Professional Documents
Culture Documents
TDS AddCrete SC 1100eng
TDS AddCrete SC 1100eng
AddCrete SC 1100
Alkali Free Shotcrete Accelerator
Product Properties
liquid
alkali free
fast settings, high early strengths
optimum dosage for required early strengths
reduces dust-formation
Areas of Application
Shotcrete applied by wet - spraying
• Stabilisation in tunnelling and mining construction
• Temporary rockface stabilisation
• Hillside stabilisation
Application Notes
AddCrete SC1100 is liquid alkali free Before AddCrete SC1100, is used dosing
accelerator for shotcrete applied wet-spraying. equipment have to be cleaned with a lot of
Dosage depends of concrete and ambient water. During concreting and work breaks,
temperature, cement reactivity, strengths and system have to be closed to avoid blockage.
curing effect. Overdose can reduce final AddCrete SC1100 must not be stored in steel
strengths. containers. Storage containers have to be
AddCrete SC1100 achieves optimal results, closed tightly to avoid water evaporation which
recommendation is to use fresh cement. can resulting formation of film at surface. All
Effectiveness also caused by composition of necessary tests have to be carried out before
aggregates and additives, as well as use. Recommended dosage at range of 4 % to
water/cement ratio. 6 % calculated to cement quantity.
AddCrete SC1100 is added at nozzle.
Piston pumps are not very suitable for dosing. AddCrete SC1100 Please take a look of
No filter must be used for the suction tube to Safety Data Sheet. Please note general
avoid blockage. Constant and accurate dosing information on the use of concrete admixture.
must be ensured. After long-term storage
agitation is recommended by pressurized air to
*Can be stored 6 months in tight closed containers at temperature from +5 °C to +30 °C.