Professional Documents
Culture Documents
Reinforced Concrete Design: Using The Ultimate Limit Design Method
Reinforced Concrete Design: Using The Ultimate Limit Design Method
by
Eng. Mahmoud Mohamed Atia Zoair
* Calculation of coefficients
* Design of slabs
* Design of flat slabs
* Design of beams
* Design of sections under M,N
* Check shear in beams
* Design for torsion
* Design of rectangular columns
* Design of circular columns
* Design of isolated footings
* Design of isolated footings under moment
* Design of combined footings
* Design of strap footings
* Design of retaining walls
* Deflection of cantilevers
* Deflection of simples
Concrete design according to the Egyptian code 1995.
* Calculation of Coeffecients
* Project :
Hollow Slabs:
Web breadth Spacing Thick Slab th F.C L.L One way Two way
Area
b (cm) e (cm) t (cm) ts (cm) (kg/m )2
(kg/m )2
Wu (t/m`) Wu (t/m2)
1 12 40 32 7 150 200 1.237 1.385
2 12 40 27 7 150 200 1.129 1.250
3 12 40 30 5 150 200 1.169 1.318
4 12 40 32 7 150 200 1.237 1.385
5 12 40 32 7 150 200 1.237 1.385
Slabs:
Beams:
* Design of Slabs
* Project :
* Project :
* Design of Beams
* Project :
* Project :
* Project :
Calculation of stirrups:
* Project :
* Project :
1.6 70 61.54 25 f 18
* Project :
###
Calculation of Rft. : As /m Asmin ###
11.90 8.25 cm2
###
Long Rft. : no. f total no.
6 16 /m 17 ###
* Project :
###
Calculation of Rft. : As /m Asmin ###
4.18 8.25 cm2 ###
###
Long Rft. : no. f total no.
8 12 /m 17 ###
* Project :
* Project :
Longitudinal direction:
Stirrups : no. f
5 10 4 branches
Transverse direction:
internal footing 5 16 /m 10
* Project :
3.50
3.30
Coeff. of earth pressure Ka = 0.3 ###
###
0.40
###
0.60 R.C
###
P.C ###
0.30
2.50 ###
2.90 ###
###
###
Factor of safety against sliding = 1.74
Max. stress on soil = 0.62 kg/cm2 Safe stress No tension on soil ###
Min. stress on soil = 0.42 kg/cm2 Safe stress No tension on soil ###
Calculation of Rft. :
###
Mu (m.t) C1 J As (cm2) As min ###
For wall 5.34 4.52 0.819 8.23 3.30 8 f 12
For Base 11.73 7.62 0.826 7.17 8.25 5 f 16
* Deflection of Cantilevers
* Project :
PDL+ PLL
WDL+ WLL
Span
###
Breadth Depth Thickness Span
Sec. Properties of sec: b (cm) d (cm) t (cm) L (m) ###
1 25 65 70 2.4
###
###
Top Rft.: no. f area ###
5 18 12.72 cm 2
###
Bottom Rft.: no. f area
5 18 12.72 cm2 ###
Working loads: PDL (t) PLL (t) WDL (t/m) WLL (t/m) ###
2.50 1.50 ###
Notes: Safe
* Deflection of Simples
* Project :
PDL+ PLL
WDL+ WLL
Span/2 Span/2
###
Breadth Depth Thickness Span
Sec. Properties of sec: b (cm) d (cm) t (cm) L (m) ###
1 25 65 70 6
###
###
Top Rft.: no. f area ###
4 12 4.52 cm2
###
Bottom Rft.: no. f area
5 16 10.05 cm2 ###
Working loads: PDL (t) PLL (t) WDL (t/m) WLL (t/m) ###
1.50 1.00 2.00 1.50 ###
Notes: Safe