Professional Documents
Culture Documents
Fosc 3 Reviewer Midterms Finals
Fosc 3 Reviewer Midterms Finals
Fosc 3 Reviewer Midterms Finals
Drug chemists analyze drug samples, conduct tests, and interpret results. They may also testify
as expert witnesses in court.
QUANTITATIVE ANALYSIS:
This measures the exact amount of a substance in a sample, such as determining the
concentration of alcohol in a blood sample for DUI cases.
3. CONFIRMATORY TEST
Confirming the presence of a specific drug using more advanced techniques.
CONFIRMATORY TESTS
A. THIN LAYER CHROMATOGRAPHY (TLC):
TLC separates and identifies compounds in a mixture. For example, TLC can be used to confirm
the presence of multiple drugs in a seized powder.
WEEK 8 EXPLOSIVES
EXPLOSIVES
An explosive refers to a substance containing a large amount of stored energy, which is capable
of undergoing a rapid chemical reaction.
This reaction releases super heated gases that expand with great force and does not require
atmospheric oxygen to sustain combustion.
In several bombing incidents, it has been found that the commonly used explosive device is the
incendiary explosive device (IED). Its popularity could be due to the ubiquity of materials for its
production and its low cost without compromising its effectiveness as a bomb.
explosives are reactive substances containing great amount of potential that—if released
suddenly—can produce an explosion, usually accompanied by the production of light, sound,
heat, and pressure. The quantity of an explosive material is measured through its explosive
charge.
HISTORY OF EXPLOSIVES
CHINESE
Approximately 1,000 years ago, they invented the first chemical explosive called gunpowder
(also called black powder). It consisted of a mixture of charcoal, sulfur, and potassium nitrate (or
saltpeter).
For hundreds of years, gunpowder was mainly used to create fireworks and the Chinese did not
use it as a weapon of war until after Europeans began using it to shoot stones and projectiles
from tubes as well as metal balls from guns and cannons.
The Europeans may have learned about gunpowder from travelers coming from the Middle East. In
fact, in the West, gunpowder was used more for wars than for fireworks by the early 13th century. The
English and the Germans also began to manufacture gunpowder in the early 1300s. It remained the only
explosive for 300 hundred years, until 1628, when another explosive, called fulminating gold, was
discovered.
KINDS OF EXPLOSIVE
Explosives are generally classified into two categories, namely, low, and high explosives.
LOW EXPLOSIVES
burn at a much slower rate and create less pressure.
Low explosives are typically used as propellants to send a rocket into space or force a bullet out
of a gun.
Low explosives consist of a combustible substance and an oxidant that burns (deflagrates) at
speed levels that range from a few cm/sec to 400 m/ sec.
Low explosives combine a combustible substance and an oxidant at sufficient temperature, thus
releasing heat and rapidly expanding gases.
Low explosives work the same way as burning wood or coal, and the burning occurs with more
or less speed depending on the amount of oxygen in the surrounding.
For many years, black powder or gunpowder has been used as the most common low explosive
throughout the world.
HIGH EXPLOSIVES
chemicals that explode faster than the Speed of sound comprise high explosives.
high explosives detonate instantaneously, burn more rapidly, and create more pressure.
In any explosive, one or many of these reactions may occur, thus releasing large energy levels.
Known as the "blasting oil," nitroglycerine was the first high explosive used in commercial blasting. It
is considered dangerous because it is an unstable chemical.
PRIMARY EXPLOSIVES
Explosives can also be categorized according to their sensitivity, that is, sensitive materials that
can be exploded by a smaller amount of pressure or heat are called primary explosives,
while materials that remain relatively insensitive are called secondary explosives.
DYNAMITE CONTENTS
Nitroglycerin or NG
EGDN (ethylene glycol dinitrate)
Sawdust wrapped in buff, red, white, or orange wax paper
Support compounds
Ammonia-gelatin
STRAIGHT DYNAMITE
Its NG content makes it the most dangerous type of dynamite to handle and store
NG vapor is quickly absorbed, thus causing severe headache
Produces toxic fumes that make them unsuitable for underground or confined space blasting
Handler should be extremely cautious if NG content is leaking
Sodium nitrate is often added to it to supply oxygen and increase strength
Has a velocity of 17,000 psi
Has a heavy odor that is pungent yet sweet
AMMONIA DYNAMITE
Has a tan to light brown color
Lower cost and less sensitive than straight dynamite
Portion of NG is replaced by ammonia and sodium nitrate
Percentage strength ranging from 5% to 70%
Pushing heavy effect
Detonation velocity ranging from 3,600 to 13,000 fps
Possesses same odor effect as straight dynamite and may cause headaches resulting from the
NG base
GELATIN DYNAMITE
Detonation velocities up to 23,600 fps
Percentage strength ranging from 20% to 1000/0
Unconfined, lower percentage strength that can detonate at 7,000 fps; confined percentage
strength of up to 13,000 fps
Consists of water-resistant gel made of sodium, nitrocellulose, and nitroglycerine
Suitable for wet blasting on tough rock or ore
Has a semi-gel consistency with properties shared with ammonia and ammonia-gelatin
dynamites
TYPES OF EXPLOSION
MECHANICAL —
This type of explosion is caused by the expansion of gas that produces high pressure beyond the
capacity of the container.
ATOMIC OR NUCLEAR —
This type of explosion results from the atomic transformation of atomic elements. It undergoes
three stages as follows:
CHEMICAL —
This type of explosion is produced through the extremely rapid transformation of unstable
substances accompanied by heat formation.
DETONATION
refers to a violent explosion resulting from the practically instantaneous combustion or
decomposition of unstable compounds.
EFFECTS OF EXPLOSION
1. HEAT THERMAL EFFECT (INCENDIARY) — 3000°C — 4000°C
2. BLAST PRESSURE EFFECT= 1/ 10,000 of a second (hot expanding gas)
PARAFFIN TEST
The Paraffin Test, also known as the GSR test, is a forensic examination that identifies gunshot
residue (GSR) on an individual's hands and clothing.
GSR comprises small particles like burnt and unburnt gunpowder, as well as metallic elements
such as lead, barium, and antimony.
GUNPOWDER
Gunpowder is the propellant used in firearms, responsible for launching projectiles.
Example: In firearms, gunpowder undergoes combustion, producing a rapidly expanding gas that
propels a bullet down the barrel and out of the firearm.
TYPES OF GUNPOWDER
BLACK POWDER:
An example is the classic "black powder," which is a mix of potassium nitrate, charcoal, and
sulfur.
SMOKELESS POWDER:
Smokeless powder is commonly used in modern firearms to reduce the visible residue. An
example of a smokeless powder is nitrocellulose-based powder.
WEEK 10 TOXICOLOGY
TOXICOLOGY
Toxicology is the study of the adverse effects of chemicals and physical agents on living
organisms. It is a broad field that encompasses many different disciplines, including chemistry,
biology, medicine, and environmental science.
Toxicologists work to understand how chemicals and physical agents interact with the body and
how they cause harm. They also develop methods to detect and measure the levels of these
chemicals and physical agents in the body and in the environment.
HISTORY OF TOXICOLOGY
Toxicology is one of the oldest scientific disciplines. Humans have been aware of the dangers of
poisons for thousands of years. The earliest written records of toxicology date back to ancient
Egypt and Mesopotamia.
In the 16th century, the Swiss alchemist Paracelsus is credited with laying the foundation for
modern toxicology. He proposed the famous principle of toxicology, "All things are poison, and
nothing is without poison; the right dose differentiates a poison and a remedy."
Toxicology has continued to evolve over the centuries, and today it is a complex and
sophisticated field of study.
Toxicologists use a variety of scientific methods to study the effects of chemicals and physical
agents on living organisms.
Blood
Urine
Tissue
Gastric contents
Hair
Nails
Bile
Cerebrospinal fluid
Vitreous humor (fluid in the eye)
Stomach contents
The type of sample that is collected depends on the specific purpose of the toxicology examination.
For example, if a toxicologist is trying to determine the cause of death, they may collect blood, urine, and
tissue samples.
POISONS
A poison is any substance that can cause harm to a living organism when ingested, inhaled,
injected, or absorbed through the skin. Poisons can be natural or synthetic.
Natural poisons are found in plants, animals, and other organisms. Synthetic poisons are man-
made.
COMMONLY USED TYPES OF POISONS (ARSENIC AND CYANIDE)
Arsenic and cyanide are two of the most commonly used types of poisons.
Arsenic is a heavy metal that is found in the environment. It can be ingested through
contaminated food or water, or it can be inhaled as dust or fumes.
Arsenic poisoning can cause a variety of symptoms, including vomiting, diarrhea, abdominal
pain, and seizures.
Cyanide is a chemical compound that is found in some plants and animals. It can also be
produced synthetically.
Cyanide poisoning can cause death within minutes.
TYPE OF POISONS
Poisons can be classified into two main types:
CORROSIVE POISONS:
Corrosive poisons damage the tissues they come into contact with. Examples of corrosive
poisons include acids and alkalis.
True poisons:
True poisons are absorbed into the bloodstream and cause harm to internal organs
WEEK 11 FORENSIC ANALYSIS TECHNIQUE
FINALS (WEEK 1)
SOIL
Soil consists of plants, minerals, animal matter, and tiny particulates of synthetic products such
as cement, paint, glass, asphalt, and so on. Soil contents are not uniform and they differ from
one place to another. Soil can play an important role in criminal investigation.
For example, soil on a suspect's shoe or splattered inside a car fender can provide forensic scientists
with sufficient information about the suspects and crime victims. Specifically, soil recovered from
clothes, shoes, and automobiles can be analyzed in order to determine if a suspect was or was not in a
particular location. Soil sample analysis is executed by carefully comparing the particle size and shape,
color, mineralogical composition, and biological components of a soil sample obtained from a suspect to
those from a known location.
PETROGRAPHY
Petrography refers to the branch of dealing with the systematic classification and identification
of rock forming minerals, rocks, and soils. Meanwhile, petrographic analysis refers to the use of a
polarizing microscope to determine the optical properties of crystalline mineral substances.
Other means of identification are spectrographic analysis, X-ray diffraction, thermal analysis and
micro-chemical techniques.
Soil sample collection depends on the circumstances of the crime, that is, indoor scenes can
differ from outdoor scenes in terms of the type of evidence recovered and the way in which
these samples are collected.
INDOOR SCENES
Samples made by footwear should be photographed to scale prior to recovery. The particle
samples are often collected using a vacuum method. Here, the samples are vacuumed with a
portable vacuum cleaner equipped with a special attachment, which has a metal screen with a
filter paper.
The area is vacuumed and the filter is removed and labeled with the name of the technician who
operated the vacuum as well as the date, location, and time of collection.
Reference samples from the surrounding area (e.g., points of entry and exit and alibi locations) are
normally
OUTDOOR SCENES
Sampling methods are adjusted when the crime scene is outdoors. In case it involves the
recovery of remains, soil samples are taken at regular intervals up to 100 yards from the gravesite or
point of recovery. A grid search may also be set up and samples can be taken from each square of the
grid and then labeled. Most modern tests just require about a tablespoon of soil.
Vehicles involved in accidents could leave lumps of soil from under the wheel wells and fenders.
These should be, collected and wrapped in protective material to minimize bumping during transport. At
the lab, a soil analyst can read these layers and know where this vehicle has been. The analyst may also
be able to match the layers in a lump of soil to a specific vehicle.
SOIL SAMPLES FROM CLOTHING AND FOOTWEAR
These should be collected intact and no attempt should be made to remove soil from clothing,
footwear or tires. If such items can be removed intact, they should be placed in a paper bag or in a
druggist's fold and then placed in a paper bag. The paper bag must be protected so that evidence is
maintained. However, wet samples should be placed in an appropriate container because wet samples
placed in a paper bag could quickly rot and
There are several laboratory tests that can be done to examine a soil sample.
Mineral content
o Determining the ratio of mineral and organic content
Electron microscopic examination
Density gradient tube method
Using heat to test the point at which the sample undergoes an exothermic reaction or an
endothermic reaction.
o exothermic reaction - the sample essentially burns and releases heat
o endothermic reaction - the sample absorbs the heat
TOOLMARKS
When tools such as pliers, screwdrivers, hammers and wire cutters are manufactured, the
manufacturing process leaves certain imperfections embedded on the tools' surfaces. These
patterns are unique or each tool. This means that when criminals use a specific tool at a crime
scene, the toolmarks left behind can be analyzed by forensic scientists.
Toolmarks are impressions or marks produced by a tool or instrument on a receptive surface.
When the tool makes contact with the surface with sufficient impact to create an indentation,
the pattern of the tool is permanently reproduced onto that surface.
In forensic science, toolmarks can make a negative impression (stamping type) or an abrasion
(friction type). Some toolmarks are a combination of both types. Usually, toolmark impressions
are microscopic and are due to the imperfections found on the cutting surface of a tool. These
marks comprise the "signature" or identifying characteristics of a specific tool. Laboratory
examinations and comparisons from a "suspect tool" with toolmarks recovered from a crime
scene can help provide conclusive evidence that, in turn, can link a suspect to a specific crime
and hence
EVIDENCE SUBMITTED IN TOOLMARK CASES MAY INCLUDE TOOLS, SUCH AS THOSE LISTED BELOW.
bolt cutters
scissors
saws
knives and box cutters
screwdrivers and chisels
crowbars tire irons
Casting and molding refers to the method of extracting an impression using a cast-like plaster of
paris inside a mold to recover the pattern for laboratory analysis. When an item like a shoe or a tire
comes into contact with a soft surface, it leaves a pattern indicating an impression. The collection and
analysis of impression evidence found at the scene of a crime can be crucial in an
PROCEDURE OF CASTING
Hair refers to slender, threadlike outgrowths of the epidermis, which forms a distinct type of
body covering in mammals. Only mammals have true hair; in fact, even apparently hairless
mammals, such as the rhinoceros„ elephant and armadillo, have hairs around the snout, at the
tip of the tail, and behind each scale, respectively. When the individual hairs are fine and closely
spaced, the coat of hair is called fur, when they are soft and matted together, they are called
wool. Meanwhile, coarse, stiff hairs are called bristles, and when these are pointed, they are
called quills as in the porcupine and hedgehog.
In the field of forensic science, hair is one of the most common types of trace evidence found at
any, the. crime scene. Next to teeth and bones, hair is decay-resistant. Although it cannot fully
provide conclusive evidence, when used with other details, it has been proven to have an
essential role in criminal investigation. This is because hair transfer may occur during physical
contact between the victim and the suspect. Hair may fall out under conditions that the suspect
is not aware of and unable to guard against it. When properly identified, hair can be used to
identify either the suspect or the victim.
BIOLOGY OF HAIR
It is composed of keratin, which is also the primary component of finger and toe nails.
It is produced from the hair follicle, which is developed in humans during fetal development; no
new follicles are produced after birth.
Hair color is mostly the result of pigments or chemical compounds reflecting certain wavelengths
of visible light.
Hair shape (round or oval) and texture (curly or straight) are heavily influenced by genes. The
physical appearance of hair can also be influenced by nutritional status and intentional alteration
(heat curling, straightening, perms, coloring, etc.).
The body area from which a hair sample originated can be determined through general
morphology. The size, length, shape, stiffness, color, curliness, and microscopic appearance all contribute
to the determination of body area. Pigmentation and medullar appearance also influence body area
identification. Hair strands that exhibit microscopic characteristics shared by different anatomical areas
are called body hairs, which include hairs found on the lower abdomen, upper legs, and back. There is
also a wide range of variations in head and pubic hairs; thus the majority of work in forensics has focuses
on comparing and differentiating hairs from head and pubic regions.
HAIRS HAVE A NUMBER OF INNATE QUALITIES THAT MAKE THEM USEFUL AS TRACE EVIDENCE
to determine whether the hair in question originated from an animal or human being and the
comparison of questioned and known hairs; and
to ascertairi whether two or more individuals could have come into contact or whether one or
more individuals could have come into contact with an object.
The value of fibers as evidence in criminal cases has also been widely recognized due to several reasons
discussed below.
First, fiber evidence is seldom conclusive by itself, but in conjunction with other details or
evidence.
Fiber evidence can help locate a suspect at the scene of the
crime.
Fiber evidence can be interchanged between the victim and the suspect, especially in violent
crimes such as rape, assault, or murder. This interchange can help prove that the suspect and the
victim were in the same location. Such evidence can weaken the credibility of the rapist's alibi
(i.e., when he says that he was never around the victim).
WEEK 3