Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Technical Data Sheet

SUKANO®C me S837
IV enhancer MB for PC

1. Masterbatch Properties
Properties Unit Typical value
Polymer PC (Polycarbonate)
Additives Reactive chain extender system
Glass transition temperature (DSC) °C approx. 145
Specific gravity at 20°C g / cm³ approx. 1.3
Bulk density kg / m³ approx. 600
Surface moisture % max. 0.5
Pellet size mm approx. 3.2 (length)
Form of delivery White, transluscent pellets
Method of packaging 25kg PE bags, octabins, big bags

2. Processing References
Parameter Recommendation
Processing technology Film extrusion; Sheet extrusion
Processing temperature For gelfree polymer chain extension, the masterbatch and the polyester shall be homogeneously
mixed using high shear and low melt temperature.
Drying 4 hours @ 60°C
The use of a dehumidifying air dryer with dew point -40°C, as well as material conveying with dry air,
is recommended.
Poor drying will reduce the efficiency of the melt viscosity enhancer masterbatch.
Dosage 0.5 - 2.0%
The most efficient dosage needs to be determined by customer trials and based on test results.
Storage Reclose opened bags and store at room temperature in a dry area, avoiding direct sunlight.

3. End use and Characteristics


Application Properties
Regulatory compliance For detailed information please refer to the regulatory status information.

Revision: 18.05.2022 1/1

Sukano Sdn.Bhd. shall not be responsible for the use, accuracy and completeness of the information offered, or of any product, method, or apparatus mentioned, and
you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of
your employees and purchasers of your products. Sukano Sdn.Bhd. does not take any responsibility or liability for any information offered herein. The responsibility
regarding the observance of third-party rights in the course of a subsequent processing and marketing of our products lies with the buyer. SUKANO® is a registered
trademark of Sukano Finance AG, Switzerland.

© Sukano Sdn. Bhd. • No. 7 Jalan Hasil, Kawasan Perindustrian Jalan Hasil • 81200 Johor Bahru • Johor • Malaysia • Tel. +607 238 60 99 • Fax +607 234 57 70 •
www.sukano.com

You might also like