This test certificate provides the chemical composition, mechanical properties, and test results for NORMA -V 4.00 X 450 MM welding electrodes manufactured by D & H SECHERON ELECTRODES PVT. LTD. on September 9, 2023. The chemical composition and mechanical properties met the requirements for ASME section-II, Part-C Edition 2023. Radiography and fillet weld tests were also satisfactory. The electrodes conform to AWS/SFA:5.1 - E6013 standards.
This test certificate provides the chemical composition, mechanical properties, and test results for NORMA -V 4.00 X 450 MM welding electrodes manufactured by D & H SECHERON ELECTRODES PVT. LTD. on September 9, 2023. The chemical composition and mechanical properties met the requirements for ASME section-II, Part-C Edition 2023. Radiography and fillet weld tests were also satisfactory. The electrodes conform to AWS/SFA:5.1 - E6013 standards.
This test certificate provides the chemical composition, mechanical properties, and test results for NORMA -V 4.00 X 450 MM welding electrodes manufactured by D & H SECHERON ELECTRODES PVT. LTD. on September 9, 2023. The chemical composition and mechanical properties met the requirements for ASME section-II, Part-C Edition 2023. Radiography and fillet weld tests were also satisfactory. The electrodes conform to AWS/SFA:5.1 - E6013 standards.
This test certificate provides the chemical composition, mechanical properties, and test results for NORMA -V 4.00 X 450 MM welding electrodes manufactured by D & H SECHERON ELECTRODES PVT. LTD. on September 9, 2023. The chemical composition and mechanical properties met the requirements for ASME section-II, Part-C Edition 2023. Radiography and fillet weld tests were also satisfactory. The electrodes conform to AWS/SFA:5.1 - E6013 standards.
Serial No :2023/U12/0100 Brand Name & Size(mm):NORMA -V 4.00 X 450 MM Date of issue :25-11-2023 Batch No:U12200100 Date of Mfg:09-09-2023 PO No. & Date : TDC No. & Date :
Chemical Composition of all Weld Metal wt. (%):
C 0.064 Mn 0.423 Si 0.302 S 0.023 P 0.036 Cr 0.023 Ni 0.021 Mo 0.001 V 0.012 Cu 0.010
Mechanical Properties of All Weld Metal:
Test Condition As Welded Y.S. 0.2% offset (MPa) 406.0 U.T.S. (MPa) 442.0 Elongation (%) 26.0 CVN Impact Energy (Joules Test Temp. at °C ) 0 CVN Impact (Joules) 64, 58, 50, 48, 50 Radiography Satisfactory Fillet Weld Test Satisfactory Special Requirements :
Test Conducted as per : AWS/SFA:5.1 - E6013
As per EN 10204 Type : 3.1 We certify that supply made against this TC conforms to all the requirements of ASME section-II, Part-C Edition 2023 in all respects. This clause is applicable for products identified to AWS code only. Issued To: Checked By: Signature valid Digitally signed by S Satheesh Kumar Date: 2023.11.25 15:26:33 +05:30 Reason: Digital Sign Location: DGM - QA & QC Authorised Signatory(QA/QC) Head office: 44-46 Industrial Estate, Kila Maidan, Post Bag No 3, Indore - 452006 (M.P.) INDIA, Tel:+91-731 4229240/41, Fax:+917314229260, Email:qc@dnhsecheron.net, tsd@dnhsecheron.net This is the system generated test certificate signature not required. QC-21/Rev.No.08/Dated:Aug-2021