Professional Documents
Culture Documents
PCM 3.1-Panamеra (1) interface
PCM 3.1-Panamеra (1) interface
Instruction Manual
(For Porsche Panamera PCM 3.1)
-. MODEL: LVTX-STD-V1.0
-. P/N : LVSTD-0901-000
- Be sure to start installation with ignition key pulled out from the car and interface
power should be connected after all work done.
- All supplied cables have to be connected before connecting interface power cable.
- All work has to be done in a place no electronic devices and magnetic damages
around the installation place.
- Warranty seal attached on the interface board shall not be broken without any
permission of manufacturer, If broken, no warranty acceptable.
- When receiving this product, make sure all parts are in the box, if any parts
missing, kindly contact our sales staff in charge of.
2. Output Spec.
-. 1 x Cayenne Output
-. 4 x Audio Select (12V power comes out from 4wires of cable by video, Navi mode)
3. Power Spec.
- Input Power : 10VDC ~ 18VDC
- Consumption Power : 5WATT in Max
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩
① ② ③ ④ ⑤ ⑥ ⑦
① ACC (Red)
② GND (Black)
① R DATA (Red)
③ REAR-C (Grey)
② G DATA (Green)
④ SAFE (Purple)
③ B DATA (Blue)
⑤ CAN(H)(White)
⑥ CAN(L)(Yellow) ④ SYNC (White)
⑦ NAVI SEL (Blue) ⑤ GND (Black)
⑧ AV1-SEL (Green) ⑥ N.C
⑨ AV2-SEL (Brown) ⑦ N.C
⑩ AV3-SEL (Orange)
FILTER
& FUSE BOX
ACC
GND
REAR-C
SAFE
CAN(H) (for FMTX Antenna)
CAN(L) (Not available)
NAVI Sel
AV1-Sel
AV2-Sel
AV3-Sel
5 N.C
6 N.C
ON : Mode Switching ;
OEM-OEM-RGB-AV1~3
8 To select original NAVI (This is for original Navi)
OFF : Mode Switching ;
OEM-RGB-AV1~3
IMAGE Menu
- BRIGHTNESS
- CONTRAST
- SATURATION
- HUE
- SHARPNESS
- USER IMAGE
OSD Menu
- LANGUAGE
- OSD TRANS
- OSD H_POS
- OSD V_POS
UTIL Menu
- FACTORY RESET
Factory Mode
- IMAGE : - H-POSITION : You can adjust displayed Image to Left or Right in each AV source
- V-POSITION : You can adjust displayed Image to Up or Down
Factory Mode
Head Unit
Button Cable
LED DIP S/W KEYPAD LCD OUT (For using
original button)
Head Unit
Sub
LVDS VIDEO INTERFACE Board
FPC
cable
AV3-SEL
AV2-SEL
AV1-SEL
NAVI SEL
CAN(L)
CAN(H)
SAFE
REAR C
AV1
AV2
AV3
AV/OUT
REAE-C
GND
ACC
R G B S G
Y N AUDIO R
N D
C
AUDIO L
VIDEO
Y Y R W
e e E h
-14-
-Installation
1. OEM Factory FPC Cable Removal
As pictures, connect the wire from the button cable to the sub-board.
3. When displayed color of screen is not proper. (If it’s too dark or the color is not proper)
-. Try to push “Reset button” on the remote control. If the color of screen keeps on displaying wrong
color, you have to ask manufacturer for the problem.
-. Try to adjust Color, Contrast, Brightness by the remote.