Professional Documents
Culture Documents
Asset - PDF - 25904681 2
Asset - PDF - 25904681 2
Asset - PDF - 25904681 2
2
Machine Translated by Google
Please note •
The marking 50/70/80 on the back of the stainless screw A2/A4 means the strength class. As the
number increases, the strength increases. PROF stainless A2/A4 screws have strength class 70, which
achieves a cost-effective balance of strength and toughness suitable for the purpose
of use. • We recommend choosing a screw at least twice as long as the thickness of the board to be attached.
You can get the most durable fastening by choosing a screw whose threadless shank length is as long as the thickness of the
board. • We
recommend the use of an impact screwdriver for stainless screws, so that greater friction than carbon steel screws does not cause the
screw to break during installation.
• Siberian larch and exotic wood varieties as well as heat-treated boards should always be fixed with stainless fasteners.
• Outdoor structures important for personal safety always require stainless steel or
acid-resistant fasteners. • Pre-
drilling improves the durability of the screw and makes the installation trace finished, regardless of the material. • Fasteners used
together must always be of the same material. • The terrace board must be attached
to the frame with two screws / joint. The number of screws per square meter (m2) depends on the division of the frame trees, the space
between the frame trees, the gap between the terrace boards and the width of the terrace board.
As a rule of thumb, a 95 mm wide terrace board uses about 40 screws per m2, a 120 mm wide board 30 screws per m2 and a 145 mm
wide board 25 screws per m2.
3
Machine Translated by Google
FIXTURES FOR GARDEN CONSTRUCTION
SCREWS
UNIVERSAL SCREW SUNSET HEAD TX RST A2-70
A2-70 stainless countersunk universal screw with torx slot for indoor and
outdoor use. The screw has a waxed surface that reduces friction. PROF
stainless universal screws are CE-marked according to the EN14592 standard
UNIVERSAL SCREW PROF SUNSET TX C4 and approved for load-bearing wooden structures.
FOR INDOOR AND OUTDOOR USE
Product number Torx Dimensions (mm) Package size
Multi-layer coated and C4High corrosion class approved universal screw with 502016259 T20 4 X 20 200
countersunk head for indoor and outdoor use. The screw has a specially 502016260 T20 4 X 25 200
designed countersunk base and a snappy torx slot. The thread length is optimal
502016261 T20 4 X 30 200
with the general wood dimensions. A less frequent thread than usual, the Sura
cut of the thread and the milling knurling after the thread make the screw really 502016262 T20 4 X 35 200
fast and easy to screw. The special tip pulls the screw into the wood quickly, 502016263 T20 4 X 40 200
and it also comes with plugs. Made of tough hardened steel C10B21. CE-marked
based on ETA assessment and approved for load-bearing wooden structures. 502016264 T20 4 X 50 200
502202903 T30 6 X 100 100 A2-70 stainless domed universal screw with torx slot for indoor and outdoor
502206713 T30 6 X 110 100 use. The screw has a waxed surface that reduces friction. PROF stainless domed
universal screws are CE-marked according to the EN14592 standard and
502202904 T30 6 X 120 100
approved for load-bearing wooden structures.
502206714 T30 6 X 130 100
502206715 T30 6 X 140 100 Product number Torx Dimensions (mm) Package size
4
Machine Translated by Google
HIDDEN FASTENING
Concealed fastening refers to screwing from the side of the board using a screwing guide. The end result is an invisible attachment of terrace boards. Suitable for
pressure impregnated and heat-treated wood, larch, hardwood, composite, etc. The PROF screw driver is suitable for all board widths. A 60 mm long screw is best
suited for a 21–28 mm thick deck board.
502227777 STEEL SCREW FOR HIDDEN FIXING A2-70 T15 4.8 X 60 200
Stainless PROF A2-70 terrace screw. The cutting tip facilitates drilling in the
screws and its flat base guarantees a neat installation mark on the surface of
the wood. A2 terrace screws are soft and withstand wood movement well.
CE-marked according to the EN14592 standard and approved for load-
bearing wooden structures.
5
Machine Translated by Google
FIXTURES FOR GARDEN CONSTRUCTION
Stainless AISI 410 terrace screw with colored coating. The screw has a cutting tip and serrated
edge thread that reduces splitting of the wood and facilitates drilling, and a countersunk base that
guarantees a clean gunk mark on the surface of the wood. AISI410 terrace screws are
hardened, i.e. hard. In addition, AISI410 screws are magnetic. CE-marked according to the
EN14592 standard and approved for load-bearing wooden structures.
The stainless A2-70 and AISI410 band screw is suitable for outdoor use. Tested and works with the
most common tape screwdrivers. All PH2 career. 50 pieces of screws in one strip, 20 pieces of
strips in a package - i.e. 1000 pieces of screws in total. Phillips career. CE marked.
6
Machine Translated by Google
OTHER SCREWS
The fence screw is a stainless AISI410 screw with torx slot, white coated. The pier screw is an especially seawater-resistant A4-70 acid-resistant torx slotted
screw. The skylight screw is equipped with wings that make a free hole in the skylight that allows the skylight to move according to temperature changes. The light
cover screw is C4-coated to prevent rusting. With the screw anchor, you can easily attach to concrete, lightweight concrete, brick, stone and plasterboard without a
plug. Also suitable for plywood and wood. The screw coating has C4High corrosion class approval. Suitable for indoor and outdoor use.
Product number Product name Torx Dimensions (mm) Color Package size
INFO
The screw with a cutting tip breaks the grain of the wood when drilling, which reduces the risk of splitting the wood. The cutting tip also starts immediately
to pull the screw into the wood – so the work is faster. The screw on the countersunk base makes a recessed chamfer for the base, so there are no sticks
around the base and the installation looks finished.
7
Machine Translated by Google
FIXTURES FOR GARDEN CONSTRUCTION
BUILDING BRACKET
ANCHOR SCREWS
The Torx-slotted anchor screw is suitable for fastening construction fasteners such as angle plates and beam shoes.
PROF anchor screws are CE-marked according to the EN14592 standard and approved for load-bearing wooden structures.
Stainless corner plates and beam shoes last in exposed environments and do not corrode in contact with pressure-saturated
wood.
8
Machine Translated by Google
PILLAR SHOES
The hot-dip galvanized pillar shoe is intended for attaching the pillar to the concrete casting, suitable for outdoor use. Pillar shoes with a straight brush steel shaft are
suitable for both immersion in castings and borehole installations, for example in rock. Pillar shoes equipped with a folded tube are suitable for immersion in casting.
9
Machine Translated by Google
FIXTURES FOR GARDEN CONSTRUCTION
PROF hot-dip galvanized spiral pile is a fast, easy and durable foundation method for various construction needs, for example for a terrace, dock, warehouse, fence or carport.
The foundation work is started by making an approximately 30 cm deep starting hole in the ground, after which the pile is installed by turning it clockwise using a screw pile
twisting tool and an iron rod. Can also be installed by machine with caution. Pay attention to possible cables and cables.
The spiral pile can be installed in tight spaces and the work does not cause vibration or noise pollution.
The spiral pile is best suited for clay and sandy soil. Frost insulation can be avoided when the threaded flange is screwed below the frost line.
The installation interval is usually one to three meters, depending on the soil and the weight on the pile. Determining the exact bearing capacity requires a soil investigation.
In licensed constructions, the structural engineer determines the number of spiral piles and the installation interval.
A wide range of fasteners are available for screw piles, to which the desired structure can be attached. In addition, our selection includes a 900 mm extension pole, which can
be used to extend the length of the spiral pile. For a more precise height adjustment of about 100 mm, we recommend a height-adjustable bracket that is hammered onto the end of
the threaded post, to which you can connect the M10 flange L-angle bracket or the adjustable U-bracket. The height of the spiral pile is adjusted by turning it clockwise. If necessary,
the pile can also be turned up and used again.
10
Machine Translated by Google
TERRACE FEET
The adjustable terrace leg is handy, e.g. for the foundations of a terrace, playhouse, wooden litter box, outdoor storage or garbage shed. The adjustability helps even
out the unevenness of the ground base and the direct construction of the frame. Post-adjustment is also possible if necessary.
The terrace legs are made of durable polypropylene, which is a light and durable material. The terrace legs are easy to handle and transport even to more difficult places.
At best, the terrace legs are on a rust-free and load-bearing base, e.g. on a flat rock or on concrete slabs. The stony nature of the soil also does not cause problems thanks to
the surface installation. Groundwork should be done according to the soil, e.g. in frosty ground it is recommended to use frost insulation.
Terrace legs are installed approximately every 0.5–0.8 meters to make the structure sturdy. It is recommended to attach the terrace legs to the substrate, e.g. to a
concrete slab, with screw anchors coated with the base plate attachment holes. The frame of the terrace can be built immediately after installing the terrace legs. The frame
timbers of the terrace should be fixed using the fixing holes in the upper part of the terrace leg. The width of the mounting base is 80 mm. The frame can be strengthened
with girders and corner plates.
The hot-dip galvanized terrace foot is suitable for the spiral pile U-pillar and flat brackets with an L angle, as well as a hammer-on adjustable bracket. Tube size 60 x 3 mm.
Product number Height Mounting holes, Base Fixing holes, top Recommended Installation gap Material Package size
base plate diameter max.
load
11
Machine Translated by Google
Manufacturer: Kesko Oyj, Building and building technology shop PO Box 1, 00016 KESKO.
Due to continuous product development, we reserve the right to make changes.
5/2022 SAP no: 502432423 ME:20