Professional Documents
Culture Documents
Linkden STRUCTURAL CALCULATION
Linkden STRUCTURAL CALCULATION
By Date14-Jan-24 Chd
24.402m
Y X
Z
Load 12
DIMENSION
Print Time/Date: 23/01/2024 11:30 STAAD.Pro CONNECT Edition 22.00.00.15 Print Run 1 of 1
Job No Sheet No Rev
1
Software licensed to STAAD.Pro Advanced Part
CONNECTED User: Not signed in
Job Title Ref
By Date14-Jan-24 Chd
Y
X
Z
Load 2
Wind Load
Print Time/Date: 23/01/2024 11:28 STAAD.Pro CONNECT Edition 22.00.00.15 Print Run 1 of 1
Job No Sheet No Rev
1
Software licensed to STAAD.Pro Advanced Part
CONNECTED User: Not signed in
Job Title Ref
By Date14-Jan-24 Chd
X = -10.572 kN
X = -10.850 kN Y = -3.493 kN X = -39.432 kN
Y = -13.554 kN Z = 14.749 kN Y = 6.358 kN
Z = 15.912 kN MX = 12.778 kN-m Z = -0.327 kN
MX = 15.208 kN-m MY = -0.000 kN-m MX = -0.446 kN-m
X = -27.469 kN MY = -0.000 kN-m MZ = 26.429 kN-m MY = -0.000 kN-m X = -39.192 kN
Y = -22.398 kN MZ = 26.964 kN-m MZ = 76.595 kN-m Y = 5.208 kN
Z = 15.307 kN Z = 0.015 kN
MX = 13.165 kN-m MX = 0.066 kN-m
Y MY = -0.000 kN-m MY = 0.000 kN-m
X MZ =kN
X = -45.844 70.073 kN-m MZ = 76.142 kN-m kN
X = -39.513
Z
Y = -5.969 kN Y = 8.922 kN
Z = -0.578 kN Z = 0.530 kN
MX = -1.019 kN-m MX = 0.842 kN-m
MY = -0.000 kN-m MY = 0.000 kN-m
MZ = 89.472 kN-m kN
X = -46.990 MZ =kN
X = -25.363 76.743 kN-m
Y = -6.322 kN Y = -1.222 kN
Z = -0.038 kN Z = -14.640 kN
X = -11.386 kN
MX = -0.096 kN-m MX = -11.887 kN-m
Y = -16.574 kN
MY = -0.000 kN-m X = -46.229 kN X = -11.167 kN MY = 0.000Load
kN-m12
Z = -15.656 kN
MZ = 91.992 kN-m Y = -3.037 kN Y = -18.227 kN MZ = 66.440 kN-m
Z = 0.451 kN MX = -14.420 kN-m Z = -15.724 kN
MX = 0.769 kN-m MY = -0.000 kN-m MX = -14.895 kN-m
MY = -0.000 kN-m MZ = 28.036 kN-m MY = 0.000 kN-m
MZ = 90.273 kN-m MZ = 27.539 kN-m
Print Time/Date: 23/01/2024 11:29 STAAD.Pro CONNECT Edition 22.00.00.15 Print Run 1 of 1
Current Date: 1/23/2024 11:26:50 AM
Units System: kN_m
Summary Table
-----------------------------------------------------------------------------------------------------------------------------------------------
Connection NO Group Name Connection Name Ratio Status
1 ———————————— CB - N(51) - M(98) 0.953 OK
2 ———————————— CVR - N(391) - M(812,817,818) 0.037 OK
3 ———————————— CVR - N(519) - M(1027,1032,1031) 0.081 OK
-----------------------------------------------------------------------------------------------------------------------------------------------
Connection NO: 1
Connection Name: CB - N(51) - M(98)
Report Type: Data report
Members
Column
Column type : Prismatic member
Section : HD260x68.2
Material : A36
Longitudinal offset : 0 mm
Transversal offset : 0 mm
Connector
Base plate
Connection type : Unstiffened
Position on the support : Center
N: Longitudinal dimension : 450 mm
B: Transversal dimension : 400 mm
Thickness : 27 mm
Material : A36
Column weld : E70XX
Outer welds flanges only : No
D: Column weld size (1/16 in) : 5
Override A2/A1 ratio : No
Include shear lug : No
Support
With pedestal : No
Longitudinal dimension : 2000 mm
Transversal dimension : 2000 mm
Thickness : 500 mm
Material : C 4-60
Include grouting : No
Anchor
Anchor position : Transversal position
Rows number per side : 1
Anchors per row : 3
Longitudinal edge distance on the plate : 50 mm
Transverse edge distance on the plate : 50 mm
Anchor type : Headed
Head type : Hexagonal
Include lock nut : No
Anchor : M_24
Effective embedment depth : 300 mm
Total length : 358.68 mm
Material : F1554 Gr36
Fy : 0.248 kN/mm2
Fu : 0.4 kN/mm2
Cracked concrete : No
Brittle steel : No
Anchors welded to base plate : No
Anchor reinforcement
Type of reinforcement : Primary
Tension reinforcement : No
Shear reinforcement : No
Connection NO: 1
Connection Name: {0}CB - N(51) - M(98)
Report Type: Design report
Design code: AISC 360-16 LRFD, ACI 318-08
DEMANDS
Description Pu Mu22 Mu33 Vu2 Vu3 Load type
kN kN*m kN*m kN kN
Base plate
Distance from anchor to edge [mm] 38.00 6.35 -
Weld size [1/16in] 5 3.00 - table J2.4
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
Concrete base
Axial bearing [kN/m2] 30474.83 5967.47 LC-12-1 0.20 DG1 3.1.1;
Base plate
Flexural yielding (bearing interface) [kN*m/m] 40.71 33.07 LC-12-1 0.81
DG1 Eq. 3.3.13, DG1 Sec 3.1.2
Flexural yielding (tension interface) [kN*m/m] 40.71 38.80 LC-16-5 0.95
DG1 Eq. 3.3.13
Column
Weld capacity [kN/m] 1828.48 728.66 LC-16-5 0.40 p. 8-9, Sec. J2.5,
Sec. J2.4, DG1 p. 35
Elastic method weld shear capacity [kN/m] 1218.98 92.78 LC-12-1 0.08 p. 8-9, Sec. J2.5,
Sec. J2.4
Elastic method weld axial capacity [kN/m] 1828.48 611.12 LC-16-5 0.33 p. 8-9, Sec. J2.5,
Sec. J2.4
Ratio 0.95
Base plate
Distance from anchor to edge [mm] 38.00 6.35 -
Weld size [1/16in] 5 3.00 - table J2.4
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
Concrete base
Axial bearing [kN/m2] 30474.83 5967.47 LC-12-1 0.20 DG1 3.1.1;
Base plate
Flexural yielding (bearing interface) [kN*m/m] 40.71 33.07 LC-12-1 0.81
DG1 Eq. 3.3.13, DG1 Sec 3.1.2
Flexural yielding (tension interface) [kN*m/m] 40.71 38.80 LC-16-5 0.95
DG1 Eq. 3.3.13
Column
Weld capacity [kN/m] 1828.48 728.66 LC-16-5 0.40 p. 8-9, Sec. J2.5,
Sec. J2.4, DG1 p. 35
Elastic method weld shear capacity [kN/m] 1218.98 14.85 LC-17-6 0.01 p. 8-9, Sec. J2.5,
Sec. J2.4
Elastic method weld axial capacity [kN/m] 1828.48 841.80 LC-17-6 0.46 p. 8-9, Sec. J2.5,
Sec. J2.4
Ratio 0.95
Major axisAnchors
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. Max. Sta. References
Anchors
Anchor spacing [mm] 150.00 96.00 - Sec. D.8.1
Concrete cover [mm] 813.00 76.20 - Sec. 7.7.1
Effective length [mm] 315.60 - 484.40
Verification Unit Capacity Demand Ctrl EQ Ratio References
DESIGN CHECK
Anchor tension [kN] 102.96 73.28 LC-16-5 0.71 Eq. D-3
Breakout of anchor in tension [kN] 241.26 73.28 LC-16-5 0.30 Eq. D-4, Sec.
D.4.1.1
Breakout of group of anchors in tension [kN] 321.27 218.60 LC-16-5 0.68 Eq. D-5, Sec.
D.4.1.1
Pullout of anchor in tension [kN] 144.95 73.28 LC-16-5 0.51 Sec. D.4.1.1
Anchor shear [kN] 53.54 6.57 LC-12-1 0.12 Eq. D-20
Breakout of anchor in shear [kN] 249.20 6.57 LC-12-1 0.03 Sec. D.4.1.1
Breakout of group of anchors in shear [kN] 270.36 39.43 LC-12-1 0.15 Sec. D.4.1.1
Pryout of anchor in shear [kN] 482.53 6.57 LC-12-1 0.01 Eq. D-4, Sec.
D.4.1.1
Pryout of group of anchors in shear [kN] 642.63 19.72 LC-12-1 0.03 Eq. D-5, Sec.
D.4.1.1
Interaction of tensile and shear forces [kN] 1.20 0.00 LC-11-0 0.00 Eq. D-3, Eq. D-4,
Sec. D.4.1.1, Eq. D-5, Eq. D-20, Sec. D.7
Ratio 0.71
Minor axisAnchors
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. Max. Sta. References
Anchors
Anchor spacing [mm] 150.00 96.00 - Sec. D.8.1
Concrete cover [mm] 813.00 76.20 - Sec. 7.7.1
Effective length [mm] 315.60 - 484.40
Verification Unit Capacity Demand Ctrl EQ Ratio References
DESIGN CHECK
Anchor tension [kN] 102.96 73.28 LC-16-5 0.71 Eq. D-3
Breakout of anchor in tension [kN] 241.26 73.28 LC-16-5 0.30 Eq. D-4, Sec.
D.4.1.1
Breakout of group of anchors in tension [kN] 321.27 218.60 LC-16-5 0.68 Eq. D-5, Sec.
D.4.1.1
Pullout of anchor in tension [kN] 144.95 73.28 LC-16-5 0.51 Sec. D.4.1.1
Anchor shear [kN] 53.54 6.57 LC-12-1 0.12 Eq. D-20
Breakout of anchor in shear [kN] 246.20 2.47 LC-17-6 0.01 Sec. D.4.1.1
Breakout of group of anchors in shear [kN] 270.36 14.85 LC-17-6 0.05 Sec. D.4.1.1
Pryout of anchor in shear [kN] 482.53 2.47 LC-17-6 0.01 Eq. D-4, Sec.
D.4.1.1
Pryout of group of anchors in shear [kN] 754.34 12.37 LC-17-6 0.02 Eq. D-5, Sec.
D.4.1.1
Interaction of tensile and shear forces [kN] 1.20 0.00 LC-11-0 0.00 Eq. D-3, Eq. D-4,
Sec. D.4.1.1, Eq. D-5, Eq. D-20, Sec. D.7
Ratio 0.71
Anchors tensions
Anchor Transverse Longitudinal Shear Tension
mm mm kN kN
1 -150.00 -175.00 6.57 0.00
2 0.00 -175.00 6.57 0.00
3 150.00 -175.00 6.57 0.00
4 150.00 175.00 6.57 70.68
5 0.00 175.00 6.57 71.05
6 -150.00 175.00 6.57 71.42
Anchors tensions
Anchor Transverse Longitudinal Shear Tension
mm mm kN kN
1 1080000.00 218.60 4, 5, 6
1 1000000.00 39.43 1, 2, 3, 4, 5, 6
2 1000000.00 19.72 4, 5, 6
1 1080000.00 218.60 4, 5, 6
1 1000000.00 4.95 1, 6
2 1000000.00 9.90 1, 2, 5, 6
3 1000000.00 14.85 1, 2, 3, 4, 5, 6
Connection NO: 2
Connection Name: CVR - N(391) - M(812,817,818)
Report Type: Data report
Members
Actual members
Upper gusset : No
Lower gusset : Yes
Beam
General
Section : IPE180
Material : A36
Interfaces
Lower gusset
General
tp: Thickness : 19.05 mm
Material : A36
LV: Length over vertical limit : 244.62 mm
LH: Length on beam : 242.93 mm
Bottom gusset-to-beam connection
Connection type to beam : Directly welded
Directly welded
Welding electrode to beam : E70XX
D: Weld size to beam (1/16 in) : 2
Connection NO: 2
Connection Name: {0}CVR - N(391) - M(812,817,818)
Report Type: Design report
Design code: AISC 360-05 LRFD
DEMANDS
Description Pu Vu Mu33 Brace1 Brace2 Brace3 Brac
kN kN kN*m kN kN kN kN
Tab side
Bolts shear [kN] 141.56 4.90 LC-12-1 0.03 Tables (7-1..14)
Bolt bearing under shear load [kN] 158.77 4.90 LC-12-1 0.03 Eq. J3-6
Bolt bearing on gusset [kN] 380.95 4.90 LC-12-1 0.01 Eq. J3-6
Tee stem tensile yielding [kN] 235.96 4.90 LC-12-1 0.02 Eq. J4-1
Tee stem tensile rupture [kN] 165.56 4.90 LC-12-1 0.03 Eq. J4-2
Brace
HSS wall shear yielding [kN] 190.63 4.90 LC-12-1 0.03 Eq. J4-3
HSS wall shear rupture [kN] 230.34 4.90 LC-12-1 0.02 Eq. J4-4
Ratio 0.03
Ratio 0.01
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
Tab side
Bolts shear [kN] 141.56 3.99 LC-12-1 0.03 Tables (7-1..14)
Bolt bearing under shear load [kN] 158.77 3.99 LC-12-1 0.03 Eq. J3-6
Bolt bearing on gusset [kN] 380.95 3.99 LC-12-1 0.01 Eq. J3-6
Weld capacity [kN] 224.28 3.99 LC-12-1 0.02 Eq. J2-4
Tee stem tensile yielding [kN] 235.96 3.99 LC-12-1 0.02 Eq. J4-1
Tee stem tensile rupture [kN] 165.56 3.99 LC-12-1 0.02 Eq. J4-2
Brace
HSS wall shear yielding [kN] 114.38 3.99 LC-12-1 0.03 Eq. J4-3
HSS wall shear rupture [kN] 138.20 3.99 LC-12-1 0.03 Eq. J4-4
Ratio 0.03
Ratio 0.04
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
Gusset
Beam yielding (normal stress) [kN] 2067.61 4.15 LC-12-1 0.00 Eq. B-1, Appendix
B, DG29, Eq. J4-1
Shear yielding [kN] 1378.41 4.55 LC-12-1 0.00 Eq. J4-3
Gusset edge tension stress [kN/m2] 223390.14 91.95 LC-13-2 0.00
J4-1
Gusset edge shear stress [kN/m2] 148926.76 491.85 LC-12-1 0.00
J4-1
Weld capacity [kN] 456.39 5.77 LC-12-1 0.01 Tables 8-4 .. 8-11
Beam
Web crippling [kN] 782.84 4.15 LC-12-1 0.01 Eq. J10-4, Eq. B-1,
Appendix B, DG29
Local web yielding [kN] 718.09 4.15 LC-12-1 0.01 Eq. J10-2, Eq. B-1,
Appendix B, DG29
Ratio 0.01
REFERENCES
[9] AISC 2005, Design Examples Version 13.0, pp. IIC-26 - IIC-27
Connection NO: 3
Connection Name: CVR - N(519) - M(1027,1032,1031)
Report Type: Data report
Members
Actual members
Upper gusset : Yes
Lower gusset : No
Beam
General
Section : IPE180
Material : A36
Interfaces
Upper gusset
General
tp: Thickness : 19.05 mm
Material : A36
LV: Length over vertical limit : 241.73 mm
LH: Length on beam : 279.57 mm
Top gusset-to-beam connection
Connection type to beam : Directly welded
Directly welded
Welding electrode to beam : E70XX
D: Weld size to beam (1/16 in) : 2
Connection NO: 3
Connection Name: {0}CVR - N(519) - M(1027,1032,1031)
Report Type: Design report
Design code: AISC 360-05 LRFD
DEMANDS
Description Pu Vu Mu33 Brace1 Brace2 Brace3 Brac
kN kN kN*m kN kN kN kN
Tab side
Bolts shear [kN] 141.56 8.82 LC-12-1 0.06 Tables (7-1..14)
Bolt bearing under shear load [kN] 158.77 8.82 LC-12-1 0.06 Eq. J3-6
Bolt bearing on gusset [kN] 380.95 8.82 LC-12-1 0.02 Eq. J3-6
Weld capacity [kN] 224.28 8.82 LC-12-1 0.04 Eq. J2-4
Tee stem tensile yielding [kN] 235.96 8.82 LC-12-1 0.04 Eq. J4-1
Tee stem tensile rupture [kN] 165.56 8.82 LC-12-1 0.05 Eq. J4-2
Brace
HSS wall shear yielding [kN] 114.38 8.82 LC-12-1 0.08 Eq. J4-3
HSS wall shear rupture [kN] 138.20 8.82 LC-12-1 0.06 Eq. J4-4
Ratio 0.08
Ratio 0.08
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
Tab side
Bolts shear [kN] 141.56 4.46 LC-16-5 0.03
H/D=6/24=0.25
effective Area For Roof=48m2
Roof
(Suction)
Zone-1 -0.7
Zone-2 -0.4
Roof
(Pressure)
For All Zone +0.2