Professional Documents
Culture Documents
Method Statement-Transfomer Lifting Work
Method Statement-Transfomer Lifting Work
Method Statement-Transfomer Lifting Work
Document description:
M&E Method Statement
Document title :
PREPARED BY REVIEWED BY
Signature : Signature :
Name : Name :
Designation: : Designation:
Date: Date:
CONTENTS :
1.0 PURPOSE
2.0 REFERENCES
1. TRANSFORMER
8.0 HIRAC
1.0 PURPOSE
This method statement provides information concerning the equipment, material and
method of construction to ensure compliance with contract requirements, drawings,
technical specification and quality control
2.0 REFERENCES
a. As Built drawings
b. Site marked location.
b. The continuity test and insulation resistance on the cable shall be carried out
to make sure that the cable are in good condition and no faulty or leakage
current along the line.
All operation during this work will be done in an efficient and safe manner and in
accordance to the Safety Procedures.
However there are issues concerning safety for this work that are to be observed
base on the results of the audit, relevant safety measures shall be proposed and
implemented as follows:-
a. Carry out a Hazard Identification Audit (HIA) before start of work each day and
before the start of a new task.
b. Basic Safety harness, shoe, helmet, glove, goggle should wear during work on
progress, depend on type of event.
c. Safety briefing to workers every subsequent time and the installation is monitor
by competent person.
f. All materials shall be transported by lorry to the site. Upon arrival, the materials
shall be unloaded at identified storage yard, either manually or by machinery. All
material shall be checked and inspected by the supervisor and consultant. It
must be stacked on timber and cover with non-staining plastic sheet.
g. The material shall be in good condition, clean and free from defect and crack
during the installation.
h. During works on progress, any unsafe event shall stop immediately and report to
the safety office & competent person, or in-charge personal.