Professional Documents
Culture Documents
Structure Analysis-2Floors
Structure Analysis-2Floors
Structure Analysis-2Floors
(2 floors model)
CALCULATION DOCUMENT
1 Structure Analysis
Analysis Regulations
1
19
23
20
25
2
64
81 69
82 70 73
66 71 74 77
72 75 78 63
76 79 83
80 84
68
51 61
22
53 49
55 47 39
57 40 45 27
59 43 28
65 31
24 29 32 35
30 33 36 62
50 52 21
34 37 48 54
46 56 41
38 44 58 42
67 60
26
9 19
11 7
13 5
15 3
17 1
23
10 20
12 8
14 6
16 4
18 2
25
节点编号图
Node numbering graph
111 120
112 124 82 119
113 132 83 123 85 118
125 84 131 86 122 88 117
126 87 130 89 121 114
127 90 129 115
128 116 77
79
78
17
16
47 46
18 49 48
51 50
53 52
55 54 5 13
6 4
7 3
8 2
9 1 36
25 38 37
40 39
42 41
44 43
45
3
3 Loads and combinations
Structural importance factor: 1.00
1) condition: 0
Surface load sequence No.1 distribution map (the solid line indicates the unit to which the load is distributed)
2) condition: 1
*Input surface load::
4
Surface load value
Body shape
No Load type Load guiding method (Basic wind pressure)
factor
kN/m2
1 Live load Two-way member -- 0.01
2 Live load Two-way member -- 0.50
Surface load sequence No.1 distribution map (the solid line indicates the unit to which the load is distributed)
Surface load sequence No.2 distribution map (the solid line indicates the unit to which the load is distributed)
3) Condition: 2
5
Surface load value
Body shape
No Load type Load guiding method (Basic wind pressure)
factor
kN/m2
1 wind load Two-way member 1.3 0.35
Surface load sequence No.1 distribution map (the solid line indicates the unit to which the load is distributed)
6
4 Internal force displacement calculation result
Design value of maximum bearing reaction force under each effect combination
(unit:kN、kN.m)
Node control code No. Nx Ny Nz Mx My Mz
NxMax 1 1 0.8 0.1 13.0 0.8 -3.2 -0.0
NyMax 1 1 0.8 0.1 13.0 0.8 -3.2 -0.0
NzMax 3 1 0.7 -0.1 14.1 0.6 -3.2 -0.3
MxMax 1 1 0.8 0.1 13.0 0.8 -3.2 -0.0
MyMax 5 1 0.2 -0.4 7.6 -0.2 -0.5 -0.5
MzMax 1 1 0.8 0.1 13.0 0.8 -3.2 -0.0
Join forces
19 3 1 0.7 -0.1 14.1 0.6 -3.2 -0.3
Max
NxMin 5 1 0.2 -0.4 7.6 -0.2 -0.5 -0.5
NyMin 5 1 0.2 -0.4 7.6 -0.2 -0.5 -0.5
NzMin 5 1 0.2 -0.4 7.6 -0.2 -0.5 -0.5
MxMin 5 1 0.2 -0.4 7.6 -0.2 -0.5 -0.5
MyMin 3 1 0.7 -0.1 14.1 0.6 -3.2 -0.3
MzMin 4 1 0.5 -0.3 13.0 0.3 -2.4 -0.5
NxMax 4 1 0.4 -1.1 8.8 -1.2 -2.5 -0.6
NyMax 7 1 0.3 -0.0 11.4 -0.8 -2.6 -0.0
NzMax 1 1 0.4 -0.0 12.4 -1.0 -3.4 -0.0
MxMax 8 1 0.3 -0.6 6.2 -0.5 -0.7 -0.3
MyMax 5 1 0.3 -1.0 3.6 -0.6 -0.5 -0.6
MzMax 7 1 0.3 -0.0 11.4 -0.8 -2.6 -0.0
Join forces
20 1 1 0.4 -0.0 12.4 -1.0 -3.4 -0.0
Max
NxMin 8 1 0.3 -0.6 6.2 -0.5 -0.7 -0.3
NyMin 4 1 0.4 -1.1 8.8 -1.2 -2.5 -0.6
NzMin 5 1 0.3 -1.0 3.6 -0.6 -0.5 -0.6
MxMin 3 1 0.4 -0.7 11.3 -1.3 -3.3 -0.4
MyMin 1 1 0.4 -0.0 12.4 -1.0 -3.4 -0.0
MzMin 4 1 0.4 -1.1 8.8 -1.2 -2.5 -0.6
7
Node control code No. Nx Ny Nz Mx My Mz
NxMax 5 1 -0.1 -0.2 7.3 -0.6 0.3 0.5
NyMax 1 1 -0.6 0.1 12.3 0.8 3.0 -0.0
NzMax 3 1 -0.5 -0.0 13.4 0.4 3.0 0.3
MxMax 1 1 -0.6 0.1 12.3 0.8 3.0 -0.0
MyMax 1 1 -0.6 0.1 12.3 0.8 3.0 -0.0
MzMax 5 1 -0.1 -0.2 7.3 -0.6 0.3 0.5
Join forces
23 3 1 -0.5 -0.0 13.4 0.4 3.0 0.3
Max
NxMin 1 1 -0.6 0.1 12.3 0.8 3.0 -0.0
NyMin 5 1 -0.1 -0.2 7.3 -0.6 0.3 0.5
NzMin 5 1 -0.1 -0.2 7.3 -0.6 0.3 0.5
MxMin 5 1 -0.1 -0.2 7.3 -0.6 0.3 0.5
MyMin 5 1 -0.1 -0.2 7.3 -0.6 0.3 0.5
MzMin 1 1 -0.6 0.1 12.3 0.8 3.0 -0.0
NxMax 5 1 -0.3 -1.3 3.8 -0.2 0.4 0.5
NyMax 7 1 -0.5 -0.2 12.0 -0.5 2.3 -0.0
NzMax 1 1 -0.6 -0.2 13.0 -0.7 3.0 -0.0
MxMax 8 1 -0.4 -0.8 6.6 -0.2 0.5 0.3
MyMax 3 1 -0.6 -0.9 11.8 -0.8 3.1 0.3
MzMax 4 1 -0.6 -1.3 9.2 -0.7 2.3 0.5
Join forces
25 1 1 -0.6 -0.2 13.0 -0.7 3.0 -0.0
Max
NxMin 3 1 -0.6 -0.9 11.8 -0.8 3.1 0.3
NyMin 4 1 -0.6 -1.3 9.2 -0.7 2.3 0.5
NzMin 5 1 -0.3 -1.3 3.8 -0.2 0.4 0.5
MxMin 3 1 -0.6 -0.9 11.8 -0.8 3.1 0.3
MyMin 5 1 -0.3 -1.3 3.8 -0.2 0.4 0.5
MzMin 7 1 -0.5 -0.2 12.0 -0.5 2.3 -0.0
各效应组合下最大支座反力标准值(单位:kN、kN.m)
组合
节点号 控制 组合号 Nx Ny Nz Mx My Mz
序号
NxMax 1 1 0.6 0.1 10.1 0.6 -2.3 -0.0
NyMax 1 1 0.6 0.1 10.1 0.6 -2.3 -0.0
NzMax 3 1 0.5 -0.1 10.9 0.4 -2.3 -0.2
MxMax 1 1 0.6 0.1 10.1 0.6 -2.3 -0.0
MyMax 8 1 0.3 -0.1 6.5 -0.1 -0.4 -0.2
8
组合
节点号 控制 组合号 Nx Ny Nz Mx My Mz
序号
MzMax 7 1 0.5 0.1 8.8 0.4 -1.8 -0.0
Join forces
19 3 1 0.5 -0.1 10.9 0.4 -2.3 -0.2
Max
NxMin 2 1 0.2 -0.3 7.1 -0.1 -0.4 -0.4
NyMin 2 1 0.2 -0.3 7.1 -0.1 -0.4 -0.4
NzMin 8 1 0.3 -0.1 6.5 -0.1 -0.4 -0.2
MxMin 2 1 0.2 -0.3 7.1 -0.1 -0.4 -0.4
MyMin 3 1 0.5 -0.1 10.9 0.4 -2.3 -0.2
MzMin 4 1 0.4 -0.2 10.1 0.2 -1.8 -0.4
NxMax 4 1 0.3 -0.8 7.0 -0.9 -1.9 -0.4
NyMax 7 1 0.2 -0.0 8.3 -0.6 -1.9 -0.0
NzMax 1 1 0.3 -0.0 9.6 -0.7 -2.5 -0.0
MxMax 8 1 0.2 -0.5 4.6 -0.4 -0.5 -0.2
MyMax 2 1 0.2 -0.8 4.1 -0.5 -0.5 -0.4
MzMax 7 1 0.2 -0.0 8.3 -0.6 -1.9 -0.0
Join forces
20 1 1 0.3 -0.0 9.6 -0.7 -2.5 -0.0
Max
NxMin 8 1 0.2 -0.5 4.6 -0.4 -0.5 -0.2
NyMin 4 1 0.3 -0.8 7.0 -0.9 -1.9 -0.4
NzMin 2 1 0.2 -0.8 4.1 -0.5 -0.5 -0.4
MxMin 3 1 0.3 -0.5 8.8 -0.9 -2.5 -0.3
MyMin 1 1 0.3 -0.0 9.6 -0.7 -2.5 -0.0
MzMin 4 1 0.3 -0.8 7.0 -0.9 -1.9 -0.4
NxMax 2 1 -0.2 -0.1 6.7 -0.4 0.3 0.3
NyMax 1 1 -0.4 0.1 9.5 0.6 2.2 -0.0
NzMax 3 1 -0.4 -0.0 10.4 0.3 2.2 0.2
MxMax 1 1 -0.4 0.1 9.5 0.6 2.2 -0.0
MyMax 1 1 -0.4 0.1 9.5 0.6 2.2 -0.0
MzMax 2 1 -0.2 -0.1 6.7 -0.4 0.3 0.3
Join forces
23 3 1 -0.4 -0.0 10.4 0.3 2.2 0.2
Max
NxMin 1 1 -0.4 0.1 9.5 0.6 2.2 -0.0
NyMin 2 1 -0.2 -0.1 6.7 -0.4 0.3 0.3
NzMin 8 1 -0.2 -0.1 6.2 -0.2 0.3 0.2
MxMin 2 1 -0.2 -0.1 6.7 -0.4 0.3 0.3
MyMin 2 1 -0.2 -0.1 6.7 -0.4 0.3 0.3
MzMin 1 1 -0.4 0.1 9.5 0.6 2.2 -0.0
9
组合
节点号 控制 组合号 Nx Ny Nz Mx My Mz
序号
NxMax 8 1 -0.3 -0.6 4.9 -0.1 0.4 0.2
NyMax 7 1 -0.4 -0.1 8.8 -0.3 1.7 -0.0
NzMax 1 1 -0.4 -0.2 10.1 -0.5 2.2 -0.0
MxMax 8 1 -0.3 -0.6 4.9 -0.1 0.4 0.2
MyMax 3 1 -0.5 -0.7 9.2 -0.6 2.2 0.2
MzMax 4 1 -0.4 -1.0 7.4 -0.5 1.7 0.4
Join forces
25 1 1 -0.4 -0.2 10.1 -0.5 2.2 -0.0
Max
NxMin 3 1 -0.5 -0.7 9.2 -0.6 2.2 0.2
NyMin 4 1 -0.4 -1.0 7.4 -0.5 1.7 0.4
NzMin 2 1 -0.3 -0.9 4.3 -0.2 0.4 0.4
MxMin 3 1 -0.5 -0.7 9.2 -0.6 2.2 0.2
MyMin 8 1 -0.3 -0.6 4.9 -0.1 0.4 0.2
MzMin 7 1 -0.4 -0.1 8.8 -0.3 1.7 -0.0
10
Bending Bending
Torque
No. Code Co Co.No. position Force N Force Q2 Force Q3 moment moment
M
M2 M3
1 60 3 1 0.000 13.2 0.2 0.3 -0.0 -0.1 -1.7
2 61 1 1 0.000 13.1 -1.2 0.1 0.1 -0.0 -1.7
3 59 1 1 0.000 13.1 1.5 -0.0 -0.0 0.1 0.8
4 56 3 1 0.000 11.0 1.7 0.2 0.1 -0.3 1.5
5 58 3 1 0.000 11.0 -1.1 -0.2 -0.2 0.2 -1.7
6 57 1 1 0.000 10.7 0.3 0.0 -0.0 -0.0 -1.6
7 65 4 1 0.000 6.1 1.2 0.4 -0.3 -0.1 0.1
8 64 4 1 0.000 5.9 0.7 0.0 -0.2 -0.0 0.6
9 63 4 1 0.000 5.8 0.3 0.3 -0.0 -0.2 0.9
10 62 4 1 0.000 5.7 -0.2 -0.1 0.1 0.0 0.8
The internal force of the first 10 units with the smallest axial force N (Unit:m,kN,kN.m)
Bending Bending
positio
No. Code Co Co.No. Force N Force Q2 Force Q3 Torque M moment moment
n
M2 M3
1 91 1 1 0.000 -13.2 3.3 -0.1 -0.6 0.0 2.5
2 92 1 1 0.000 -13.2 2.6 -0.0 -0.3 0.0 0.6
11
Bending Bending
positio
No. Code Co Co.No. Force N Force Q2 Force Q3 Torque M moment moment
n
M2 M3
3 93 1 1 0.000 -13.2 1.8 0.0 -0.3 -0.0 -0.9
4 94 1 1 0.000 -13.2 1.1 0.0 -0.1 -0.0 -2.0
5 95 1 1 0.000 -13.2 0.4 0.0 -0.1 -0.0 -2.6
6 96 1 1 0.000 -13.2 -0.3 0.0 0.1 -0.0 -2.8
7 97 1 1 0.000 -13.2 -1.1 0.0 0.1 -0.0 -2.6
8 98 1 1 0.000 -13.1 -1.8 0.0 0.3 -0.0 -1.9
9 99 1 1 0.000 -13.1 -2.6 0.0 0.4 -0.0 -0.8
10 100 1 1 0.000 -13.1 -3.3 0.1 0.7 -0.0 0.8
The internal force of the first 10 elements with the largest bending moment M2
(unit:m,kN,kN.m)
Bending Bending
positio
No. Code Co Co.No. Force N Force Q2 Force Q3 Torque M moment moment
n
M2 M3
1 79 6 1 3.000 -2.9 0.6 1.1 -0.1 1.6 -0.9
2 80 7 1 3.000 -2.7 -0.3 1.0 -0.0 1.5 0.5
3 135 8 1 0.000 -2.9 -2.4 -6.9 0.2 1.2 -0.1
12
Bending Bending
positio
No. Code Co Co.No. Force N Force Q2 Force Q3 Torque M moment moment
n
M2 M3
4 136 1 1 0.100 -6.5 -2.7 14.2 -0.1 1.2 0.2
5 134 8 1 0.000 -4.7 4.1 -6.4 0.1 1.1 0.5
6 78 6 1 3.000 -2.1 -0.2 0.7 -0.0 1.1 0.5
7 17 3 1 3.000 -9.5 0.3 0.6 -0.0 1.1 -0.5
8 18 1 1 3.000 -9.0 -0.2 0.6 -0.0 1.0 0.4
9 133 3 1 0.100 -6.9 3.5 12.0 -0.1 1.0 -0.1
10 77 4 1 3.000 -3.0 1.2 0.6 -0.1 0.9 -1.8
Internal force of the first 10 elements with the smallest bending moment M2
(unit:m,kN,kN.m)
Bending Bending
positio
No. Code Co Co.No. Force N Force Q2 Force Q3 Torque M moment moment
n
M2 M3
1 79 3 1 0.000 -2.9 0.6 1.1 -0.0 -1.7 1.0
2 80 1 1 0.000 -2.7 -0.3 1.0 -0.0 -1.6 -0.5
3 136 8 1 0.000 -3.1 -0.6 7.0 -0.3 -1.3 -0.2
4 133 8 1 0.000 -4.4 2.2 6.2 -0.2 -1.3 0.5
5 135 1 1 0.100 -6.1 -3.8 -13.9 0.1 -1.2 0.4
13
Bending Bending
positio
No. Code Co Co.No. Force N Force Q2 Force Q3 Torque M moment moment
n
M2 M3
6 134 3 1 0.100 -7.3 5.9 -12.2 0.1 -1.1 -0.3
7 78 3 1 0.000 -2.1 -0.7 0.7 -0.0 -1.1 -0.8
8 77 4 1 0.000 -3.3 1.2 0.6 -0.1 -0.9 1.8
9 17 3 1 0.000 -9.7 0.3 0.6 -0.0 -0.6 0.5
10 18 1 1 0.000 -9.2 -0.2 0.6 -0.0 -0.6 -0.2
The internal force of the first 10 elements with the largest bending moment M3
(unit:m,kN,kN.m)
Bending Bending
positio
No. Code Co Co.No. Force N Force Q2 Force Q3 Torque M moment moment
n
M2 M3
1 36 3 1 0.000 -0.1 3.4 0.5 -0.7 -0.3 3.7
2 45 1 1 0.600 0.0 -3.4 0.0 0.7 0.0 3.7
3 100 1 1 0.600 -13.1 -3.4 0.1 0.7 0.1 2.8
4 105 3 1 0.600 -10.8 -0.4 0.0 0.1 0.1 2.7
5 106 3 1 0.000 -10.8 0.2 -0.0 -0.1 0.1 2.7
6 107 3 1 0.000 -10.8 1.0 -0.1 -0.1 0.1 2.6
14
Bending Bending
positio
No. Code Co Co.No. Force N Force Q2 Force Q3 Torque M moment moment
n
M2 M3
7 91 1 1 0.000 -13.2 3.3 -0.1 -0.6 0.0 2.5
8 104 3 1 0.600 -10.8 -1.2 0.1 0.1 0.1 2.5
9 77 1 1 0.000 -2.7 1.4 0.2 -0.0 -0.3 2.2
10 108 3 1 0.000 -10.8 1.7 -0.1 -0.4 0.1 1.9
Internal force of the first 10 elements with the smallest bending moment M3
(unit:m,kN,kN.m)
Bending Bending
positio
No. Code Co Co.No. Force N Force Q2 Force Q3 Torque M moment moment
n
M2 M3
1 46 1 1 0.000 -0.0 -3.4 0.0 0.7 -0.0 -3.7
2 55 1 1 0.600 -0.0 3.4 -0.0 -0.7 -0.0 -3.7
3 101 3 1 0.000 -10.9 -3.5 0.2 0.7 -0.1 -3.2
4 96 1 1 0.000 -13.2 -0.3 0.0 0.1 -0.0 -2.8
5 95 1 1 0.600 -13.2 0.3 0.0 -0.1 0.0 -2.8
6 110 3 1 0.600 -10.9 3.3 -0.1 -0.8 -0.1 -2.7
7 94 1 1 0.600 -13.2 1.0 0.0 -0.1 0.0 -2.6
15
Bending Bending
positio
No. Code Co Co.No. Force N Force Q2 Force Q3 Torque M moment moment
n
M2 M3
8 97 1 1 0.000 -13.2 -1.1 0.0 0.1 -0.0 -2.6
9 77 7 1 3.000 -2.7 1.4 0.2 -0.0 0.3 -2.1
10 115 8 1 1.000 -1.1 -0.0 -0.0 0.0 -0.0 -2.0
4.2 Displacement
-9.9 -8.8 -7.7 -6.6 -5.5 -4.4 -3.3 -2.2 -1.1 0.0
Combination 1 Uz(mm)
16
-7.3 -6.5 -5.7 -4.9 -4.1 -3.3 -2.4 -1.6 -0.8 0.0
Combination 2 Uz(mm)
-9.8 -8.7 -7.6 -6.5 -5.5 -4.4 -3.3 -2.2 -1.1 0.0
Combination 3 Uz(mm)
17
-7.8 -6.9 -6.0 -5.2 -4.3 -3.4 -2.6 -1.7 -0.9 0.0
Combination 4 Uz(mm)
-7.3 -6.5 -5.7 -4.9 -4.1 -3.3 -2.4 -1.6 -0.8 0.0
Combination 5 Uz(mm)
18
-7.8 -6.9 -6.1 -5.2 -4.3 -3.5 -2.6 -1.7 -0.9 0.0
Combination 6 Uz(mm)
-7.9 -7.0 -6.1 -5.3 -4.4 -3.5 -2.6 -1.8 -0.9 0.0
Combination 7 Uz(mm)
19
-7.3 -6.5 -5.7 -4.9 -4.1 -3.2 -2.4 -1.6 -0.8 0.0
Combination 8 Uz(mm)
20
1.0
0.9
0.8
0.7
0.6
0.4
0.3
0.2
0.1
0.0
1 10 19 28 37 46 55 64 73 82 91 100 109 118 127 136
Element No.
Check calculation results of the top 10 elements with the largest "strength-stress ratio"
(Combination number/case number)
Overall Overall Shear stress Shear stress Slendern
Unit Slenderness
No. strength stability stability ratio along ratio along ess ratio Result
N0. ratio axis 3
axes 2 axes 3 the axis 2 the axis 3 axis 2
1 79 0.864 (3/1) 0.287 0.287 0.008 0.010 0 0 OK
2 80 0.757 (1/1) 0.258 0.258 0.008 0.009 0 0 OK
3 133 0.639 (8/1) 0.528 0.528 0.034 0.107 0 0 OK
4 77 0.633 (4/1) 0.195 0.195 0.012 0.005 0 0 OK
5 135 0.633 (3/1) 0.400 0.400 0.038 0.125 0 0 OK
6 78 0.594 (4/1) 0.292 0.292 0.011 0.006 0 0 OK
21
Overall Overall Shear stress Shear stress Slendern
Unit Slenderness
No. strength stability stability ratio along ratio along ess ratio Result
N0. ratio axis 3
axes 2 axes 3 the axis 2 the axis 3 axis 2
7 136 0.593 (8/1) 0.485 0.485 0.024 0.127 0 0 OK
8 36 0.592 (3/1) 0.540 0.540 0.030 0.007 0 0 OK
9 45 0.592 (3/1) 0.540 0.540 0.030 0.007 0 0 OK
10 55 0.586 (3/1) 0.509 0.509 0.030 0.005 0 0 OK
22
Overall Shear stress Shear stress Slendern
Overall stability Slenderness
No. Unit N0. strength stability ratio along ratio along ess ratio Result
axes 2 ratio axis 3
axes 3 the axis 2 the axis 3 axis 2
6 136 0.593 0.485 (8/1) 0.485 0.024 0.127 0 0 OK
7 101 0.470 0.439 (3/1) 0.439 0.032 0.003 0 0 OK
8 135 0.633 0.400 (3/1) 0.400 0.038 0.125 0 0 OK
9 96 0.409 0.391 (3/1) 0.391 0.004 0.001 0 0 OK
10 95 0.408 0.390 (3/1) 0.390 0.003 0.001 0 0 OK
According to the statistical result table of "Overall stable stress ratio around 2 axis"
Range >1.00 1.00~0.90 0.90~0.70 0.70~0.50 0.50~0.02
Units 0 0 0 5 131
percentage 0.0% 0.0% 0.0% 3.7% 96.3%
23
Shear
Overall Overall Shear stress Slendernes
stress ratio Slenderness
No. Unit N0. strength stability stability ratio along s ratio axis Result
along the ratio axis 2
axes 2 axes 3 the axis 2 3
axis 3
5 55 0.586 0.509 0.509 (3/1) 0.030 0.005 0 0 OK
6 136 0.593 0.485 0.485 (8/1) 0.024 0.127 0 0 OK
7 101 0.470 0.439 0.439 (3/1) 0.032 0.003 0 0 OK
8 135 0.633 0.400 0.400 (3/1) 0.038 0.125 0 0 OK
9 96 0.409 0.391 0.391 (3/1) 0.004 0.001 0 0 OK
10 95 0.408 0.390 0.390 (3/1) 0.003 0.001 0 0 OK
According to the statistical result table of "Overall stable stress ratio around 3 axis"
Range >1.00 1.00~0.90 0.90~0.70 0.70~0.50 0.50~0.02
Units 0 0 0 5 131
percentage 0.0% 0.0% 0.0% 3.7% 96.3%
6 Conclusion
The structure meets the requirements of the standard structure design.
Anti-typhoon wind load level 12.
Anti-earthquake level 8.
24