTS
Part No. 8242 14802 8749 8749 8749 15541 15083 15116
TOP THRUST
Price $1,218 $1,379 $1,421 $1,421 $1,421 $1,785 $1,827 $1,827
Part No. 8405 14803 29499 8764 15408 15408 15551 15088 15079 21672
SLIP (3 REQUIRED)
Price/Ea $356 $391 $502 $502 $502 $502 $558 $571 $617 $1,345
Part No. 8219 14818 20982 8770 15407 15407 15554 15101 15078 21671*
WIPER BLOCK (3 REQUIRED)
Price/Ea $252 $337 $369 $369 $401 $401 $467 $475 $518 $576
Part No. 8207 8249 8249 8249 8249 15109 15109 15129
DRAG SPRING (3 REQUIRED)
Price/Ea $405 $65 $65 $65 $65 $311 $311 $88
Part No. 8234 14817 36498 8774 15405 15405 15552 15268 15077
BOTTOM NUT***
Price $369 $593 $662 $930 $1,014 $1,014 $1,582 $1,675 $1,819
Part No.
KNIFE BLOCK
Price/Ea
Part No. 14816 14816 15549 15116
TOP THRUST CUT COUPLING
Price $766 $766 $1,074 $1,371
Part No. 15406 15406 21673
KNIFE (5 REQUIRED)
Price/Ea $361 $361 $371
Notes:
*6 Required for Assemblies 21240 and 19760
***These oversize Bottom Nuts are available where centralizing is required.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
6 6 5600
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
SPECIAL NOTES: (1) Slip No. 1924 is for 15 lb. to 21 lb. 5" CSG., for 11.5 lb. to 13 lb. 5" CSG., Use Slip No. 8405.
(2) *Where both Wiper Block and Drag Spring Parts are shown, the Cutter can be ordered
with either.
(3) ***These oversize Bottom Nuts are available where centralizing is required.
HOW TO ORDER:
Specify: (1) Name & Number of Assembly or Part
(2) Size of Pipe to be Cut
(3) Whether or not Bottom Nut is to be Fitted for a Bowen Collar Finder
(4) Knives w/carbide tips add $28.00 for 8177C, 15102C, 8432C, and 8572C only.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 2 5680
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
HOW TO ORDER:
Specify : (1) Size Connection
(2) O.D. of Pipe
(3) Length of Knives ( When Making Multiple Cuts, Please Specify All Knife Lengths to be Used)
(4) Dressed or Undressed Knives When Ordering
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 5680
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 6000
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
TABLE OF CONTENTS
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 2 6200
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 6200
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 6255
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
RECOMMENDED MINIMUM AND MAXIMUM CASING RANGES FOR FULL CIRCLE CASING SCRAPERS
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 6300
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
** Price on Request
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 2 6400
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
If Bowl, Guide, or Top Sub is left oversize, add 20% for the first 1/4" or portion thereof.
Add an additional 10% for each additional 1/4" or portion thereof.
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part
(2) Casing Outside Diameter
(3) Size and Type of Thread
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 6400
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
If Bowl, Guide, or Top Sub is left oversize, add 20% for the first 1/4" or portion thereof.
Add an additional 10% for each additional 1/4" or portion thereof.
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part
(2) Casing Outside Diameter
(3) Size and Type of Thread
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 2 6460
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
If Bowl, Guide, or Top Sub is left oversize, add 20% for the first 1/4" or portion thereof.
Add and additional 10% for each additional 1/4" or portion thereof.
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part
(2) Casing Outside Diameter
(3) Size and Type of Thread
*This size available for H2S service, complete assembly number 146503, Price: $8660.00.
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 6460
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
If Bowl, Guide, or Top Sub is left oversize, add 20% for the first 1/4" or portion thereof.
Add and additional 10% for each additional 1/4" or portion thereof.
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part
(2) Casing Outside Diameter
(3) Size and Type of Thread
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 6480
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
CASING SIZE 5 1/2 5 1/2 7 7 9 5/8 9 5/8 10 3/4 10 3/4 13 3/8 13 3/8
CASING PATCH O.D. 7 21/32 6 13/16 8 5/16 8 5/16 11 3/4 11 1/8 14 3/8 12 5/16 17 15 1/8
EXTENSION O.D. 7 6 13/16 8 5/16 8 5/16 11 3/4 11 1/8 13 3/8 12 3/8 16 15 1/8
TYPE OF EXTENSION CSG ALLOY CSG ALLOY CSG ALLOY CSG ALLOY CSG ALLOY
LENGTH OF EXTENSION 10 10 10 10 10 10 10 10 10 10
TYPE OF CASING PATCH PACKER PACKER PACKER PACKER PACKER PACKER PACKER PACKER PACKER PACKER
Part No. 47778 47772 44960 47767 45000 47758 47736 47730 43379 40398
COMPLETE ASSEMBLY Weight 500 455 400 730 1130 1145 1625 1325 1300 1980
Price * * * * * * * * * *
REPLACEMENT PARTS
Part No. 47779 47773 44961 47768 45001 47759 47737 47731 43378 40399
TOP SUB Weight 40 40 62 62 100 130 160 120 230 175
Price $1,226 $1,040 $1,592 $1,592 $3,005 $2,989 $4,328 $3,459 $7,772 $4,434
Part No. 568257 568264 568264 568275 568274 568276 568280
TOP SUB SEAL Weight 1/32 1/32 1/32 1/32 1/32 1/16 1/16
Price/Ea $9.35 $10.40 $10.40 $17.20 $15.35 $23 $31
Part No. 47780 47774 44962 47769 45002 47760 47738 47732 43377 48311
TOP EXTENSION Weight 347 290 130 500 250 770 1060 920 390 1440
Price $2,416 $5,013 $5,125 $8,983 $5,289 $20,263 $7,694 $20,161 $11,279 $30,374
Part No. 47781 44966 45005 47739 43380
ADAPTER SUB Weight 50 55 40 115 210
Price $1,125 $1,345 $2,410 $3,993 $5,617
Part No. 568257 568264 568274 568276 568280
ADAPTER SUB SEAL Weight 1/32 1/32 1/32 1/16 1/16
Price/Ea $9.35 $10.40 $15.35 $23 $31
Part No. 11226 11226 11241 11241 11256 11256 11261 11261 41061 41061
PACKER Weight 1/4 1/4 1/4 1/4 1/4 1/4 1/2 1/2 1/2 1/2
Price $97 $97 $105 $105 $132 $132 $226 $226 $369 $369
Part No. 47782 47776 44964 47770 45004 47761 47740 47734 41060 48337
PACKER PROTECTOR Weight 30 35 37 45 52 44 60 25 145 145
Price $804 $520 $930 $560 $1,768 $594 $2,199 $1,278 $3,147 $1,556
Part No. 47783 47777 46088 47771 46097 47762 47741 47733 43383 27671
SHEAR PIN
Weight 1/16 1/16 1/16 1/16 1/8 1/8 1/4 1/4 1/4 1/4
(4 REQUIRED)
Price/Ea $9.70 $9.70 $9.70 $9.70 $9.70 $9.70 $9.70 $9.70 $9.70 $9.70
Part No. 10641 10641 36478 36478 36478 36478 10641 10641 36478 36478
SHEAR PIN PLUG
Weight 1/16 1/16 1/16 1/16 1/8 1/8 1/4 1/4 1/4 1/4
(4 REQUIRED)
Price/Ea $1.55 $1.55 $3.70 $3.70 $3.70 $3.70 $1.55 $1.55 $3.70 $3.70
Part No. 11463 11463 11469 11469 11475 11475 11477 11477 41039 41039
MILL CONTROL PACKER Weight 3 3 4 4 8 8 10 10 20 20
Price $602 $602 $683 $683 $1,362 $1,362 $1,718 $1,718 $2,834 $2,834
Part No. 11228 11228 11243 11243 11258 11258 11263 11263 41037 41037
BASKET GRAPPLE Weight 12 12 15 15 20 20 30 30 25 25
Price $973 $973 $1,252 $1,252 $2,302 $2,302 $2,708 $2,708 $4,145 $4,145
Part No. 47775 47775 44963 44963 45003 45003 47735 47735 41036 41036
BOWL Weight 40 40 47 47 79 79 90 125 125 125
Price $2,596 $2,596 $3,054 $3,054 $4,314 $4,314 $5,617 $5,617 $8,290 $8,290
Part No. 11229 11229 11244 11244 11259 11259 11264 11264 41040 41040
GUIDE Weight 40 40 50 50 90 90 90 90 130 130
Price $712 $712 $923 $923 $1,807 $1,807 $2,142 $2,142 $3,563 $3,563
Part No. 568257 568264 568275 568274 568276 568280
TOP EXTENSION SEAL Weight 1/16 1/16 1/16 1/16 1/16 1/16
Price/Ea $9.35 $10.40 $17.20 $15.35 $23 $31
HOW TO ORDER:
Specify: (1) Name and Number of Assembly or Part
(2) Connection Size and Type
(3) Type of Casing Patch
(4) Casing Size to be Patched
(5) Length and O.D. of Extension, if Other than Standard
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 1 8000
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
TABLE OF CONTENTS
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
k
SHEET OF SECTION NO.
1 2 8200
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 2 8200
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 2 8250
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 1 8820
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
1 4 8890
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
2 4 8890
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
3 4 8890
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com
SHEET OF SECTION NO.
4 4 8890
SUPERSEDES REVISED
BOWEN TOOLS PRICE BOOK 8/1/2008 1/1/2011
SINKER BARS
BOWEN SINKER BARS
OUTSIDE DIAMETER 1 1 1/8 1 1/4 1 1/2 1 5/8 1 3/4 2 1/8 1 11/16 2 1/8
3/4 5/8 15/16 15/16 3/4 3/4 7/8
TOP CONNECTION-PIN
10 THD 11 THD 10 THD 10 THD SR SR SR
3/4 5/8 15/16 15/16 3/4 3/4 7/8
BOTTOM CONNECTION - BOX
10 THD 11 THD 10 THD 10 THD SR SR SR
TYPE WITHOUT FISHING NECK
COMPLETE ASSEMBLY Part No 29089 35599 12725 12726 12723 12727 12728 12722 12729
2' LENGTH Weight 5 6 8 1/2 12 14 16 24
Price $156 $156 $156 $156 $198 $309 $341 * *
Part No 29089 35599 12725 12726 12723 12727 12728
3' LENGTH Weight 7 10 12 18 21 24 36
Price $177 $177 $177 $177 $218 $324 $383
Part No 29089 35599 12725 12726 12723 12727 12728
4' LENGTH Weight 10 13 16 1/2 24 28 32 48
Price $195 $195 $195 $195 $248 $379 $429
Part No 29089 35599 12725 12726 12723 12727 12728
5' LENGTH Weight 13 16 20 29 35 40 60
Price $215 $215 $215 $215 $256 $420 $463
Part No 29089 35599 12725 12726 12723 12727 12728
6' LENGTH Weight 15 20 24 35 42 48 72
Price $234 $234 $234 $234 $274 $450 $517
BOWEN SINKER BARS
OUTSIDE DIAMETER 1 1 1/8 1 1/4 1 1/2 1 3/4 2 1/8
5/8 5/8 15/16 15/16 3/4 7/8
TOP CONNECTION-PIN
11 THD 11 THD 10 THD 10THD SR SR
5/8 5/8 15/16 15/16 3/4 7/8
BOTTOM CONNECTION - BOX
11 THD 11 THD 10 THD 10THD SR SR
TYPE WITH FISHING NECK
COMPLETE ASSEMBLY Part No 15789 35600 12660 12661 12662 12663
2' LENGTH Weight 4 7 8 1/2 12 16 1/2 24
Price $185 $185 $185 $185 $350 $382
Part No 15789 35600 12660 12661 12662 12663
3' LENGTH Weight 6 10 12 18 24 1/2 36
Price $206 $206 $206 $206 $365 $424
Part No 15789 35600 12660 12661 12662 12663
4' LENGTH Weight 8 13 1/2 16 1/2 24 33 48
Price $224 $224 $224 $224 $421 $470
Part No 15789 35600 12660 12661 12662 12663
5' LENGTH Weight 10 17 21 30 41 60
Price $249 $249 $249 $249 $461 $504
Part No 15789 35600 12660 12661 12662 12663
6' LENGTH Weight 12 20 25 36 49 72
Price $257 $257 $257 $257 $491 $557
Copyright 2011 National Oilwell DHT, L.P. - Rev A Prices are in United States Dollars ($ USD) dht.customerservice@nov.com