Scribd Logo
Upload

Welcome to Scribd!

  • Img 0055

    Uploaded by

    m.athallahramadhanalfisyahrin
    5 views1 page
    The document contains code to blink red, green, white and yellow LEDs connected to pins 12, 11, 10, and 9 of a microcontroller board respectively. Each LED is turned on for 1 second using digitalWrite, followed by a message printed to the serial monitor, then turned off again for 1 second and another message, repeating for each color in a loop.

    Original Description:

    Original Title

    IMG_0055

    Copyright

    © © All Rights Reserved

    Available Formats

    TXT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document contains code to blink red, green, white and yellow LEDs connected to pins 12, 11, 10, and 9 of a microcontroller board respectively. Each LED is turned on for 1 second using digitalWrite, followed by a message printed to the serial monitor, then turned off again for 1 second and another message, repeating for each color in a loop.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as txt, pdf, or txt
    5 views1 page

    Img 0055

    Uploaded by

    m.athallahramadhanalfisyahrin
    The document contains code to blink red, green, white and yellow LEDs connected to pins 12, 11, 10, and 9 of a microcontroller board respectively. Each LED is turned on for 1 second using digitalWrite, followed by a message printed to the serial monitor, then turned off again for 1 second and another message, repeating for each color in a loop.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as txt, pdf, or txt
    of 1

    digitalWrite(12, HIGH);

    Serial.println("LED Merah Nyala");

    delay (1000); // Wait for 1000 millisecond(s)


    digitalWrite(12, LOW);

    Serial.println("LED Merah Mati");

    delay (1000); // Wait for 1000 millisecond(s)


    digitalWrite(11l, HIGH);

    Serial.println("LED Hijau Nyala");

    delay (1000); // Wait for 1000 millisecond(s)


    digitalWrite(11l, LOW);

    Serial.println("LED Hijau Mati");

    delay (1000); // Wait for 1000 millisecond(s)


    digitalWrite (10, HIGH);

    Serial.println("LED Putih Nyala");

    delay (1000); // Wait for 1000 millisecond(s)


    digitalWrite(10, LOW);

    Serial.println("LED Putih Mati");

    delay (1000); // Wait for 1000 millisecond(s)


    digitalWrite(9, HIGH);

    Serial.println("LED Kuning Nyala");

    delay (1000); // Wait for 1000 millisecond(s)

    digitalWrite(9, LOW); // Wait for 1000 milisecond(s)

    Serial.println("LED Kuning Mati");

    delay (1000); // Wait for 1000 millisecond(s)

    You might also like