Professional Documents
Culture Documents
SoW For Detailing
SoW For Detailing
#825156
418 Ramsell Street, San Francisco, CA 94132 CA DIR Registration #1000010599
Tel: 415-587-8729 Fax: 415-587-8732 Signatory to Local Union #377 & #378
B BID REFERENCE
1 Addendum: NONE
2 Arch. / Structural Drawings: ASI 15 Dated 04/01/2021
3 Related Specification NONE
D PROJECT SPECIFIC EXCLUSIONS (Design/Engineering, Submittals, Material, Fabrication & Installation, applied to all Add
Alternates/Provision Items, U.O.N.)
1 Engineering for rails, attachment and backing, etc.
2 Flashing boot on rails.
3 Removal and disposal of existing safety rails, if any.
4 Any finish on rails, if any.
5 Local hiring, any LBE/SLBE/WBEMBE goal.
E STANDARD EXCLUSIONS (Design/Engineering, Submittals, Material, Fabrication & Installation, applied to all Add
Alternates/Provision Items, U.O.N.)
1 Demolition, Removal, Modification, Rectification, Protection, and / or Reinstallation of Existing Items;
2 Shoring, Waling, Structural Supporting Platform / Trestle, Patch up, Concrete & Reinforcement, and Grouting;
3 Digging and Concrete Work for Fence / Gate posts; General Scaffolding / Protection / Lighting / Access at Site;
4 Non-PC Stair Tread Safety Nosing (U.O.N.); Warning tapes; Wood Top Rail for Guardrail; Glazed Guardrail;
5 All Wood / Metal Studs / Gage Metal-to-Steel fasteners, Nuts & Washers for Threaded Studs, Simpson and similar hardware, Headed/Threaded Studs on
Beam Top, and Anchor bolts for others; Protection for Others’ Works;
6 Temporary Perimeter Safety Cables at all locations; Flag Pole & Sign Post; Abrasive Coating;
7 All gage metals/sheet metals (under 3/16” thick), Light gage stud framing, Metal Deck and Accessories (Hoisting, Beam-Top studs, Deck supports,
Closures, Flashing, Trimming, etc.), Siding, Standing seam metal roofing, Unistrut systems, Suspended T-bar ceiling and supports, Stainless Steel,
Aluminum, Alloys, Copper, Brass, Bronze, Cast Iron, Cast Steel, Wrought Iron, FRP, Re-bar, wood, Glazing, and other non-ferrous items (U.O.N.);
8 All Frames, Fabric, and attachments at Chain-link Fences & C.L. Gates, and Chain-link Guardrails; Bike Rack;
9 Inspection Fee, Testing & Laboratory fee, Licensed Surveyor, 3rd party charges / expenses, Design & Engineering (U.O.N.);
10 Installation of embed/cast-in items (Anchor bolts, columns/posts, wall embed plate, etc.), Rebar welding, Rebar Scanning (X-ray and/or any other
methods), Core Drilling (U.O.N.); Warning Tape & Concrete Infill for Bollard;
11 Finish paint; Primer on galvanized items; Powder coating; Epoxy primer; Blast-cleaning; Fireproofing;
12 Paint/primer removals at steel members for metal deck and shear stud welding; Proprietary Counter Support;
13 Site Layout, Loading / Offloading, Storage, Custody, Traffic Control and Installation for all FOB items;
14 Loading / Offloading, Fasteners and Safety provisions for all other trades;
15 Hazardous material abatement, including all testing, monitoring, removals and disposal of hazardous materials;
16 Doors, Windows, Louvers, Lintel and Frames for the same; Ventilation or Evacuation of welding fumes;
17 Sumps, Drains, Grates, Downspouts / RWL / Scupper, and Supports for the same (U.O.N.);
18 All electrical components and hardware (i.e. Locks, Intercoms, Panic bar, operators, etc., except hinges and rollers) for metal gate , cutting/drilling holes at
metal gate for installation of electrical components and hardware if they are not shown on design plan;
19 Doors, Windows, Louvers, Lintel and Frames for the same; Ventilation or Evacuation of welding fumes;
20 Sumps, Drains, Grates, Downspouts / RWL / Scupper, and Supports for the same (U.O.N.);
21 Sleeves, Pipes, Holes and Reinforcements at steel members for Electrical and Mechanical penetrations;
22 Reference to Demolition, Civil, Mechanical, Plumbing, Electrical, Fire Protection, Telecom/IT and Security, etc. Drawings;
23 Bonds and Permits; All site insurances & sub-contractor’s general liabilities for condominium / OCIP project;
24 All others items or work are not stated in Scope of Coverage above. Special Allowances as per GC bidding document, if any.
F PRICING
1 Base Bid:Eight Hundred Eighty Thousand Dollars ($89,300.00)
2 BID ALTERNATE
Furnish and install Galvanized steel rails in stead of aluminum rails ----- $45,000.00
G PAYMENT SCHEDULE
10% Upon shop drawing submittal, 90% Progress Payment; 5% max. retention.
H ACCEPTANCE
For questions regarding this proposal, please call KJ Tong at 415-272-1388 or email kjtprojects@yahoo.com