table 3 - Fits for cast iron and stee! housings (for radial bearings)
Fits forcast iron and st
1ousings (for radial bearings)")
Conditions: Examples Toler Displacement of outer ring
‘Stationary outer ring load
(soll or non-spt housings)
General engineering, railway
axleboxes
Loads of allkinds Hr Can be displaced
Light normal
bbacs (P $0.1 C) with
imple working conditions General engineering He Can be displaces
Drying eylinders, large
‘electrical machines
‘Thermal expansion wit spherical
ofthe shaft roler bearings or) Can be displaced
Rotating outer ring load
(ror-spit housings only)
Heavy loads on beatings in thn-alles Roller bearing wneolhubs,
housings, heavy shock loads (P >0,1 C) big-end bearings Pr Cannot be displaced
Bal bearing wheel hubs,
big-ond bearings,
Normalto heavy loads (P > 0,05 C) crane traveling wheels Nr Cannot be esplaced
Conveyor rollers, rope sheaves,
Light and variable ads (P's 0.05 C) bolt tensioner pulleys Mr Cannot be displaced
Direction of load indeterminate
Heavy shock loads
(nar-splt housings only) Electric traction motors wr Cannot be displaced
Normalto heavy loads (P > 0,05 C), axial
250 mm) or temperature differences between the outer ring and housing > 10 °C (18 °F),
tolerance class G7@ should be used instead of tolerance class H7®.
5) For large bearinas (D > 500 mm) or temperature differences between the outer ring and housing > 10°C (18 °F),
tolerance class F7® should be used instead of tolerance class G78.