Professional Documents
Culture Documents
Brochure ESD Accessories 02
Brochure ESD Accessories 02
E K A T O E S D A c c e s s o r i e s
Product Information
Technical Data
• ESD-Collector tray
• ESD-Cooling jacket
• ESD-Flushing attachment
ESD Accessories
Collector tray
Additional measurement
• Temperature indicator
• Flow indicator
• Pressure indicator
Cooling jacket Short heat trap Flushing attachment
• With high operating temperatures, • At higher operating temperatures • In order to prevent the seal rings
pressure or sliding velocities, the between 250° C and 400° C a short coming into contact with gases,
frictional heat generated can no heat trap (orange), can also be vapors or liquids that would impair
longer be dissipated solely by means provided. their correct functioning, they are
of seal liquid storage vessels flushed with inert media.
• It is installed between the mounting
operating with natural circulation.
flange and the seal flange. • The inert media are admitted via
• In order to avoid using circulation the flange, a lip seal (orange) restric-
• Its purpose is to isolate the mechanical
pumps, which are expensive and ting their escape into the product
seal thermally from the vessel and
could prove to be unreliable, the space.
mounting flanges and thus permit
seals are provided with a cooling
higher vessel temperatures. • Material: PTFE, special materials
jacket (orange).
Schönauer Strasse 66
79669 Zell i.W.
Germany
Phone
+49 7625 9282-0
Fax
+49 7625 9282-11
E-mail
Info@esd-gmbh.de
Internet
www.ekato.com