Professional Documents
Culture Documents
Support Design
Support Design
Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
S350
This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Steelbiz Licence Agreement
Generic C Sections
Note: These tables are presented for generic Z sections, which may be used
for scheme design.
Created on 16 July 2006
C-1
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 55
C-2
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 56
C-3
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 57
C-4
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 58
C-5
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 59
C-6
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 60
C-7
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 61
C-8
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 62
C-9
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 63
C - 10
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 64
C - 11
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 65
C - 12
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 66
C - 13
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 67
C - 14
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 68
C - 15
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 69
C - 16
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 70
C - 17
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 71
C - 18
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 72
C - 19
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Steelbiz Licence Agreement
[BLANK PAGE]
Created on 16 July 2006
C - 20
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
S350
This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Steelbiz Licence Agreement
Generic Z Sections
Note: These tables are presented for generic Z sections, which may be used
for scheme design.
Created on 16 July 2006
C - 21
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 73
C - 22
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 74
C - 23
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 75
C - 24
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 76
C - 25
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 77
C - 26
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 78
C - 27
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 79
C - 28
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 80
C - 29
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 81
C - 30
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 82
C - 31
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 83
C - 32
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 84
C - 33
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 85
C - 34
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 86
C - 35
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 87
C - 36
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 88
C - 37
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 89
C - 38
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
BENDING Table 90
C - 39
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Steelbiz Licence Agreement
[BLANK PAGE]
Created on 16 July 2006
C - 40
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
S350
This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Steelbiz Licence Agreement
Generic C Sections
Note: These tables are presented for generic Z sections, which may be used for
scheme design.
Created on 16 July 2006
C - 41
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
COMPRESSION Table 91
GENERIC C SECTION Depth 100 mm Thickness 1.2 mm
Design Strength 350N/mm2
C - 42
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
COMPRESSION Table 92
GENERIC C SECTION Depth 125 mm Thickness 1.2 mm
Design Strength 350N/mm2
C - 43
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
COMPRESSION Table 93
GENERIC C SECTION Depth 125 mm Thickness 1.6 mm
Design Strength 350N/mm2
C - 44
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
COMPRESSION Table 94
GENERIC C SECTION Depth 150 mm Thickness 1.6 mm
Design Strength 350N/mm2
C - 45
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
COMPRESSION Table 95
GENERIC C SECTION Depth 150 mm Thickness 1.8 mm
Design Strength 350N/mm2
C - 46
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
COMPRESSION Table 96
GENERIC C SECTION Depth 165 mm Thickness 1.6 mm
Design Strength 350N/mm2
C - 47
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
COMPRESSION Table 97
GENERIC C SECTION Depth 165 mm Thickness 1.8 mm
Design Strength 350N/mm2
C - 48
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
COMPRESSION Table 98
GENERIC C SECTION Depth 180 mm Thickness 1.6 mm
Design Strength 350N/mm2
C - 49
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
COMPRESSION Table 99
GENERIC C SECTION Depth 180 mm Thickness 1.8 mm
Design Strength 350N/mm2
C - 50
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
C - 51
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
C - 52
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
C - 53
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
C - 54
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
C - 55
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
C - 56
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
C - 57
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
C - 58
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
C - 59
Building Design Using Cold Formed Steel Sections: Structural Design to BS 5950-5:1998. Section Properties and Load Tables - Load Capacity Tables for S350 beams and columns
This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Steelbiz Licence Agreement
[BLANK PAGE]
Created on 16 July 2006
C - 60