Professional Documents
Culture Documents
Sec - PS1
Sec - PS1
INSTRUCTION: Select the correct answer 5. the axial force in member DE, in kN
for each of the following questions. Mark A. 14, T C. 17.5, T
only one answer for each item by shading B. 14, C D. 17.5, C
the box corresponding to the letter of
6. the axial force in member FG, in kN.
your choice on the answer sheet provided.
A. 46, T C. 28.3, T
STRICTLY NO ERASURES ALLOWED. GOOD LUCK. B. 46, C D. 28.3, C
A B A
C α
θ
8 m
D
W
B 5 m
X
C
1. Find the largest weight, W (kN), that 2.5 m
can be carried by the wires if the
Z
maximum stress in the wires is not to
exceed 124 MPa.
A. 19.14 C. 16.91 7. Which of the following most nearly
B. 15.62 D. 22.04 gives the force at cable AB, in N?
A. 247.67 C. 458.97
2. If the weight W = 25 kN, what is the B. 294.84 D. 436.35
resulting stress in wire AC (MPa)?
A. 161.96 C. 198.35 8. Which of the following most nearly
B. 114.52 D. 158.28 gives the force at cable AD, in N?
A. 247.67 C. 546.39
3. If the weight W = 25 kN, determine the B. 436.35 D. 294.84
required cross-sectional area (sq. mm)
of the wires so that the max stress 9. Which of the following most nearly
does not exceed 124 MPa. gives the force at cable AC, in N?
A. 148 C. 105 A. 294.84 C. 458.97
B. 181 D. 127 B. 546.39 D. 247.67
Situation 2. Diagonals BE, CD, DG, and EF Situation 4. A right-angled rigid pipe is
of the truss shown in the figure can fixed to a wall at A and is
resist tension only. Find the additionally supported through the
following: cable CD as shown in the figure. The
tension in the cable is 3 kN.
https://www.facebook.com/reviewinnovations.davaobranch
NOVEMBER 2022 CE BOARD EXAM REFRESHER ALVAREZ 1
10. Neglecting the weight of the pipe,
which of the following most nearly
gives the largest shear force (in kN)
on the pipe’s cross section?
A. 3.00 C. 2.71
B. 1.28 D. 2.97
3 m 6 kN
750 N/m
0.5 m 2 m 2 m 2.5 m