Professional Documents
Culture Documents
LVDS Tester
LVDS Tester
LVDS Tester
User Manual
1.Instruction:
This tester used to check screen surface status:
a. If have dead pixel
b. If have bad point area
c. This tester is a universal tester, can test most laptop screen, size between 10.1~18.4 inch.
Current 8.9" 10.0" HSD121PHW1 and some strange model screen still no the right cable to test.
If customer want test these screen, need design the right cable for these model.
www.ekt2.com
4.Testing procedure for LED and LCD(CCFL 1 lamp):
a. How to test LED screen:
www.ekt2.com
Matters need attention( for LED and LCD):
a. When use must according to our instruction
b. Step 1 the white point must face to the black arrows, if plug wrong, when light the screen the tester
and screen will damage immediately.
c. Step 4 must keep put this button on 3.3V when tester laptop screen.5V is used to tester 18.4" laptop
screen. 12V is used to tester TV screen (>22").
Don't suggest to test screen size more than 22",if need test, should add another lamp inverter, can't
use the tester lamp CCFL connector.
5.Result:
a. After connect well,the tester will change the screen picture as below:
b. Pixel detected
6.Regular Maintenance:
a. When don't use the tester, take off the power adapter connector
b. After continue test 30 minutes, take off the power adapter to let the tester have a few rest. When
tester board cool down, can test continuely.
www.ekt2.com