The Go-Devil tool is used to cut slickline stuck downhole when tools cannot be moved. It has a fishing neck to avoid getting stuck. The tool is installed on slickline and dropped downhole, where it will cut the line if its cutting socket faces up or a separate cutter can be dropped to cut the line on the Go-Devil's fishing neck. It is available in various sizes to accommodate different wellbore and slickline diameters.
The Go-Devil tool is used to cut slickline stuck downhole when tools cannot be moved. It has a fishing neck to avoid getting stuck. The tool is installed on slickline and dropped downhole, where it will cut the line if its cutting socket faces up or a separate cutter can be dropped to cut the line on the Go-Devil's fishing neck. It is available in various sizes to accommodate different wellbore and slickline diameters.
The Go-Devil tool is used to cut slickline stuck downhole when tools cannot be moved. It has a fishing neck to avoid getting stuck. The tool is installed on slickline and dropped downhole, where it will cut the line if its cutting socket faces up or a separate cutter can be dropped to cut the line on the Go-Devil's fishing neck. It is available in various sizes to accommodate different wellbore and slickline diameters.
• Used to cut the slickline downhole on top of the tool string
when the tools cannot be moved.
Features:
• Cuts wire at the lowest possible point in the tubing string to
avoid fishing slickline.
• Has fishing neck.
Operation:
Remove pins or inserts and install tool on slickline. Re-install pins
or inserts and nipple up lubricator. Open BOP’s and let go-devil slide down the slickline. If a clear rope socket is looking up the go- devil will cut the slickline. If not a cutter bar should be dropped to cut the slickline on the go-devil fishing neck.